1: \subsection{Primary vertex}
2:
3: The primary (or hard scatter) vertex of the event is reconstructed in three
4: steps. At the first step, we locate a beam spot position using
5: reconstructed tracks with the transverse momentum of $p_T>0.5~\rm{GeV}$. These
6: tracks should have at least two hits in the SMT detector and the significance
7: of the distance of closest approach $S_{\mathrm{dca}}=|dca/\sigma_{\mathrm{dca}}|<100$.
8: The distance of closest approach $(dca)$ is
9: calculated with respect to the center of the detector in the plane
10: transverse to the beamline.
11: At the second step, we impose a more stringent requirement on the tracks,
12: $S_{\mathrm{dca}}<3$, where $S_{\mathrm{dca}}$ is calculated with respect to the beam spot
13: determined in the previous
14: step. These tracks are then used to fit the final primary vertices.
15: We use information on the position of these tracks along the
16: beamline to identify tracks belonging to different interactions and build
17: clusters of the tracks within 2 cm from each other. All tracks in each cluster
18: are fitted to a common vertex using the Kalman filter technique~\cite{kalman}.
19: Finally, to distinguish the position of the hard scatter interaction from
20: the simultaneously produced minimum bias scatters, a minimum bias probability is
21: computed for each reconstructed vertex based on the transverse
22: momenta and the total number of associated tracks. The primary vertex with the
23: lowest minimum bias probability is selected as the hard scatter.
24:
25: The primary vertex finding algorithm reconstructs vertices in the fiducial region
26: of the SMT with an efficiency close to 100\%.
27: The position resolution, measured in data as a difference between the reconstructed vertex
28: position and the position of the beam spot center, depends on the number of tracks
29: fitted to the primary vertex and is around $40~\rm{\mu m}$ in the plane transverse to the
30: beam direction. It is dominated by the beam spot size of about $30~\rm{\mu m}$.
31:
32: For the analysis, we select events with the primary vertex within the SMT
33: fiducial region $|z_{\mathrm{PV}}| \le 60~\rm{cm}$ and at least three tracks attached
34: to the vertex.
35:
36: %To describe the primary vertex efficiency in the data with the simulation,
37: %correction factors of $1.04 \pm 0.003$ and $0.991 \pm 0.004$
38: %are derived in the electron and the muon channel from $Z\rightarrow ee$ and
39: %$Z \rightarrow \mu \mu$ events respectively and applied to the simulation.
40: