1: %%
2:
3: %% Beginning of file 'sample.tex'
4:
5: %%
6:
7: %% Modified 2005 December 5
8:
9: %%
10:
11: %% This is a sample manuscript marked up using the
12:
13: %% AASTeX v5.x LaTeX 2e macros.
14:
15:
16:
17: %% The first piece of markup in an AASTeX v5.x document
18:
19: %% is the \documentclass command. LaTeX will ignore
20:
21: %% any data that comes before this command.
22:
23:
24: %% The command below calls the preprint style
25:
26: %% which will produce a one-column, single-spaced document.
27:
28: %% Examples of commands for other substyles follow. Use
29:
30: %% whichever is most appropriate for your purposes.
31:
32: %%
33:
34: \documentclass[12pt,preprint]{aastex}
35: %\documentclass[apjl]{emulateapj}
36:
37: %% manuscript produces a one-column, double-spaced document:
38:
39:
40: %\documentclass[manuscript]{aastex}
41: %\documentclass[apjl]{emulateapj}
42: %% preprint2 produces a double-column, single-spaced document:
43:
44:
45: %% \documentclass[preprint2]{aastex}
46:
47:
48: %% Sometimes a paper's abstract is too long to fit on the
49:
50: %% title page in preprint2 mode. When that is the case,
51:
52: %% use the longabstract style option.
53:
54:
55: %% \documentclass[preprint2,longabstract]{aastex}
56:
57:
58: %% If you want to create your own macros, you can do so
59:
60: %% using \newcommand. Your macros should appear before
61:
62: %% the \begin{document} command.
63:
64: %%
65:
66: %% If you are submitting to a journal that translates manuscripts
67:
68: %% into SGML, you need to follow certain guidelines when preparing
69:
70: %% your macros. See the AASTeX v5.x Author Guide
71:
72: %% for information.
73:
74:
75: %\newcommand{\vdag}{(v)^\dagger}
76:
77: %\newcommand{\myemail}{skywalker@galaxy.far.far.away}
78:
79:
80: %% You can insert a short comment on the title page using the command below.
81:
82:
83: %\slugcomment{DRAFT: Aug 14, 07}
84:
85: %% If you wish, you may supply running head information, although
86:
87: %% this information may be modified by the editorial offices.
88:
89: %% The left head contains a list of authors,
90:
91: %% usually a maximum of three (otherwise use et al.). The right
92:
93: %% head is a modified title of up to roughly 44 characters.
94:
95: %% Running heads will not print in the manuscript style.
96:
97:
98: \shorttitle{Acetylene toward Cepheus A East}
99: \shortauthors{Sonnentrucker et al.}
100:
101: %% This is the end of the preamble. Indicate the beginning of the
102:
103: %% paper itself with \begin{document}.
104:
105:
106: \begin{document}
107:
108: %% LaTeX will automatically break titles if they run longer than
109:
110: %% one line. However, you may use \\ to force a line break if
111:
112: %% you desire.
113:
114:
115: \title{Detection of Acetylene toward Cepheus A East with {\it Spitzer}}
116:
117: %% Use \author, \affil, and the \and command to format
118:
119: %% author and affiliation information.
120:
121: %% Note that \email has replaced the old \authoremail command
122:
123: %% from AASTeX v4.0. You can use \email to mark an email address
124:
125: %% anywhere in the paper, not just in the front matter.
126:
127: %% As in the title, use \\ to force line breaks.
128:
129:
130: \author{P. Sonnentrucker\altaffilmark{2}, E. Gonz\'alez-Alfonso\altaffilmark{3} and D. A. Neufeld\altaffilmark{2}}
131: %\affil{Astronomy Department, University of California,
132:
133: % Berkeley, CA 94720}
134:
135:
136: %\author{C. D. Biemesderfer\altaffilmark{4,5}}
137:
138: %\affil{National Optical Astronomy Observatories, Tucson, AZ 85719}
139:
140: %\email{aastex-help@aas.org}
141:
142:
143: %\and
144:
145:
146: %\author{R. J. Hanisch\altaffilmark{5}}
147:
148: %\affil{Space Telescope Science Institute, Baltimore, MD 21218}
149:
150:
151:
152: %% Notice that each of these authors has alternate affiliations, which
153:
154: %% are identified by the \altaffilmark after each name. Specify alternate
155:
156: %% affiliation information with \altaffiltext, with one command per each
157:
158: %% affiliation.
159:
160:
161: \altaffiltext{1}{Based on observations with the {\it Spitzer Space Telescope}.}
162: \altaffiltext{2}{Department of Physics and Astronomy, Johns Hopkins University, 3400 North Charles Street, Baltimore, MD 21218.}
163: \altaffiltext{3}{Universidad de Alcal\'a de Henares, Departamento de F\'isica, Campus Universitario, E-28871 Alcal\'a de Henares, Madrid, Spain.}
164: %\altaffiltext{4}{Visiting Programmer, Space Telescope Science Institute}
165:
166: %\altaffiltext{5}{Patron, Alonso's Bar and Grill}
167:
168:
169:
170: %% Mark off your abstract in the ``abstract'' environment. In the manuscript
171:
172: %% style, abstract will output a Received/Accepted line after the
173:
174: %% title and affiliation information. No date will appear since the author
175:
176: %% does not have this information. The dates will be filled in by the
177:
178: %% editorial office after submission.
179:
180:
181: \begin{abstract}
182: The first map of interstellar acetylene (C$_2$H$_2$) has been
183: obtained with the infrared spectrograph onboard the {\it Spitzer Space Telescope}. A spectral line map of the $\nu_5$ vibration-rotation band at 13.7 $\mu$m carried out toward the star-forming region Cepheus A East,
184: shows that the C$_2$H$_2$ emission peaks in a few localized clumps where
185: gas-phase CO$_2$ emission was previously detected with {\it Spitzer}. The
186: distribution of excitation temperatures derived from fits to the C$_2$H$_2$
187: line profiles ranges from 50 to 200 K, a range consistent
188: with that derived for gaseous CO$_2$ suggesting that both molecules probe
189: the same warm gas component. The C$_2$H$_2$ molecules are
190: excited via radiative pumping by 13.7 $\mu$m continuum photons emanating from
191: the HW2 protostellar region. We derive column densities ranging from a few
192: $\times$ 10$^{13}$ to $\sim$ 7 $\times$ 10$^{14}$ cm$^{-2}$, corresponding
193: to C$_2$H$_2$ abundances of 1 $\times$ 10$^{-9}$ to 4 $\times$
194: 10$^{-8}$ with respect to H$_2$. The spatial distribution of the C$_2$H$_2$ emission along with a roughly constant $N$(C$_2$H$_2$)/$N$(CO$_2$) strongly suggest an association with shock activity, most likely the result of the sputtering of acetylene in icy grain mantles.
195: \end{abstract}
196:
197: %% Keywords should appear after the \end{abstract} command. The uncommented
198:
199: %% example has been keyed in ApJ style. See the instructions to authors
200:
201: %% for the journal to which you are submitting your paper to determine
202:
203: %% what keyword punctuation is appropriate.
204:
205:
206: \keywords{ISM: jets and outflows --- ISM: molecules--- ISM: individual (Cepheus A East)}
207:
208: %% From the front matter, we move on to the body of the paper.
209:
210: %% In the first two sections, notice the use of the natbib \citep
211:
212: %% and \citet commands to identify citations. The citations are
213:
214: %% tied to the reference list via symbolic KEYs. The KEY corresponds
215:
216: %% to the KEY in the \bibitem in the reference list below. We have
217:
218: %% chosen the first three characters of the first author's name plus
219:
220: %% the last two numeral of the year of publication as our KEY for
221:
222: %% each reference.
223:
224:
225:
226: %% Authors who wish to have the most important objects in their paper
227:
228: %% linked in the electronic edition to a data center may do so by tagging
229:
230: %% their objects with \objectname{} or \object{}. Each macro takes the
231:
232: %% object name as its required argument. The optional, square-bracket
233:
234: %% argument should be used in cases where the data center identification
235:
236: %% differs from what is to be printed in the paper. The text appearing
237:
238: %% in curly braces is what will appear in print in the published paper.
239:
240: %% If the object name is recognized by the data centers, it will be linked
241:
242: %% in the electronic edition to the object data available at the data centers
243:
244: %%
245:
246: %% Note that for sources with brackets in their names, e.g. [WEG2004] 14h-090,
247:
248: %% the brackets must be escaped with backslashes when used in the first
249:
250: %% square-bracket argument, for instance, \object[\[WEG2004\] 14h-090]{90}).
251:
252: %% Otherwise, LaTeX will issue an error.
253:
254:
255: \section{Introduction}
256:
257: Acetylene constitutes a key ingredient in the production of large complex hydrocarbon molecules in the dense interstellar medium (Herbst 1995). Because acetylene has no permanent dipole moment, it lacks a rotational spectrum that could be observed at radio wavelengths; observations of interstellar acetylene have therefore been limited to mid-infrared studies of rovibrational bands, carried out from ground-(e.g., Evans, Lacy \& Carr 1991; Carr et al. 1995) and space-based (e.g., Lahuis \& van Dishoeck 2000; Boonman et al. 2003; Lahuis et al. 2007) observatories. Acetylene has been detected in the gas-phase - either in absorption (e.g., Carr et al. 1995; Lahuis \& van Dishoeck 2000) or in emission (e.g. Boonman et al. 2003, this paper) - mostly toward young stellar objects. C$_2$H$_2$ can be used as a tracer of warm (100 K to 1000 K) molecular gas along often complicated sightlines. C$_2$H$_2$ abundance estimates, which were sometimes a few orders of magnitude higher than the predictions of cold gas-phase steady-state chemical models, have led to a better understanding of the role that warm gas-phase chemistry (e.g., Doty et al. 2002; Rodgers \& Charnley 2001) and/or grain mantle processing (e.g., Ruffle \& Herbst 2000) can play in star-forming regions, both locally and in extra-galactic objects (Lahuis et al. 2007).
258:
259: In this Letter, we present the first detection of the $\nu_5$ band of acetylene (C$_2$H$_2$) at 13.7 $\mu$m toward the star forming region Cepheus A East using the Infrared Spectrograph (IRS) onboard the {\it Spitzer Space Telescope}. This is the first map of C$_2$H$_2$ obtained toward any interstellar gas cloud. Section 2 describes the observations and data analysis. Sections 3 and 4 compare the spatial distribution of C$_2$H$_2$ to those of gaseous CO$_2$ and H$_2$ $S$(2), and discuss the C$_2$H$_2$-emitting gas in the context of shock chemistry and local outflow activity. The presence of C$_2$H$_2$ on interstellar dust grains will also be discussed in the context of cometary ices composition.
260:
261: \section{Observations and data analysis}
262:
263: Spectral maps were obtained with the IRS instrument onboard {\it Spitzer} as
264: part of the Guaranteed Time Observer Program 113. 1$'$$\times$1$'$ square
265: fields were observed with the short-low (SL), short-high (SH), and long-high
266: (LH) modules, providing wavelength coverage from 5.2 to 25
267: $\mu$m. We obtained continuous spatial sampling by stepping the slit
268: perpendicular and parallel to its long axis in steps of one-half its width
269: and 4/5 its length, respectively. The data were processed with version 12
270: of the pipeline. We used the Spectroscopy Modeling Analysis and Reduction
271: Tool (SMART, Higdon et al. 2004), along with locally developed routines
272: (Neufeld et al. 2006), to extract wavelength- and flux-calibrated spectra and to
273: generate spectral line intensity maps.
274:
275: To estimate the uncertainties in the C$_2$H$_2$ line intensities ($\nu_5$ band at 13.7 $\mu$m),
276: we first calculated the standard deviation ($\sigma$) around our best fit
277: to the local continuum for each point in the map. We then shifted the
278: best-fit continuum by $\pm$1 $\sigma$ and generated the corresponding
279: new estimates of the line intensities. The difference between the best-fit
280: line intensities and the intensities obtained by shifting the best-fit
281: continuum model constitutes our $\pm$1 $\sigma$ errors. While extinction due to the long wavelength wing of the silicate feature (9.7 $\mu$m) certainly occurs, corrections to the C$_2$H$_2$ line intensities were not applied. As we will see below, C$_2$H$_2$ arises in a warm component located mostly in front of the cold quiescent gas traced by the silicates (Sonnentrucker et al. 2007, ApJ in press) making a direct estimate of the fraction of dust located in this warm component nearly impossible. Since our study also indicates that the silicates exhibit a homogeneous distribution over the spatial extent of the gaseous C$_2$H$_2$ emission, we are confident that the C$_2$H$_2$ intensity variations we see are not predominantly due to extinction effects.
282:
283:
284:
285:
286: %% In a manner similar to \objectname authors can provide links to dataset
287:
288: %% hosted at participating data centers via the \dataset{} command. The
289:
290: %% second curly bracket argument is printed in the text while the first
291:
292: %% parentheses argument serves as the valid data set identifier. Large
293:
294: %% lists of data set are best provided in a table (see Table 3 for an example).
295:
296: %% Valid data set identifiers should be obtained from the data center that
297:
298: %% is currently hosting the data.
299:
300: %%
301:
302: %% Note that AASTeX interprets everything between the curly braces in the
303:
304: %% macro as regular text, so any special characters, e.g. "#" or "_," must be
305:
306: %% preceded by a backslash. Otherwise, you will get a LaTeX error when you
307:
308: %% compile your manuscript. Special characters do not
309:
310: %% need to be escaped in the optional, square-bracket argument.
311:
312:
313:
314:
315: %% In this section, we use the \subsection command to set off
316:
317: %% a subsection. \footnote is used to insert a footnote to the text.
318:
319:
320: %% Observe the use of the LaTeX \label
321:
322: %% command after the \subsection to give a symbolic KEY to the
323:
324: %% subsection for cross-referencing in a \ref command.
325:
326: %% You can use LaTeX's \ref and \label commands to keep track of
327:
328: %% cross-references to sections, equations, tables, and figures.
329:
330: %% That way, if you change the order of any elements, LaTeX will
331:
332: %% automatically renumber them.
333:
334:
335: %% This section also includes several of the displayed math environments
336:
337: %% mentioned in the Author Guide.
338:
339:
340: \section{Results}
341:
342: Figure 1 ({\it upper}) shows a summed IRS spectrum in the wavelength range containing acetylene at the spatial location corresponding to one peak in the C$_2$H$_2$ line emission intensity map (HW5/6 in Fig.~2). Note that frequent order mismatches around 14 $\mu$m preclude any reliable detection of the HCN $\nu_2$ band at 14.05 $\mu$m with our data. The striking similarities between the C$_2$H$_2$ maps presented here (Fig.~2) and the gaseous CO$_2$ maps we found previously (Sonnentrucker et al. 2006) strongly suggest that C$_2$H$_2$ arises in the same warm postshock gas component exhibiting gaseous CO$_2$. Because the C$_2$H$_2$ emission lines are weaker by a factor $\sim$10 than those of CO$_2$, we first searched for the spatial positions where C$_2$H$_2$ was detected at a $>$1.5 $\sigma$ level. 38 such individual spatial positions fulfilled this criterion over the mapped region shown in Fig.~2. These are the spectra that we will consider when comparing the C$_2$H$_2$ distribution with that of gas-phase CO$_2$ and H$_2$ $S$(2), a tracer of shock activity (see Fig.~3).
343:
344: We constrained the gas temperature in the selected C$_2$H$_2$-emitting region, by comparing synthetic profiles of the $\nu_5$ acetylene band for temperatures ranging from 50 to 900 K with the observed C$_2$H$_2$ $Q$-branch (13.71 $\mu$m) profile. We find that temperatures between 50 and 200 K best fit the 38 selected C$_2$H$_2$ line profiles (Fig.~1, {\it lower}). Note that significantly higher temperatures, such as those found by Lahuis \& van Dishoeck (2000) toward other massive young stellar objects (300-1000 K), are ruled out in Cepheus A East. Most importantly, our moderate 50-200 K range coincides with the temperature range found for gaseous CO$_2$ in that same region (Sonnentrucker et al. 2006) arguing in favor of a common spatial origin for the two species.
345:
346: To estimate the column density associated with the C$_2$H$_2$ emission, the dominant excitation mechanism needs to be identified. Accurate collisional rates for vibrational excitation of acetylene are not available to our knowledge. If the collisional rates for C$_2$H$_2$ vibrational excitation were similar to those of CO$_2$ (Boonman et al. 2003), densities higher than $10^8$ cm$^{-3}$ would be required to account for the observed emission. Such a high density would give rise to strong high-lying H$_2$O rotational lines that are, however, not detected (e.g., van den Ancker et al. 2000). Additionally, considering the low temperature in the C$_2$H$_2$-emitting gas component relative to the energy of the $\nu_5=1$ state ($E/k\approx1050$ K), as well as the rather low local hydrogen density inferred over this region ($n_{\rm{H}}$$\sim$ few $\times$ 10$^{3}$ to a few $\times$ 10$^{7}$ cm$^{-3}$; Codella et al. 2005), it is quite unlikely that collisions are the dominant excitation mechanism. Radiative pumping by 13.7 $\mu$m continuum photons produced by warm dust local to C$_2$H$_2$ is also unlikely to produce the observed emission, since we previously determined that the radiation field in this region is dominated by dust close to the HW2 protostellar region (Sonnentrucker et al. 2006). Therefore, we conclude that radiative pumping by 13.7 continuum photons emanating from the HW2 protostellar region seems the most likely excitation mechanism for the observed acetylene molecules, as we also found for CO$_2$ (Sonnentrucker et al. 2006).
347:
348: We computed the C$_2$H$_2$ column densities over the mapped region, following the prescription described in Sonnentrucker et al. (2006). Under these assumptions, the derived $N$(C$_2$H$_2$) values are proportional to the acetylene intensities and to the square of the angular separation from the exciting source, HW2 (e.g., Gonz\'alez-Alfonso et al. 2002). Figure 2 displays the intensity map ({\it upper}) and the derived column density map ({\it lower}) for C$_2$H$_2$ toward Cepheus A East. The gray contours show the distribution of NH$_3$ (1,1) a tracer of cold quiescent molecular gas (Torrelles et al. 1993) toward the region fully sampled by {\it Spitzer}. Like gas-phase CO$_2$, the $Q$-branch of gaseous C$_2$H$_2$ mainly traces the walls of the cavity carved by the {\it northeast} component of the outflow originating at HW2 (e.g., G\'omez et al. 1999), an outflow that is apparently responsible for the disruption of the quiescent clouds as seen in the NH$_3$ distribution (e.g., Torrelles et al. 1993; Goetz et al. 1998; van den Ancker 2000). Intensity maxima for C$_2$H$_2$ are detected close to the HW6 radio continuum source, at the NE bridge that joins the Cep A-2 and Cep A-3 cloud cores (Torrelles et al. 1993), and along the western surface of the Cep A-3 cloud. Weaker emission is also found further from the NE bridge. The similarities in both the temperature and the spatial distribution of the C$_2$H$_2$ and CO$_2$ emitting gas add weight to the conjecture that both species arise from the same warm shocked component.
349:
350: We finally searched for correlations between the acetylene measurements and those obtained for gas-phase CO$_2$ and H$_2$ $S$(2), a tracer of shock activity, for those 38 positions where C$_2$H$_2$ was detected at a $>$1.5$\sigma$ level. Figure 3 compares the C$_2$H$_2$ intensity with that of gaseous CO$_2$ ({\it upper}), as well as the C$_2$H$_2$ column density with the CO$_2$ column density ({\it middle}) and the H$_2$ $S$(2) intensity ({\it lower}). In all cases, the good correlation found between acetylene, gaseous CO$_2$ and H$_2$ $S$(2) indicates that C$_2$H$_2$ does indeed arise in the warm shocked component also containing gaseous CO$_2$.
351:
352:
353: \section{Discussion}
354:
355: Acetylene was previously observed toward low-to-high mass star-forming regions either in absorption (e.g., Lahuis \& van Dishoeck 2000) or in emission (e.g., Boonman et al. 2003) using the {\it Infrared Space Observatory} ({\it ISO}). Excitation temperatures ranging from $\sim$ 10 to 900 K and abundances with respect to H$_2$ ranging from a few $\times$ 10$^{-8}$ to a few $\times$ 10$^{-7}$ were derived. Steady-state models of gas-phase chemistry in cold (10-50K) dense (10$^3$-10$^5$ cm$^{-3}$) molecular clouds predict abundances for acetylene between a few $\times$ 10$^{-10}$ and 1$\times$ 10$^{-8}$ with respect to H$_2$ depending on the role that neutral-neutral destruction reactions may play (Bettens, Lee \& Herbst 1995; Lee et al. 1996). Similar abundances are predicted by models of gas-grain chemistry in quiescent clouds with the highest values obtained only after 10$^6$ years (Ruffle \& Herbst 2000). While such models could account for the observed abundances in the cold gas, they were unable to reproduce the enhancements observed toward much warmer gas components in those objects. Mechanisms such as C$_2$H$_2$ ice sublimation from grain mantles and/or C$_2$H$_2$ enhancements via warm gas-phase chemistry were then invoked (e.g., Carr et al. 1995; Doty et al. 2002; Boonman et al. 2003).
356:
357: For the NE outflow region in Cepheus A East, we derive C$_2$H$_2$/H$_2$ abundance ratios in the range 1 $\times$ 10$^{-9}$ to 4 $\times$ 10$^{-8}$, for an assumed H$_2$ column density of 1.5 $\times$ 10$^{22}$ cm$^{-3}$ (G\'omez et al. 1999). These values are averages along the observed sight-lines. The highest abundances are localized around and to the south of, the NE position as well as around the positions of the HW5/6 sources (see Fig.~2). This is precisely where the interaction between the {\it northeast} outflow and the ambient molecular clouds occurs, and it is in these regions that we observe strong H$_2$ $S$(2) emission, a tracer of warm shocked gas. Thus the spatial variation of the C$_2$H$_2$ abundance again strongly suggests an association with shock activity, perhaps as a result of (1) production in the gas phase via high temperature reactions, or (2) grain mantle sputtering.
358:
359: Models for chemistry in hot cores (Rodgers \& Charnley 2001; Doty et al. 2002) indicate that enhanced abundances of C$_2$H$_2$ ($\sim$ few $\times$ 10$^{-8}$) are expected in warm regions with $T \ge$ 200 K. The good correlations between H$_2$ $S$(2), gaseous CO$_2$ and C$_2$H$_2$ indicate that such high temperatures were reached in the warm gas at the passage of the non-dissociative shock. However, the chemical pathways leading to the production of C$_2$H$_2$ are slow, and enhanced abundances only occur after $\sim$ 10$^4$ years, a time scale much greater than that expected for shock heating of the gas ($\sim$ 300 years; e.g. Kaufman \& Neufeld 1996). Hence, enhanced production of C$_2$H$_2$ by high temperature gas-phase chemistry is unlikely to be predominant in the observed region. Thus the correlations shown in Fig.~3 argue in favor of grain mantle sputtering over gas-phase production as the origin of the C$_2$H$_2$ in Cepheus A East. This is the same production mechanism that we favored for gaseous CO$_2$ (Sonnentrucker et al. 2006). While models for the production of C$_2$H$_2$ in shocks are not available to our knowledge, our results further suggest that both C$_2$H$_2$ and CO$_2$ are released into the gas phase under very similar physical conditions.
360:
361: The gaseous $\rm C_2H_2/CO_2$ ratio is roughly constant, with a mean value of 0.08 for all sight-lines where we detected acetylene at the 1.5 $\sigma$ level. If this value reflects the composition of the grain mantle, and given a $N$(CO$_2$)$_{ice}$/$N$(H$_2$O)$_{ice}$ ratio in this source of 0.22 (Sonnentrucker et al. 2007, ApJ in press), then the required $N$(C$_2$H$_2$)$_{ice}$/$N$(H$_2$O)$_{ice}$ ratio is 0.02. This value is at least a factor 4 larger than those derived toward other star-forming regions (0.1-0.5\%, Evans et al. 1991; Lahuis \& van Dishoeck 2000) and those predicted by theoretical models (0.1-0.5\%, Hasegawa \& Herbst 1993; Ruffle \& Herbst 2000), and at least a factor 2 larger than the gaseous C$_2$H$_2$/H$_2$O ratios obtained in observations of cometary comae (0.1-0.9\%, Brooke et al. 1996; Weaver et al. 1999). We speculate that these discrepancies might result from (1) the destruction of CO$_2$ by reaction with atomic hydrogen in shocks faster than $\sim$ 30 km s$^{-1}$ (predicted by Charnley \& Kaufman, 2000) and/or (2) a greater efficiency for sputtering of C$_2$H$_2$ in slow shocks.\footnote{Although both these effects would be strongly dependent upon the shock velocity, the relative constancy of the $\rm C_2H_2/CO_2$ would not necessarily require any fine tuning of the shock velocity. In reality, any sight-line typically samples an ensemble of shocks with a {\it range} of shock velocities, and the constancy of the $\rm C_2H_2/CO_2$ would simply indicate that the admixture of shock velocities varies little from one sight-line to another (e.g. Neufeld et al.\ 2006).} In either case, the gaseous C$_2$H$_2$/CO$_2$ ratios we observed may exceed the solid C$_2$H$_2$/CO$_2$ ratio, and the $N$(C$_2$H$_2$)$_{ice}$/$N$(H$_2$O)$_{ice}$ ratio could be less than 0.02. Unfortunately, direct measurements of acetylene ice are not possible, the weak features expected from solid C$_2$H$_2$ being blended with much stronger features of CO and H$_2$O (Boudin et al. 1998). However, further observations of gaseous C$_2$H$_2$ at a higher signal-to-noise ratio would be very valuable as a probe of any variations in the $\rm C_2H_2/CO_2$ ratio which might provide important clues to the shock physics.
362:
363:
364:
365:
366: %% The equation environment wil produce a numbered display equation.
367:
368:
369:
370:
371:
372: %% The \notetoeditor{TEXT} command allows the author to communicate
373:
374: %% information to the copy editor. This information will appear as a
375:
376: %% footnote on the printed copy for the manuscript style file. Nothing will
377:
378: %% appear on the printed copy if the preprint or
379:
380: %% preprint2 style files are used.
381:
382:
383:
384: %% The eqnarray environment produces multi-line display math. The end of
385:
386: %% each line is marked with a \\. Lines will be numbered unless the \\
387:
388: %% is preceded by a \nonumber command.
389:
390: %% Alignment points are marked by ampersands (&). There should be two
391:
392: %% ampersands (&) per line.
393:
394:
395:
396:
397:
398:
399:
400: %% Putting eqnarrays or equations inside the mathletters environment groups
401:
402: %% the enclosed equations by letter. For instance, the eqnarray below, instead
403:
404: %% of being numbered, say, (4) and (5), would be numbered (4a) and (4b).
405:
406: %% LaTeX the paper and look at the output to see the results.
407:
408:
409:
410:
411:
412: %% This section contains more display math examples, including unnumbered
413:
414: %% equations (displaymath environment). The last paragraph includes some
415:
416: %% examples of in-line math featuring a couple of the AASTeX symbol macros.
417:
418:
419:
420:
421:
422:
423:
424: %% The displaymath environment will produce the same sort of equation as
425:
426: %% the equation environment, except that the equation will not be numbered
427:
428: %% by LaTeX.
429:
430:
431:
432: %% If you wish to include an acknowledgments section in your paper,
433:
434: %% separate it off from the body of the text using the \acknowledgments
435:
436: %% command.
437:
438:
439:
440: %% Included in this acknowledgments section are examples of the
441:
442: %% AASTeX hypertext markup commands. Use \url without the optional [HREF]
443:
444: %% argument when you want to print the url directly in the text. Otherwise,
445:
446: %% use either \url or \anchor, with the HREF as the first argument and the
447:
448: %% text to be printed in the second.
449:
450:
451:
452: \acknowledgments
453:
454: This work is based on observations made with the {\it Spitzer Space Telescope}, which is operated by the Jet Propulsion Laboratory under a NASA contract. P.S. and D.A.N acknowledge funding from LTSA program NAG-13114 to the Johns Hopkins University. We are grateful to J.M. Torrelles for providing us with the NH$_3$ maps. We thank the referee for helpful comments.
455:
456:
457:
458: %%\email{sonnentr@pha.jhu.edu}.
459:
460:
461:
462: %% To help institutions obtain information on the effectiveness of their
463:
464: %% telescopes, the AAS Journals has created a group of keywords for telescope
465:
466: %% facilities. A common set of keywords will make these types of searches
467:
468: %% significantly easier and more accurate. In addition, they will also be
469:
470: %% useful in linking papers together which utilize the same telescopes
471:
472: %% within the framework of the National Virtual Observatory.
473:
474: %% See the AASTeX Web site at http://www.journals.uchicago.edu/AAS/AASTeX
475:
476: %% for information on obtaining the facility keywords.
477:
478:
479:
480: %% After the acknowledgments section, use the following syntax and the
481:
482: %% \facility{} macro to list the keywords of facilities used in the research
483:
484: %% for the paper. Each keyword will be checked against the master list during
485:
486: %% copy editing. Individual instruments or configurations can be provided
487:
488: %% in parentheses, after the keyword, but they will not be verified.
489:
490:
491:
492: {\it Facilities:} \facility{Spitzer (IRS)}.
493:
494:
495:
496: %% Appendix material should be preceded with a single \appendix command.
497:
498: %% There should be a \section command for each appendix. Mark appendix
499:
500: %% subsections with the same markup you use in the main body of the paper.
501:
502:
503:
504: %% Each Appendix (indicated with \section) will be lettered A, B, C, etc.
505:
506: %% The equation counter will reset when it encounters the \appendix
507:
508: %% command and will number appendix equations (A1), (A2), etc.
509:
510:
511:
512:
513:
514: %% The reference list follows the main body and any appendices.
515:
516: %% Use LaTeX's thebibliography environment to mark up your reference list.
517:
518: %% Note \begin{thebibliography} is followed by an empty set of
519:
520: %% curly braces. If you forget this, LaTeX will generate the error
521:
522: %% "Perhaps a missing \item?".
523:
524: %%
525:
526: %% thebibliography produces citations in the text using \bibitem-\cite
527:
528: %% cross-referencing. Each reference is preceded by a
529:
530: %% \bibitem command that defines in curly braces the KEY that corresponds
531:
532: %% to the KEY in the \cite commands (see the first section above).
533:
534: %% Make sure that you provide a unique KEY for every \bibitem or else the
535:
536: %% paper will not LaTeX. The square brackets should contain
537:
538: %% the citation text that LaTeX will insert in
539:
540: %% place of the \cite commands.
541:
542:
543:
544: %% We have used macros to produce journal name abbreviations.
545:
546: %% AASTeX provides a number of these for the more frequently-cited journals.
547:
548: %% See the Author Guide for a list of them.
549:
550:
551:
552: %% Note that the style of the \bibitem labels (in []) is slightly
553:
554: %% different from previous examples. The natbib system solves a host
555:
556: %% of citation expression problems, but it is necessary to clearly
557:
558: %% delimit the year from the author name used in the citation.
559:
560: %% See the natbib documentation for more details and options.
561:
562:
563:
564: \begin{thebibliography}{}
565:
566: \bibitem[Bettens et al.(1995)]{1995ApJ...443..664B} Bettens, R.~P.~A., Lee, H.-H., \& Herbst, E.\ 1995, \apj, 443, 664
567:
568: \bibitem[Boonman et al.(2003)]{boonman03} Boonman, A. M. S., van Dishoeck,E. F., Lahuis, F, Doty, S. D., Wright, C. M., \& Rosenthal, D. 2003, \aap, 399, 1047
569:
570: \bibitem[Boudin et al.(1998)]{1998A&A...331..749B} Boudin, N., Schutte, W.~A., \& Greenberg, J.~M.\ 1998, \aap, 331, 749
571:
572: \bibitem[Brooke et al.(1996)]{1996Natur.383..606B} Brooke, T.~Y., Tokunaga, A.~T., Weaver, H.~A., Crovisier, J., Bockelee-Morvan, D., \& Crisp, D.\ 1996, \nat, 383, 606
573:
574: \bibitem[Carr et al.(1995)]{1995ApJ...450..667C} Carr, J.~S., Evans, N.~J., II, Lacy, J.~H., \& Zhou, S.\ 1995, \apj, 450, 667
575:
576: \bibitem[Charnley \& Kaufman(2000)]{2000ApJ...529L.111C} Charnley, S.~B., \& Kaufman, M.~J.\ 2000, \apjl, 529, L111
577:
578: \bibitem[Codella et al.(2005)]{2005MNRAS.361..244C} Codella, C., Bachiller, R., Benedettini, M., Caselli, P., Viti, S., \& Wakelam, V.\ 2005, \mnras, 361, 244
579:
580: \bibitem[Doty et al.(2002)]{doty02} Doty, S.~D., van Dishoeck, E.~F., van der Tak, F.~F.~S., \& Boonman, A.~M.~S.\ 2002, \aap, 389, 446
581:
582: \bibitem[Evans et al.(1991)]{1991ApJ...383..674E} Evans, N.~J., II, Lacy, J.~H., \& Carr, J.~S.\ 1991, \apj, 383, 674
583:
584: \bibitem[Goetz et al.(1998)]{goetz98} Goetz, J. A., Pipher, J. L., Forrest, W. J., Watson, D. M, Raines, S. N., Woodward, C. E., Greenhouse, M. A., Smith, H. A., Highes, V. A., \& Fischer, J. 1998, \apj, 504, 359
585:
586: \bibitem[G{\'o}mez et al.(1999)]{1999ApJ...514..287G} G{\'o}mez, J.~F., Sargent, A.~I., Torrelles, J.~M., Ho, P.~T.~P., Rodr{\'{\i}}guez, L.~F., Cant{\'o}, J., \& Garay, G.\ 1999, \apj, 514, 287
587:
588: \bibitem[Gonz{\'a}lez-Alfonso et al.(2002)]{2002A&A...386.1074G} Gonz{\'a}lez-Alfonso, E., Wright, C.~M., Cernicharo, J., Rosenthal, D., Boonman, A.~M.~S., \& van Dishoeck, E.~F.\ 2002, \aap, 386, 1074
589:
590: \bibitem[Hasegawa \& Herbst(1993)]{1993MNRAS.263..589H} Hasegawa, T.~I., \& Herbst, E.\ 1993, \mnras, 263, 589
591:
592: \bibitem[Herbst(1995)]{2002A&A...386.1074G} Herbst, E., 1995, Annu. Rev. Phys. Chem. 46, 27
593:
594: \bibitem[Higdon et al.(2004)]{2004PASP..116..975H} Higdon, S.~J.~U., et al.\ 2004, \pasp, 116, 975
595:
596: \bibitem[Hughes \& Wouterloot(1984)]{hug84} Hughes, V. A., \& Wouterloot, J. G. A. 1984, \apj, 276, 204
597:
598: \bibitem[Kaufman \& Neufeld(1996)]{1996ApJ...456..250K} Kaufman, M.~J., \& Neufeld, D.~A.\ 1996, \apj, 456, 250
599:
600: \bibitem[Lahuis \& van Dishoeck(2000)]{lahuis00} Lahuis, F., \& van Dishoeck, E.~F.\ 2000, \aap, 355, 699
601:
602: \bibitem[Lahuis et al.(2007)]{2007ApJ...659..296L} Lahuis, F., et al.\ 2007, \apj, 659, 296
603:
604: \bibitem[Lee et al.(1996)]{1996A&AS..119..111L} Lee, H.-H., Bettens, R.~P.~A., \& Herbst, E.\ 1996, \aaps, 119, 111
605:
606: \bibitem[Neufeld et al.(2006)]{2006ApJ...649..816N} Neufeld, D.~A., et al. 2006, \apj, 649, 816
607:
608: \bibitem[Rodgers \& Charnley(2001)]{2001ApJ...546..324R} Rodgers, S.~D., \& Charnley, S.~B.\ 2001, \apj, 546, 324
609:
610: \bibitem[Ruffle \& Herbst(2000)]{2000MNRAS.319..837R} Ruffle, D.~P., \& Herbst, E.\ 2000, \mnras, 319, 837
611:
612: \bibitem[Sonnentrucker et al.(2006)]{2006ApJ...650L..71S} Sonnentrucker, P., Gonz{\'a}lez-Alfonso, E., Neufeld, D.~A., Bergin, E.~A., Melnick, G.~J., Forrest, W.~J., Pipher, J.~L., \& Watson, D.~M.\ 2006, \apjl, 650, L71
613:
614: \bibitem[Torrelles et al.(1993)]{torre93} Torrelles, J. M., Verdes-Montenegro, L., Ho, T. P., Rodr\'iguez, L. F., \& Cant\'o, J. 1993, \apj, 410, 202
615:
616: \bibitem[van den Ancker et al.(2000)]{ancker0096} van den Ancker, M. E., Tielens, A. A. G. M., \& Wesselius, P. R. 2000, \aap, 358, 1035
617:
618: \bibitem[Weaver et al.(1999)]{1999Icar..142..482W} Weaver, H.~A., et al.\ 1999, Icarus, 142, 482
619:
620: \end{thebibliography}
621:
622:
623:
624: \clearpage
625:
626:
627:
628: %% Use the figure environment and \plotone or \plottwo to include
629:
630: %% figures and captions in your electronic submission.
631:
632: %% To embed the sample graphics in
633:
634: %% the file, uncomment the \plotone, \plottwo, and
635:
636: %% \includegraphics commands
637:
638: %%
639:
640: %% If you need a layout that cannot be achieved with \plotone or
641:
642: %% \plottwo, you can invoke the graphicx package directly with the
643:
644: %% \includegraphics command or use \plotfiddle. For more information,
645:
646: %% please see the tutorial on "Using Electronic Art with AASTeX" in the
647:
648: %% documentation section at the AASTeX Web site,
649:
650: %% http://www.journals.uchicago.edu/AAS/AASTeX.
651:
652: %%
653:
654: %% The examples below also include sample markup for submission of
655:
656: %% supplemental electronic materials. As always, be sure to check
657:
658: %% the instructions to authors for the journal you are submitting to
659:
660: %% for specific submissions guidelines as they vary from
661:
662: %% journal to journal.
663:
664:
665:
666: %% This example uses \plotone to include an EPS file scaled to
667:
668: %% 80% of its natural size with \epsscale. Its caption
669:
670: %% has been written to indicate that additional figure parts will be
671:
672: %% available in the electronic journal.
673:
674: \begin{figure}
675: \epsscale{.50}
676: \plotone{f1a.eps}
677: \plotone{f1b.eps}
678: \caption{\label{fig1} {\it Upper}: Summed IRS spectrum of C$_2$H$_2$ emission toward Cepheus A East. The individual spectra were summed over a $\sim$ 6$''$ $\times$ 8$''$ region centered on the radio-continuum sources HW5/6 positions shown in Figure~2. Note that the emission appearing around 14.05 $\mu$m cannot reliably be attributed to HCN because of a mismatch between the spectral orders containing the C$_2$H$_2$ and CO$_2$ emissions around this wavelength. {\it Lower}: Continuum-subtracted summed spectrum at the HW5/6 positions. Superposed is the calculated C$_2$H$_2$ band spectrum for $T=$ 50, 100, 200, and 600 K. Note the progressive shift of the bandhead and $Q$-branch broadening with increasing temperature.}
679: \end{figure}
680:
681:
682:
683:
684: %% Here we use \plottwo to present two versions of the same figure,
685:
686: %% one in black and white for print the other in RGB color
687:
688: %% for online presentation. Note that the caption indicates
689:
690: %% that a color version of the figure will be available online.
691:
692: %%
693:
694:
695:
696: \begin{figure}
697: \epsscale{.50}
698: \plotone{f2a.eps}
699: \plotone{f2b.eps}
700: \caption{\label{fig2} {\it Upper}: Intensity distribution of gas-phase C$_2$H$_2$. {\it Lower}: Column density distribution of gas-phase C$_2$H$_2$. The coordinates are offsets in arcseconds in Right Ascension and Declination with respect to HW2 (J2000.0: $\alpha=$22$^{h}$56$^{m}$17$^s$.9 and $\delta= +$62$^{\circ}$01$'$49$''$; Hughes \& Wouterloot, 1984), the powering source of the outflow oriented {\it northeast} from HW2 (e.g., Goetz et al. 1998). The gray contours show the distribution of NH$_3$ (1,1) (Torrelles et al. 1993), a tracer of quiescent molecular gas. The lowest contours are 10 and 25 in steps of 25 mJy km s$^{-1}$ beam$^{-1}$. The crosses indicate the positions of other known radio-continuum sources (Hughes \& Wouterloot 1984) and NE denotes the edge of the outflow oriented {\it northeast} from HW2.}
701: \end{figure}
702:
703:
704: \begin{figure}
705: \epsscale{.5}
706: \plotone{f3.eps}
707: \caption{\label{fig3} {\it Upper}: Gas-phase C$_2$H$_2$ line intensity compared to the line intensity of gas-phase CO$_2$ with 1$\sigma$ error bars. {\it Middle}: Column density distributions of gas-phase C$_2$H$_2$ and CO$_2$ in logarithmic scale. {\it Lower:} Column density distribution of gas-phase C$_2$H$_2$ compared to the H$_2$ $S$(2) line intensity in logarithmic scale. In all panels, the datapoints correspond to the spatial positions where the C$_2$H$_2$ line intensities were detected at a $>$ 1.5$\sigma$ level. Intensities are in units of ergs s$^{-1}$ cm$^{-2}$ sr$^{-1}$.}
708: \end{figure}
709:
710: %% This figure uses \includegraphics to scale and rotate the still frame
711:
712: %% for an mpeg animation.
713:
714:
715:
716:
717:
718:
719:
720: %% If you are not including electonic art with your submission, you may
721:
722: %% mark up your captions using the \figcaption command. See the
723:
724: %% User Guide for details.
725:
726: %%
727:
728: %% No more than seven \figcaption commands are allowed per page,
729:
730: %% so if you have more than seven captions, insert a \clearpage
731:
732: %% after every seventh one.
733:
734:
735:
736: %% Tables should be submitted one per page, so put a \clearpage before
737:
738: %% each one.
739:
740:
741:
742: %% Two options are available to the author for producing tables: the
743:
744: %% deluxetable environment provided by the AASTeX package or the LaTeX
745:
746: %% table environment. Use of deluxetable is preferred.
747:
748: %%
749:
750:
751:
752: %% Three table samples follow, two marked up in the deluxetable environment,
753:
754: %% one marked up as a LaTeX table.
755:
756:
757:
758: %% In this first example, note that the \tabletypesize{}
759:
760: %% command has been used to reduce the font size of the table.
761:
762: %% We also use the \rotate command to rotate the table to
763:
764: %% landscape orientation since it is very wide even at the
765:
766: %% reduced font size.
767:
768: %%
769:
770: %% Note also that the \label command needs to be placed
771:
772: %% inside the \tablecaption.
773:
774:
775:
776: %% This table also includes a table comment indicating that the full
777:
778: %% version will be available in machine-readable format in the electronic
779:
780: %% edition.
781:
782:
783:
784:
785:
786: %% If the table is more than one page long, the width of the table can vary
787:
788: %% from page to page when the default \tablewidth is used, as below. The
789:
790: %% individual table widths for each page will be written to the log file; a
791:
792: %% maximum tablewidth for the table can be computed from these values.
793:
794: %% The \tablewidth argument can then be reset and the file reprocessed, so
795:
796: %% that the table is of uniform width throughout. Try getting the widths
797:
798: %% from the log file and changing the \tablewidth parameter to see how
799:
800: %% adjusting this value affects table formatting.
801:
802:
803:
804: %% The \dataset{} macro has also been applied to a few of the objects to
805:
806: %% show how many observations can be tagged in a table.
807:
808:
809:
810:
811:
812:
813:
814: %% Tables may also be prepared as separate files. See the accompanying
815:
816: %% sample file table.tex for an example of an external table file.
817:
818: %% To include an external file in your main document, use the \input
819:
820: %% command. Uncomment the line below to include table.tex in this
821:
822: %% sample file. (Note that you will need to comment out the \documentclass,
823:
824: %% \begin{document}, and \end{document} commands from table.tex if you want
825:
826: %% to include it in this document.)
827:
828:
829:
830: %% \input{table}
831:
832:
833:
834: %% The following command ends your manuscript. LaTeX will ignore any text
835:
836: %% that appears after it.
837:
838:
839:
840: \end{document}
841:
842:
843:
844: %%
845:
846: %% End of file `sample.tex'.
847:
848:
849:
850: