1: %%
2: %% Beginning of file 'sample.tex'
3: %%
4: %% Modified 2005 December 5
5: %%
6: %% This is a sample manuscript marked up using the
7: %% AASTeX v5.x LaTeX 2e macros.
8:
9: %% The first piece of markup in an AASTeX v5.x document
10: %% is the \documentclass command. LaTeX will ignore
11: %% any data that comes before this command.
12:
13: %% The command below calls the preprint style
14: %% which will produce a one-column, single-spaced document.
15: %% Examples of commands for other substyles follow. Use
16: %% whichever is most appropriate for your purposes.
17: %%
18: %%\documentclass[12pt,preprint]{aastex}
19:
20: %% manuscript produces a one-column, double-spaced document:
21:
22: \documentclass[12pt,preprint]{aastex}
23:
24: %% preprint2 produces a double-column, single-spaced document:
25:
26: %% \documentclass[preprint2]{aastex}
27:
28: %% Sometimes a paper's abstract is too long to fit on the
29: %% title page in preprint2 mode. When that is the case,
30: %% use the longabstract style option.
31:
32: %% \documentclass[preprint2,longabstract]{aastex}
33:
34: %% If you want to create your own macros, you can do so
35: %% using \newcommand. Your macros should appear before
36: %% the \begin{document} command.
37: %%
38: %% If you are submitting to a journal that translates manuscripts
39: %% into SGML, you need to follow certain guidelines when preparing
40: %% your macros. See the AASTeX v5.x Author Guide
41: %% for information.
42:
43: \newcommand{\vdag}{(v)^\dagger}
44: \newcommand{\myemail}{c.lane2@nuigalway.ie}
45:
46: %% You can insert a short comment on the title page using the command below.
47:
48: %%\slugcomment{Accepted for publication in Astrophysical Journal Letters}
49:
50: %% If you wish, you may supply running head information, although
51: %% this information may be modified by the editorial offices.
52: %% The left head contains a list of authors,
53: %% usually a maximum of three (otherwise use et al.). The right
54: %% head is a modified title of up to roughly 44 characters.
55: %% Running heads will not print in the manuscript style.
56:
57: \shorttitle{Rotational Modulation of M/L Dwarfs}
58: \shortauthors{Lane et al.}
59:
60: %% This is the end of the preamble. Indicate the beginning of the
61: %% paper itself with \begin{document}.
62:
63: \begin{document}
64:
65: %% LaTeX will automatically break titles if they run longer than
66: %% one line. However, you may use \\ to force a line break if
67: %% you desire.
68:
69: \title{Rotational Modulation of M/L Dwarfs due to Magnetic Spots}
70:
71: %% Use \author, \affil, and the \and command to format
72: %% author and affiliation information.
73: %% Note that \email has replaced the old \authoremail command
74: %% from AASTeX v4.0. You can use \email to mark an email address
75: %% anywhere in the paper, not just in the front matter.
76: %% As in the title, use \\ to force line breaks.
77:
78: \author{C. Lane\altaffilmark{1}, G. Hallinan\altaffilmark{1}, R. T. Zavala\altaffilmark{2}, R. F. Butler\altaffilmark{1}, R. P. Boyle\altaffilmark{3}, S. Bourke\altaffilmark{1},\\ A. Antonova\altaffilmark{4}, J. G. Doyle\altaffilmark{4}, F. J. Vrba\altaffilmark{2}}
79: %%\affil{Astronomy Department, University of California,Berkeley, CA 94720}
80:
81: %%\author{C. D. Biemesderfer\altaffilmark{4,5}}
82: %%\affil{National Optical Astronomy Observatories, Tucson, AZ 85719}
83: %%\email{aastex-help@aas.org}
84:
85: \and
86:
87: \author{A. Golden\altaffilmark{1}}
88: %%\affil{Space Telescope Science Institute, Baltimore, MD 21218}
89:
90: %% Notice that each of these authors has alternate affiliations, which
91: %% are identified by the \altaffilmark after each name. Specify alternate
92: %% affiliation information with \altaffiltext, with one command per each
93: %% affiliation.
94:
95: \altaffiltext{1}{Centre for Astronomy, National University of Ireland, Galway, Ireland; c.lane2@nuigalway.ie, gregg@it.nuigalway.ie, ray.butler@nuigalway.ie, stephen@it.nuigalway.ie, agolden@it.nuigalway.ie}
96: \altaffiltext{2}{United States Naval Observatory, Flagstaff Station, 10391 West Naval Observatory Road, Flagstaff, AZ 86001; bzavala@nofs.navy.mil, fjv@nofs.navy.mil}
97: \altaffiltext{3}{Vatican Observatory Research Group, Steward Observatory, University of Arizona, Tucson, AZ 85721; boyle@ricci.as.arizona.edu}
98: \altaffiltext{4}{Armagh Observatory, College Hill, Armagh BT619DG, N. Ireland; tan@arm.ac.uk, jgd@arm.ac.uk}
99:
100: %% Mark off your abstract in the ``abstract'' environment. In the manuscript
101: %% style, abstract will output a Received/Accepted line after the
102: %% title and affiliation information. No date will appear since the author
103: %% does not have this information. The dates will be filled in by the
104: %% editorial office after submission.
105:
106: \begin{abstract}
107: We find periodic I-band variability in two ultracool dwarfs, \object{TVLM 513-46546} and \object{2MASS J00361617+1821104}, on either side of the M/L dwarf boundary. Both of these targets are short-period radio transients, with the detected I-band periods matching those found at radio wavelengths (P=1.96 hr for TVLM 513-46546, and P=3 hr for 2MASS J00361617+1821104). We attribute the detected I-band periodicities to the periods of rotation of the dwarfs, supported by radius estimates and measured $v$ sin $i$ values for the objects. Based on the detected period of rotation of TVLM 513-46546 (M9) in the I-band, along with confirmation of strong magnetic fields from recent radio observations, we argue for magnetically induced spots as the cause of this periodic variability. The I-band rotational modulation of L3.5 dwarf 2MASS J00361617+1821104 appeared to vary in amplitude with time. We conclude that the most likely cause of the I-band variability for this object is magnetic spots, possibly coupled with time-evolving features such as dust clouds.
108: \end{abstract}
109:
110: %% Keywords should appear after the \end{abstract} command. The uncommented
111: %% example has been keyed in ApJ style. See the instructions to authors
112: %% for the journal to which you are submitting your paper to determine
113: %% what keyword punctuation is appropriate.
114:
115: \keywords{stars: low-mass, brown dwarfs --- stars: rotation --- stars: spots --- stars: variables: general}
116:
117: %% From the front matter, we move on to the body of the paper.
118: %% In the first two sections, notice the use of the natbib \citep
119: %% and \citet commands to identify citations. The citations are
120: %% tied to the reference list via symbolic KEYs. The KEY corresponds
121: %% to the KEY in the \bibitem in the reference list below. We have
122: %% chosen the first three characters of the first author's name plus
123: %% the last two numeral of the year of publication as our KEY for
124: %% each reference.
125:
126:
127: %% Authors who wish to have the most important objects in their paper
128: %% linked in the electronic edition to a data center may do so by tagging
129: %% their objects with \objectname{} or \object{}. Each macro takes the
130: %% object name as its required argument. The optional, square-bracket
131: %% argument should be used in cases where the data center identification
132: %% differs from what is to be printed in the paper. The text appearing
133: %% in curly braces is what will appear in print in the published paper.
134: %% If the object name is recognized by the data centers, it will be linked
135: %% in the electronic edition to the object data available at the data centers
136: %%
137: %% Note that for sources with brackets in their names, e.g. [WEG2004] 14h-090,
138: %% the brackets must be escaped with backslashes when used in the first
139: %% square-bracket argument, for instance, \object[\[WEG2004\] 14h-090]{90}).
140: %% Otherwise, LaTeX will issue an error.
141:
142: \section{Introduction}
143: The term ultracool dwarf encompasses very low mass stars and brown dwarfs, covering spectral types late-M, L and T. As the temperature decreases, spectral type moves from M to L, with the characteristic TiO and VO bands of M dwarf spectra becoming replaced by broad neutral alkali and iron hydride lines in L dwarfs at roughly 2000 K (Kirkpatrick et al., 2000). Although the change in spectral features in progressing between spectral types M and L is well characterised, the processes occurring in their cool, neutral atmospheres are not fully understood. Also uncharacterised are any differences in the physical nature or extent of surface features.
144:
145: One of the main reasons for photometric variability studies of late-M and L dwarfs is to probe the physical nature of their atmospheres. Ultracool dwarf variability is generally attributed to two sources: the presence of magnetic spots, or dust clouds (Mart\'{i}n et al., 2001; Gelino, 2002 (G02); Rockenfeller et al., 2006 (R06)). Surface features such as magnetic spots or dust clouds may cause optical modulation as the object rotates, and in certain cases allow a measurement of the period of rotation of a dwarf. For either of these scenarios to be accepted as the dominant source of photometric variability for a particular ultracool dwarf, they must explain the type of variability observed, whether it is aperiodic or periodic. It is sometimes possible to constrain the probable cause of variability for an object, by comparing multiwavelength photometry to photometric signatures generated using atmospheric models such as those of Allard et al. (2001). This method has recently been used to indicate magnetically induced cool spots as the most likely cause of periodic variability (P=3.65 $^+_-$ 0.1 hr) in the M9V dwarf 2MASS 1707+64 (R06).
146:
147: There are indications of changes in the physical nature or the extent of surface features when moving from spectral type M to L. Time-resolved photometry of a statistical sample of M and L dwarfs in directly comparable datasets suggests that variability is more common in L dwarfs than late-M dwarfs (Bailer-Jones and Mundt 2001 (BJM01); R06). Other photometric studies have demonstrated a high level of L dwarf variability, with a large-scale L dwarf survey reporting variability in 7 out of 18 L dwarfs at the 95.4$\%$ confidence level, with a further five targets showing variability at confidence levels of $\sim$ 80$\%$ (G02).
148:
149: Another characteristic of L dwarf photometric variability is a lack of stability in both periodicity and amplitude. Aperiodic variability is the dominant type of L dwarf variability found in the surveys by BJM01 and G02. Two of the seven variables in the latter survey, 2MASS 0746+20AB and 2MASS 1300+19, displayed significant peaks in a CLEAN periodogram (Roberts et al., 1987), but did not display persistent periodicity throughout the dataset. Koen (2006) reported a 2.4 hr periodicity for 2MASS 0605-22342, which persisted over 3 days, but decreased significantly in amplitude throughout the observations. This apparent paucity of stable periodic variability may be linked to spectral type, although there has been no long-timescale monitoring of ultracool dwarf variability to establish this statistically.
150:
151: It has been suggested that rapid evolution of atmospheric features such as dust clouds is the most likely cause of observed aperiodic variability in L dwarfs (G02). However, it may be possible that magnetic spots on L dwarfs also produce significant periodic modulation, but that evolving features such as dust obscure the underlying period. One theory which may explain the characteristics of L dwarf variability is the masking hypothesis, proposed by BJM01, which suggests that if the time scale of evolving surface features is shorter than the period of rotation of an object, the periodic modulation of its lightcurve will be inhibited. In order to assess the validity of such theories of variability for a particular object, constraints on the value of its period of rotation from $v$ sin $i$ measurements and radius estimates are extremely useful. Limits on the period of rotation determine whether a period detected in photometric timeseries is rotational, and allow an evaluation of the stability of the photometric periodicity in relation to it.
152:
153: Recent Very Large Array (VLA) observations of the M9 dwarf TVLM 513-46546 (hereafter TVLM 513) provided evidence of a 1.96 hr stable periodicity (Hallinan et al., 2006, 2007 (H06 \& H07)). This periodicity was found to be consistent with a coherent radiation mechanism generated via the electron cyclotron maser instability operating in the low plasma density regions above the magnetic poles of the dwarf, requiring TVLM 513 to possess extremely strong ($\sim$ kG) magnetic fields. Such strong fields were later confirmed for other ultracool dwarfs by Reiners and Basri (2007). H06 also argues that the L3.5 dwarf 2MASS J00361617+1821104 (hereafter 2MASS J0036+18) requires the same mechanism to explain the properties of its radio emission (Berger, 2005 (B05)), which are almost identical to those of TVLM 513.
154:
155: The extremely strong magnetic fields of TVLM 513, and most likely for 2MASS J0036+18, might be expected to produce the necessary temperature gradient to create magnetic spots, thus causing photometric modulation. Consequently, we decided to photometrically monitor these dwarfs on either side of the M/L boundary for I-band variability.
156:
157: \section{Data Acquisition \& Observations}
158: \subsection{Supporting Radio Data}
159: The supporting radio observations discussed in this paper involve $\sim$ 10 hours of VLA observations of TVLM 513 at a frequency of 8.4 GHz on 2006 May 20th and $\sim$ 10 hours at a frequency of 4.9 GHz on 2006 May 21st. These observations and the accompanying results are detailed in H07. The 4.9 GHz radio data of 2MASS J0036+18 is that of B05, and was obtained from the VLA archives (project AB1052).\\
160:
161: \subsection{I-band Observing Strategy}
162: Choices made with regard to the optical observations are as follows: (1) the TVLM 513 observations were chosen to coincide with the nights of additional VLA observations (H07), (2) due to the very red optical colours of these dwarfs, the I-band was chosen to monitor these objects for variability, (3) high time-sampling was performed for sensitivity to the rotational modulation of these rapid rotators.
163:
164: \subsection{TVLM 513 Observations}
165: The four-night photometric campaign of TVLM 513 ($m_I \sim 15.09$) was carried out between 2006 May 18th and 21st, UT. Observations were performed on the United States Naval Observatory (USNO) 1m reflector, Flagstaff, Arizona from May 18th - 20th. A Tektronix 2048 $\times$ 2048 CCD was used, with pixel scale of 0.68\arcsec/pixel giving a field of view of 23\arcmin $\times$ 23\arcmin. An imaging cadence of $\sim$ 3 mins was achieved over the $\sim$ 6 hours of observations on each night. Additional observations were carried out on May 20th and 21st at the 1.8m Vatican Advanced Technology Telescope (VATT) at Mount Graham, Arizona. A back-illuminated Loral CCD was windowed to a 512 $\times$ 512 pixel frame (field of view=1.7\arcmin $\times$ 1.7\arcmin) to reduce readout time. This CCD showed evidence of fringing above the sky noise level in the I-band, so frames were dithered to allow removal of fringing during the data reduction. An imaging cadence of $\sim$ 1 min was obtained for the May 21st dataset. Unfortunately, due to telescope tracking problems, the data obtained on May 20th were of poor quality and were not used in the analysis.
166:
167: \subsection{2MASS J0036+18 Observations}
168: Photometric observations of 2MASS J0036+18 ($m_I \sim 16.05$) were carried out on 2006 September 19th UT, using the USNO 1.55m reflector at Flagstaff, Arizona. The detector used was the Tek2K CCD, providing an image scale of 0.33\arcsec/pixel and an 11$\arcmin$ $\times$ 11$\arcmin$ field of view. Over the $\sim$ 7.5-hour observation of 2MASS J0036+18, well-exposed images were obtained every $\sim$ 8 mins.
169:
170: \section{Data Reduction}
171: \subsection{Basic Reduction}
172: Science frames of TVLM 513 and 2MASS J0036+18 were processed using standard IRAF\footnote[1]{Image Reduction and Analysis Facility.}/PyRAF data reduction techniques and the USNO on-site reduction pipeline. Bias subtraction and flat-fielding were carried out on all frames. The 2MASS J0036+18 data were also linearized using the Tek2K linearity curve. The fringing pattern of the VATT CCD was found to be stable, and its removal was carried out by producing a fringe-correction frame from the median of a large number of dithered, reduced science frames.
173:
174: \subsection{$I$-band Differential Photometry}
175: Differential photometry was carried out on all datasets in order to achieve photometric precision of the order of milli-magnitudes through the reduction of atmospheric effects. Aperture photometry was carried out on the targets and a selection of reference stars, chosen on the basis of their stability, linearity, isolation on the frame, and having a similar magnitude to the target. Apertures were chosen to provide the highest signal to noise for the target. Standard differential photometry techniques were used, similar to those outlined in BJM01, and summarized below. Time series of relative magnitudes ($m_{rel}$) were calculated as follows: If F$_i$ is the instrumental flux for reference star i, with range of reference stars i=1...M, then the relative flux of the r$th$ frame (F$_r$) is:
176: \begin{equation}
177: F_r = \frac{1}{M}\sum_{i}^{M} F_i
178: \end{equation}
179:
180: The $m_{rel}$ values were calculated as follows, from corresponding target and relative magnitudes, m$_t$ and m$_r$, where F$_t$ is the measured flux of the target: \begin{math}m_{rel} = m_t - m_r = 2.5 log_{10} (F_r/F_t)\end{math}.
181:
182: \subsection{Error Estimation}
183: Assuming the reference stars were well selected, the standard deviations of their non-variable differential lightcurves may be used to make an empirical estimate of the total photometric errors for a target of a certain magnitude (BJM01). This approach may be used to estimate both formal and ``informal" errors, such as those from flat-fielding and fringing, which may be difficult to evaluate accurately. The advantage of this strategy is that it models the expected error in a target due to noise alone, which may be difficult to otherwise isolate in a target with intrinsic variability. The photometric errors in the individual reference star lightcurves were calculated by plotting their formal photometric errors from IRAF ($\sigma_{IRAF}$) against the standard deviations of their lightcurves ($\sigma_{rms}$). The free parameters of the first order polynomial fit to this plot ($a$ and $b$) were then used to give the errors in the i$th$ reference star lightcurve ($\delta m_{i}$): \begin{math}\delta m_{i} = a + b \cdot \sigma_{IRAF}\end{math}. The error in the relative magnitude ($\delta m_{rel}$) was then calculated using the magnitude errors in the target $\delta m_{t}$, and the i$th$ reference star, $\delta m_{i}$ (i=1...M), as demonstrated by BJM01:
184:
185: \begin{equation}
186: ( \delta m_{rel})^2 = (\delta m_{t})^2 +( \frac{1}{MF_r})^2 \sum_{i}^{M} F_i^2 (\delta m_{i})^2
187: \end{equation}
188:
189: \subsection{Period Determination and Significance of Variability}
190: Periodograms or power spectra were used to search for periodic variability. The Lomb-Scargle Periodogram (Lomb, 1976; Scargle, 1982) was calculated for the I-band data of TVLM 513 and 2MASS J0036+18. The power spectra or periodograms were searched for significant peaks, which signify periodic variability. When a significant peak was found, the data were phase folded to this period. These phase folded lightcurves were then visually inspected as a final test - the scatter of the lightcurves were found to be lowest when folded to the periods detected in the periodograms, and began to show increased scatter when folded at other periods. The measure of variability amplitude used is $\sigma_{rel}$, the standard deviation of the target lightcurve. However, the significance of variability in a lightcurve is not simply the ratio $\sigma_{rel}$/$\overline{\delta m_{rel}}$, as for a large number of points, statistically significant variability may be detected even if $\sigma_{rel}$ is only slightly larger than $\overline{\delta m_{rel}}$ (see BJM01).
191:
192: %% In a manner similar to \objectname authors can provide links to dataset
193: %% hosted at participating data centers via the \dataset{} command. The
194: %% second curly bracket argument is printed in the text while the first
195: %% parentheses argument serves as the valid data set identifier. Large
196: %% lists of data set are best provided in a table (see Table 3 for an example).
197: %% Valid data set identifiers should be obtained from the data center that
198: %% is currently hosting the data.
199: %%
200: %% Note that AASTeX interprets everything between the curly braces in the
201: %% macro as regular text, so any special characters, e.g. "#" or "_," must be
202: %% preceded by a backslash. Otherwise, you will get a LaTeX error when you
203: %% compile your manuscript. Special characters do not
204: %% need to be escaped in the optional, square-bracket argument.
205:
206:
207: %% In this section, we use the \subsection command to set off
208: %% a subsection. \footnote is used to insert a footnote to the text.
209:
210: %% Observe the use of the LaTeX \label
211: %% command after the \subsection to give a symbolic KEY to the
212: %% subsection for cross-referencing in a \ref command.
213: %% You can use LaTeX's \ref and \label commands to keep track of
214: %% cross-references to sections, equations, tables, and figures.
215: %% That way, if you change the order of any elements, LaTeX will
216: %% automatically renumber them.
217:
218: %% This section also includes several of the displayed math environments
219: %% mentioned in the Author Guide.
220:
221: \section{Results}
222: Low amplitude, quasi-sinusoidal variability was detected in the I-band photometry for both objects, with periods identical to those found at radio wavelengths (P=1.96 hr for TVLM 513, and P=3 hr for 2MASS J0036+18); see Fig 1 of this paper and Fig 2 of H07. These periods were used with radius estimates (Dahn et al., 2002) to calculate rotational velocities of $\sim$ 60 km s$^{-1}$ for TVLM 513 and $\sim$ 37 km s$^{-1}$ for 2MASS J0036+18. The calculated velocities are consistent with $v$ sin $i$ measurements of $\sim$ 60 km s$^{-1}$ for TVLM 513 (Basri, 2001) and 36 $^+_-$ 2.7 km s$^{-1}$ for 2MASS J0036+18 (Zapaterio Osorio, 2006), indicating a high inclination angle, $i$. Based on these results, we attribute the I-band periods to the periods of rotation, with rotation axes perpendicular to the line of sight.
223:
224: The detected rotational modulation in the TVLM 513 I-band data ($\sigma_{rel}$=0.0076, $\overline{\delta m_{rel}}$=0.0054), along with confirmation of strong magnetic fields in the radio data suggests that magnetic spots are the most probable cause of variability. Additionally, this periodic modulation appeared to be sustained over the four nights of the observing campaign, being detected in periodograms of the optical data on all nights between May 18th and 20th (USNO) and in the May 21st data (VATT). There is a high degree of correlation in the lightcurves from both telescopes, despite instrumental differences (see Fig 2).
225:
226: The rotational modulation found for 2MASS J0036+18 is interesting ($\sigma_{rel}$=0.015, $\overline{\delta m_{rel}}$=0.0089), as the amplitude of the modulation apparently changes within the timescale of the observation, a phenomenon which is not reflected in the lightcurves of reference stars or of a field star of similar magnitude (see Fig 2). Just less than three cycles are visible in the 2MASS J0036+18 lightcurve, with the amplitude of the first `peak' most closely matching the third (Fig 2). Due to the short observation, the Lomb Scargle periodogram assumes that this behaviour will repeat ad infinitum, and thus a second peak is produced in the periodogram at a frequency of half the fundamental (Fig 1). As the 3 hr periodicity provides a rotational velocity consistent with $v$ sin $i$ measurements, and there is no physical reason for the 6 hr periodicity, the variation in the peak to peak amplitude is most likely due to some underlying aperiodic variability. If this object is indeed an analogue of TVLM 513 as argued by H06, it must have strong magnetic fields. Therefore, we suggest that magnetic spots are the most likely source of the 3 hr rotational modulation, while rapidly evolving features may cause the apparent change in amplitude of the variability. Such features might include dust clouds or magnetic spots which are changing in size or temperature.
227:
228:
229: %% The equation environment wil produce a numbered display equation.
230:
231:
232:
233: %% The \notetoeditor{TEXT} command allows the author to communicate
234: %% information to the copy editor. This information will appear as a
235: %% footnote on the printed copy for the manuscript style file. Nothing will
236: %% appear on the printed copy if the preprint or
237: %% preprint2 style files are used.
238:
239: %% The eqnarray environment produces multi-line display math. The end of
240: %% each line is marked with a \\. Lines will be numbered unless the \\
241: %% is preceded by a \nonumber command.
242: %% Alignment points are marked by ampersands (&). There should be two
243: %% ampersands (&) per line.
244:
245:
246:
247: %% Putting eqnarrays or equations inside the mathletters environment groups
248: %% the enclosed equations by letter. For instance, the eqnarray below, instead
249: %% of being numbered, say, (4) and (5), would be numbered (4a) and (4b).
250: %% LaTeX the paper and look at the output to see the results.
251:
252:
253:
254: %% This section contains more display math examples, including unnumbered
255: %% equations (displaymath environment). The last paragraph includes some
256: %% examples of in-line math featuring a couple of the AASTeX symbol macros.
257:
258: \section{Discussion \& Conclusions}
259: We have detected periodic modulation in the I-band photometry of TVLM 513 and 2MASS J0036+18, which we have determined to be rotational using radius estimates and $v$ sin $i$ measurements. Radio observations have provided confirmation of strong magnetic fields for TVLM 513 and there is evidence for their existence on 2MASS J0036+18. Based on the optical and radio results, we argue that magnetic spots are the cause of the variability of both these objects.
260:
261: In the case of 2MASS J0036+18 (L3.5), this is contrary to expectations that dust is the cause of all L dwarf variability. It has been suggested that the fractional ionization of the photospheric and atmospheric plasma of ultracool dwarfs is too low to sustain magnetic spot structures (G02, Mohanty et al., 2002). However, if the magnetic field is large-scale, as has been confirmed to be the case for TVLM 513 (H07), it may produce magnetic spots. A plausible explanation for the 2MASS J0036+18 result is that the amplitude of the underlying rotational signal due to magnetic spots is itself modulated by evolving features such as dust clouds. However, long-timescale observations are necessary to rule out random noise effects and to investigate the possible influence of evolving features.
262:
263: It should be noted that our observations were designed to be sensitive to the rotational modulation of rapid rotators, with high temporal resolution photometry obtained for both objects. This strategy was found to be successful, and our next challenge is to monitor 2MASS J0036+18 to investigate timescales for possible evolving features by isolating their effects from the underlying rotational modulation.
264:
265: %% The displaymath environment will produce the same sort of equation as
266: %% the equation environment, except that the equation will not be numbered
267: %% by LaTeX.
268:
269:
270: %% If you wish to include an acknowledgments section in your paper,
271: %% separate it off from the body of the text using the \acknowledgments
272: %% command.
273:
274: %% Included in this acknowledgments section are examples of the
275: %% AASTeX hypertext markup commands. Use \url without the optional [HREF]
276: %% argument when you want to print the url directly in the text. Otherwise,
277: %% use either \url or \anchor, with the HREF as the first argument and the
278: %% text to be printed in the second.
279:
280: \acknowledgments
281: This work is supported by Science Foundation Ireland under its Research Frontiers Programme, the Higher Education Authority's Programme for Research in Third Level Institutions, and the Irish Research Council for Science, Engineering and Technology. Armagh Observatory is grant-aided by the N. Ireland Dept. of Culture, Arts \& Leisure. We also thank Hugh Harris and our referee for their suggestions, which have greatly improved the manuscript.
282:
283: %% To help institutions obtain information on the effectiveness of their
284: %% telescopes, the AAS Journals has created a group of keywords for telescope
285: %% facilities. A common set of keywords will make these types of searches
286: %% significantly easier and more accurate. In addition, they will also be
287: %% useful in linking papers together which utilize the same telescopes
288: %% within the framework of the National Virtual Observatory.
289: %% See the AASTeX Web site at http://www.journals.uchicago.edu/AAS/AASTeX
290: %% for information on obtaining the facility keywords.
291:
292: %% After the acknowledgments section, use the following syntax and the
293: %% \facility{} macro to list the keywords of facilities used in the research
294: %% for the paper. Each keyword will be checked against the master list during
295: %% copy editing. Individual instruments or configurations can be provided
296: %% in parentheses, after the keyword, but they will not be verified.
297:
298: %{\it Facilities:} \facility{Nickel}, \facility{HST (STIS)}, \facility{CXO (ASIS)}.
299:
300: %% Appendix material should be preceded with a single \appendix command.
301: %% There should be a \section command for each appendix. Mark appendix
302: %% subsections with the same markup you use in the main body of the paper.
303:
304: %% Each Appendix (indicated with \section) will be lettered A, B, C, etc.
305: %% The equation counter will reset when it encounters the \appendix
306: %% command and will number appendix equations (A1), (A2), etc.
307:
308: %\appendix
309:
310: %\section{Appendix material}
311:
312:
313:
314: %% The reference list follows the main body and any appendices.
315: %% Use LaTeX's thebibliography environment to mark up your reference list.
316: %% Note \begin{thebibliography} is followed by an empty set of
317: %% curly braces. If you forget this, LaTeX will generate the error
318: %% "Perhaps a missing \item?".
319: %%
320: %% thebibliography produces citations in the text using \bibitem-\cite
321: %% cross-referencing. Each reference is preceded by a
322: %% \bibitem command that defines in curly braces the KEY that corresponds
323: %% to the KEY in the \cite commands (see the first section above).
324: %% Make sure that you provide a unique KEY for every \bibitem or else the
325: %% paper will not LaTeX. The square brackets should contain
326: %% the citation text that LaTeX will insert in
327: %% place of the \cite commands.
328:
329: %% We have used macros to produce journal name abbreviations.
330: %% AASTeX provides a number of these for the more frequently-cited journals.
331: %% See the Author Guide for a list of them.
332:
333: %% Note that the style of the \bibitem labels (in []) is slightly
334: %% different from previous examples. The natbib system solves a host
335: %% of citation expression problems, but it is necessary to clearly
336: %% delimit the year from the author name used in the citation.
337: %% See the natbib documentation for more details and options.
338:
339: \begin{thebibliography}{}
340: \bibitem[Allard(2001)]{al01} Allard, F., Hauschildt, P. H., Alexander, D. R., Tamanai, A., \& Schweitzer, A. 2001, \apj, 556, 357
341: \bibitem[Basri(2001)]{bas01} Basri, G. 2001, ASP Conf. Ser. 223, Cool Stars, Stellar Systems and the Sun: 11th
342: Cambridge Workshop, ed. R. J. Garcia Lopez, R. Rebolo, \& M. R. Zapaterio Osorio (San Francisco: ASP), 261
343: \bibitem[Bailer-Jones and Mundt]{bjm01} Bailer-Jones, C. A. L., \& Mundt, R. 2001, \aap, 367, 218 (BJM01)
344: \bibitem[Berger(2005)]{ber05} Berger, E., et al. 2005, \apj, 627, 960 (B05)
345: \bibitem[Dahn(2002)]{dahn02} Dahn, C. C, Harris, H. C., Vrba, F. J., Guetter, H. H., Canzian, B., Henden, A. A., Levine, S. E., Luginbuhl, C. B., Monet, A. K. B., Monet, D. G., Pier, J. R., Stone, R. C., Walker, R. L., Burgasser, A. J., Gizis, J. E., Kirkpatrick, J. D., Liebert, J., Reid, I. N., 2002, \aj, 124, 1170
346: \bibitem[Gelino(2002)]{gel02} Gelino, C. R., Marley, M. S., Holtzman, J. A., Ackerman, A. S., \& Lodders, K. 2002, \apj, 577, 433 (G02)
347: \bibitem[Hallinan(2006)]{hal06}Hallinan, G., Antonova, A, Doyle, J. G., Bourke, S., Brisken, W. F. \& Golden, A. 2006, \apj, 653, 690 (H06)
348: \bibitem[Hallinan(2007)]{hal07}Hallinan, G., Bourke, S., Lane, C., Antonova, A., Zavala, R.T., Brisken, W.F., Boyle, R.P., Vrba, F.J., Doyle, J.G. \& A. Golden, 2007, ApJ, L663, 25 (H07)
349: \bibitem[Kirkpatrick(2000)]{kirk00}Kirkpatrick, J. D., Reid, I. N., Liebert, J., Gizis, J. E., Burgasser, A. J., Monet, D. G., Dahn, C. C.; Nelson, B., Williams, R. J., 2000, \aj,120, 447
350: \bibitem[Koen(2006)]{koen06} Koen, C., 2006, \mnras, 367, 1735
351: \bibitem[Lomb(1976)]{lomb76} Lomb, N. R. 1976, \apss, 39, 447
352: \bibitem[Mart\'{i}n(2001)]{martin01}Mart\'{i}n, E. L., Zapatero Osorio, M. R., \& Lehto, H. J., 2001, \apj, 557, 822
353: \bibitem[Mohanty(2002)]{moh02} Mohanty, S., Basri, G., Shu, F., Allard, F., \& Chabrier, G. 2002, \apj, 571, 469
354: \bibitem[Reiners(2007)]{reiners07} Reiners, A., \& Basri, G. 2007, \apj, 656, 1121
355: \bibitem[Roberts(1987)]{roberts87}Roberts, D. H., Lehar, J., \& Dreher, J. W. 1987, \aj, 93, 968
356: \bibitem[Rockenfeller(2002)]{rock06} Rockenfeller, B, Bailer-Jones, C.A.L, and Mundt, R. 2006, \aap, 448, 1111
357: \bibitem[Scargle(1982)]{scar82} Scargle, J. D., 1982, \apj, 263, 835
358: \bibitem[Zapatero Osorio(2006)]{zap06} Zapatero Osorio, M. R., Mart\'{i}n, E. L., Bouy, H., Tata, R., Deshpande, R. \& Wainscoat, R. 2006, \apj, 647, 1405
359:
360: \end{thebibliography}
361:
362:
363: %\clearpage
364:
365: %% Use the figure environment and \plotone or \plottwo to include
366: %% figures and captions in your electronic submission.
367: %% To embed the sample graphics in
368: %% the file, uncomment the \plotone, \plottwo, and
369: %% \includegraphics commands
370: %%
371: %% If you need a layout that cannot be achieved with \plotone or
372: %% \plottwo, you can invoke the graphicx package directly with the
373: %% \includegraphics command or use \plotfiddle. For more information,
374: %% please see the tutorial on "Using Electronic Art with AASTeX" in the
375: %% documentation section at the AASTeX Web site,
376: %% http://www.journals.uchicago.edu/AAS/AASTeX.
377: %%
378: %% The examples below also include sample markup for submission of
379: %% supplemental electronic materials. As always, be sure to check
380: %% the instructions to authors for the journal you are submitting to
381: %% for specific submissions guidelines as they vary from
382: %% journal to journal.
383:
384: %% This example uses \plotone to include an EPS file scaled to
385: %% 80% of its natural size with \epsscale. Its caption
386: %% has been written to indicate that additional figure parts will be
387: %% available in the electronic journal.
388:
389: %\begin{figure}
390: %\epsscale{.80}
391: %\plotone{f1.eps}
392: %\caption{Derived spectra for 3C138 \citep[see][]{heiles03}. Plots for all sources are available
393: %in the electronic edition of {\it The Astrophysical Journal}.\label{fig1}}
394: %\end{figure}
395:
396: %\clearpage
397:
398: %% Here we use \plottwo to present two versions of the same figure,
399: %% one in black and white for print the other in RGB color
400: %% for online presentation. Note that the caption indicates
401: %% that a color version of the figure will be available online.
402: %%
403:
404: %\begin{figure}
405: %\plottwo{f2.eps}{f2_color.eps}
406: %\caption{A panel taken from Figure 2 of \citet{rudnick03}.
407: %See the electronic edition of the Journal for a color version
408: %of this figure.\label{fig2}}
409: %\end{figure}
410:
411: %% This figure uses \includegraphics to scale and rotate the still frame
412: %% for an mpeg animation.
413:
414: %% If you are not including electonic art with your submission, you may
415: %% mark up your captions using the \figcaption command. See the
416: %% User Guide for details.
417: %%
418: %% No more than seven \figcaption commands are allowed per page,
419: %% so if you have more than seven captions, insert a \clearpage
420: %% after every seventh one.
421:
422: %% Tables should be submitted one per page, so put a \clearpage before
423: %% each one.
424:
425: %% Two options are available to the author for producing tables: the
426: %% deluxetable environment provided by the AASTeX package or the LaTeX
427: %% table environment. Use of deluxetable is preferred.
428: %%
429:
430: %% Three table samples follow, two marked up in the deluxetable environment,
431: %% one marked up as a LaTeX table.
432:
433: %% In this first example, note that the \tabletypesize{}
434: %% command has been used to reduce the font size of the table.
435: %% We also use the \rotate command to rotate the table to
436: %% landscape orientation since it is very wide even at the
437: %% reduced font size.
438: %%
439: %% Note also that the \label command needs to be placed
440: %% inside the \tablecaption.
441:
442: %% This table also includes a table comment indicating that the full
443: %% version will be available in machine-readable format in the electronic
444: %% edition.
445:
446: %\clearpage
447:
448: %\begin{deluxetable}{ccrrrrrrrrcrl}
449: %\tabletypesize{\scriptsize}
450: %\rotate
451: %\tablecaption{Sample table taken from \citet{treu03}\label{tbl-1}}
452: %\tablewidth{0pt}
453: %\tablehead{
454: %\colhead{POS} & \colhead{chip} & \colhead{ID} & \colhead{X} & \colhead{Y} &
455: %\colhead{RA} & \colhead{DEC} & \colhead{IAU$\pm$ $\delta$ IAU} &
456: %\colhead{IAP1$\pm$ $\delta$ IAP1} & \colhead{IAP2 $\pm$ $\delta$ IAP2} &
457: %\colhead{star} & \colhead{E} & \colhead{Comment}
458: %}
459: %% Text for table notes should follow after the \enddata but before
460: %% the \end{deluxetable}. Make sure there is at least one \tablenotemark
461: %% in the table for each \tablenotetext.
462: %\tablecomments{Table \ref{tbl-1} is published in its entirety in the
463: %electronic edition of the {\it Astrophysical Journal}. A portion is
464: %shown here for guidance regarding its form and content.}
465: %\tablenotetext{a}{Sample footnote for table~\ref{tbl-1} that was generated
466: %with the deluxetable environment}
467: %\tablenotetext{b}{Another sample footnote for table~\ref{tbl-1}}
468: %\end{deluxetable}
469:
470: %% If you use the table environment, please indicate horizontal rules using
471: %% \tableline, not \hline.
472: %% Do not put multiple tabular environments within a single table.
473: %% The optional \label should appear inside the \caption command.
474:
475: %\clearpage
476:
477: %% If the table is more than one page long, the width of the table can vary
478: %% from page to page when the default \tablewidth is used, as below. The
479: %% individual table widths for each page will be written to the log file; a
480: %% maximum tablewidth for the table can be computed from these values.
481: %% The \tablewidth argument can then be reset and the file reprocessed, so
482: %% that the table is of uniform width throughout. Try getting the widths
483: %% from the log file and changing the \tablewidth parameter to see how
484: %% adjusting this value affects table formatting.
485:
486: %% The \dataset{} macro has also been applied to a few of the objects to
487: %% show how many observations can be tagged in a table.
488:
489: %% You can append references to a table using the \tablerefs command.
490:
491:
492:
493: %% Tables may also be prepared as separate files. See the accompanying
494: %% sample file table.tex for an example of an external table file.
495: %% To include an external file in your main document, use the \input
496: %% command. Uncomment the line below to include table.tex in this
497: %% sample file. (Note that you will need to comment out the \documentclass,
498: %% \begin{document}, and \end{document} commands from table.tex if you want
499: %% to include it in this document.)
500:
501: %% \input{table}
502:
503: %% The following command ends your manuscript. LaTeX will ignore any text
504: %% that appears after it.
505:
506: \clearpage
507:
508: \begin{figure}
509: \plotone{f1.eps}
510: \caption{Lomb-Scargle Periodograms of raw radio and optical data. I-band photometry of 2MASS J0036+18 and a field star of similar magnitude, obtained on USNO 1.55m, Sept 19th, 2006 and 4.9 GHz total intensity radio emission, B05.}
511: \end{figure}
512:
513: \begin{figure}
514: \plotone{f2.eps}
515: \caption{I-band lightcurves of 2MASS J0036+18 and TVLM 513 (a) USNO 1.55m raw 2MASS J0036+18 lightcurve, September 19th UT, 2006, measured using 9 reference stars. (b) USNO 1.55m raw lightcurve of a field star of similar magnitude to 2MASS J0036+18, using same reference stars. (c) Binned, phase-folded lightcurves of TVLM 513 data, obtained at VATT 1.8m, May 21 2006 (black) and USNO 1m, May 18 2006 (grey), both measured using two reference stars. The error bars are taken as $\overline{\delta m_{rel}}$, the average expected error in the lightcurves.}
516: \end{figure}
517:
518: \end{document}
519:
520: %%
521: %% End of file `sample.tex'.
522: