0806.1888/ms.tex
1: 
2: \documentclass[12pt,preprint]{aastex}
3: 
4: %% manuscript produces a one-column, double-spaced document:
5: 
6: %\documentclass[manuscript]{aastex}
7: 
8: %% preprint2 produces a double-column, single-spaced document:
9: 
10: %\documentclass[preprint2]{aastex}
11: 
12: %% Sometimes a paper's abstract is too long to fit on the
13: %% title page in preprint2 mode. When that is the case,
14: %% use the longabstract style option.
15: 
16: %% \documentclass[preprint2,longabstract]{aastex}
17: 
18: \newcommand{\myemail}{t.schmidt@chem.usyd.edu.au}
19: 
20: \shorttitle{hexabenzocoronene} \shortauthors{Kokkin et al.}
21: 
22: \begin{document}
23: 
24: 
25: \title{The optical spectrum of a large isolated polycyclic aromatic
26: hydrocarbon: hexa-\textit{peri}-hexabenzocoronene, C$_{42}$H$_{18}$}
27: 
28: \author{Damian L. Kokkin$^a$, Tyler P. Troy$^a$, Masakazu Nakajima$^a$, Klaas
29: Nauta$^a$, Thomas D. Varberg$^b$, Gregory F. Metha$^c$, Nigel T.
30: Lucas$^a$ and Timothy W. Schmidt\altaffilmark{a,1}}
31: 
32: \affil{$a$ School of Chemistry, The University of Sydney, NSW 2006,
33: Australia\\$b$ Department of Chemistry, Macalester College, St.
34: Paul, MN 55105 USA\\$c$ School of Chemistry \& Physics, The
35: University of Adelaide, SA 5005 Australia\\}
36: 
37: 
38: \altaffiltext{1}{Currently visiting researcher (CNRS) at Laboratoire
39: Photophysique Mol\'eculaire, Universit\'e Paris-Sud XI, Orsay 91405,
40: France. Author to whom correspondence should be addressed. \myemail}
41: 
42: \begin{abstract}
43: The first optical spectrum of an isolated polycyclic aromatic
44: hydrocarbon large enough to survive the photophysical conditions of
45: the interstellar medium is reported. Vibronic bands of the first
46: electronic transition of the all benzenoid polycyclic aromatic
47: hydrocarbon hexa-\textit{peri}-hexabenzocoronene were observed in
48: the $4080-4530\,${\AA} range by resonant 2-color 2-photon ionization
49: spectroscopy. The strongest feature at 4264\,\AA\ is estimated to
50: have an oscillator strength of $f=1.4\times10^{-3}$, placing an
51: upper limit on the interstellar abundance of this polycyclic
52: aromatic hydrocarbon at $4\times10^{12}$\,cm$^{-2}$, accounting for
53: a maximum of $\sim0.02$\% of interstellar carbon. This study opens
54: up the possibility to rigorously test neutral polycyclic aromatic
55: hydrocarbons as carriers of the diffuse interstellar bands in the
56: near future.
57: \end{abstract}
58: 
59: \keywords{molecular data, molecular processes, ISM: abundances, ISM:
60: molecules}
61: 
62: \section{Introduction}
63: 
64: Organic material such as polycyclic aromatic hydrocarbons (PAHs) are
65: held responsible for infrared emission features in carbon rich
66: objects (AIBs) and has been suggested to account for as much as 20\%
67: of interstellar carbon \citep{Leger1984,Allamandola85,Snow1995}. In
68: addition, PAHs are considered leading candidates as carriers of the
69: diffuse interstellar bands \citep{Leger1985,Crawford85,Salama1999},
70: a series of diffuse absorption features superimposed on the
71: extinction curve of the interstellar medium (ISM). The identities of
72: the carriers of these bands remain the longest unsolved problem of
73: laboratory astrophysics \citep{Herbig1995,Sarre2006}. A scenario
74: linking the AIBs to the DIBs is that amorphous aromatic material
75: formed in carbon rich stellar outflows is further processed into
76: PAHs and eventually the DIB carriers by the interstellar
77: photophysical environment \citep{Goto2003, Sloan2007, pino08}.
78: 
79: Despite the extensive literature reporting on PAHs in the ISM, not a
80: single PAH species has ever been observed astronomically. This may
81: be partly due to a paucity of laboratory data with which to compare
82: unidentified features in astronomical spectra, or to guide
83: astronomical searches. Obtaining optical spectra of isolated
84: molecules at low temperature (as in diffuse clouds), \emph{in
85: vacuo}, remains a challenge of modern laboratory astrophysics
86: \citep{Sharp2005}.
87: 
88: Modelling of generic PAHs in the diffuse interstellar medium aims to
89: guide the laboratory search for the carriers of the DIBs.
90: \citet{Leger1985} found that species must contain no fewer than
91: fifteen atoms if they are to avoid photo-thermolysis and
92: \citet{Lepage2003} concluded that PAHs containing more than about 30
93: carbon atoms would be largely stable. Furthermore, it is considered
94: that a large proportion of interstellar PAH material would exist in
95: its ionized form(s) \citep{Crawford85}. As such, the challenge to
96: laboratory-based scientists is to place large PAHs into the vacuum,
97: cool them down, perhaps ionize them and obtain their spectra. Prior
98: to the present work, the largest neutral PAH
99:  studied spectroscopically in such a way was ovalene
100: (C$_{32}$H$_{14}$), the size of which is borderline for surviving
101: the ISM intact \citep{Amirav1980}.
102: 
103: 
104: An unguided laboratory search is daunting, however, as for systems
105: containing $4-10$ fused aromatic rings there are over 20000 possible
106: PAH structures \citep{Dias2004}. In order to guide the laboratory
107: search for DIB carriers, some selection mechanism is required, based
108: on spectral intensity, or structure. Recently we suggested that
109: all-benzenoid PAHs (ABPAHs) could represent such a selection
110: mechanism \citep{Troy2006}. These ABPAHs are formed from fused
111: benzene rings which may be drawn as being separated by single bonds.
112: They are characterized by higher ionization potentials and more
113: energetic electronic transitions than their non all-benzenoid
114: isomers. Of the more than 20000 possible structures containing
115: $4-10$ fused rings, only 17 are all-benzenoid in character. The
116: all-benzenoid structural motif thus provides a selection mechanism
117: for the laboratory and perhaps the ISM. Since the ABPAHs are
118: comparatively easy to prepare in the laboratory, it may also be that
119: they form preferentially in the ISM. We obtained the gas phase
120: spectrum of the smallest member of this family: triphenylene
121: (C$_{18}$H$_{12}$)\citep{Kokkin2007}. However, its small size means
122: that even its lowest energy transitions are in the ultraviolet, far
123: from the shortest wavelength DIBs. The ABPAHs present three optical
124: band systems named the $\alpha$, $p$ and $\beta$-bands in increasing
125: intensity and energy. We found that for the strong $\beta$-band
126: system to fall in the DIB region, it must contain no fewer than 84
127: carbon atoms \citep{Troy2006}. However,
128: Hexa-\emph{peri}-hexabenzocoronene (HBC) is known to exhibit the
129: weaker $\alpha$-bands in the region of the DIBs. HBC , pictured in
130: Fig. \ref{fig}, possesses 42 carbon atoms and is thus large enough
131: to survive the interstellar radiation field, as modelled by
132: \citet{Lepage2003}. Since its lowest energy transitions occur in the
133: visible region, near the strongest DIB (4429\,\AA\ in air) it was
134: suggested as a carrier of this interstellar band by
135: \citet{Hendel1986} who obtained spectra in a 1,2,4-trichlorobenzene
136: solution. Furthermore, its red phosphorescence suggested that it
137: could also be a carrier of the \emph{Red Rectangle} Bands, the
138: unidentified emission features superimposed on the extended red
139: emission of the protoplanetary nebula surrounding HD 44179
140: \citep{Cohen1975,Schmidt1980}. \citet{Hendel1986} also measured the
141: mass spectrum of HBC and found that while HBC$^{2+}$ and HBC$^{3+}$
142: were abundantly produced, there was very little H-loss, suggesting
143: it to be a very tough molecule of the sort required to survive harsh
144: interstellar radiation. Despite these suggestions, a gas phase
145: spectrum of HBC has never been reported. In this letter we present
146: the gas phase spectrum of jet-cooled, neutral
147: hexa-\emph{peri}-hexabenzocoronene (HBC, C$_{42}$H$_{18}$). From
148: these measurements an upper limit on the column density of HBC in
149: the diffuse interstellar medium (DISM) is obtained.
150: 
151: \section{Experimental Methods}
152: 
153: HBC was synthesized in our laboratory using the general procedure of
154: \citet{Fechtenkotter1999} for the synthesis of C$_6$-symmetric HBC
155: derivatives. We estimate the purity of our sample as $>97$\% based
156: on MALDI-TOF mass spectrometry.
157: 
158: The target species was seeded in argon by ablating the solid HBC
159: sample with laser pulses (3.5\,mJ/pulse, 532\,nm) produced by a
160: Nd:YAG laser system. The seeded carrier gas was then expanded into
161: the source chamber where cooling occurred in a supersonic expansion.
162: The free jet was collimated with a 2\,mm diameter skimmer and passed
163: into the extraction chamber.
164: 
165: The jet-cooled HBC molecules were cooperatively ionized by two laser
166: pulses. The wavelength of the first laser pulse was tuned to place
167: HBC molecules into an excited state from where they could be ionized
168: by the second, fixed wavelength pulse. Tunable radiation was
169: provided by a 308 nm pumped dye laser operating with Exalite 417 and
170: Coumarin 440 laser dyes to scan the region of interest, 408-455 nm
171: ($2.73-3.04$\,eV). The laser was weakly focused into the apparatus.
172: The ionization pulse was provided by the doubled output of an
173: optical parametric oscillator, pumped by a Nd:YAG laser system,
174: producing 213\,nm (5.82\,eV) which is able to ionize the excited
175: state HBC: The reported ionization potential of HBC is 6.86\,eV
176: \citep{Hendel1986}. This beam was aligned so as to counter-propagate
177: the tunable radiation. The nozzle and laser were pulsed at 10\,Hz.
178: 
179: The positive ions were extracted vertically and perpendicular to the
180: laser and molecular beam into the time-of-flight tube. The
181: accelerating voltage was 2050\,V, applied to the bottom extraction
182: grid. Ions were detected with a tandem microchannel plate.
183: 
184: The signal from the microchannel plate was buffered by a digital
185: oscilloscope and processed on a desktop computer running in-house
186: software. The synchronization and triggering of all the equipment
187: was carried out using a multiple output programmable delay
188: generator.
189: 
190: \begin{figure}[h]
191: \begin{center}
192: \includegraphics[width = 16cm]{f1.eps}
193: \caption{\label{fig} The excitation spectrum of
194: hexa-\textit{peri}-hexabenzocoronene (bottom) and a reconstruction
195: of the diffuse interstellar band spectrum (top) from
196: \citet{Jenniskens1994}. The arrow denotes an estimate of the the
197: position of the forbidden origin band, based on the solution phase
198: spectra of \citet{Hendel1986}.}
199: \end{center}
200: \end{figure}
201: 
202: %% In this section, we use  the \subsection command to set off
203: %% a subsection.  \footnote is used to insert a footnote to the text.
204: 
205: %% Observe the use of the LaTeX \label
206: %% command after the \subsection to give a symbolic KEY to the
207: %% subsection for cross-referencing in a \ref command.
208: %% You can use LaTeX's \ref and \label commands to keep track of
209: %% cross-references to sections, equations, tables, and figures.
210: %% That way, if you change the order of any elements, LaTeX will
211: %% automatically renumber them.
212: 
213: %% This section also includes several of the displayed math environments
214: %% mentioned in the Author Guide.
215: 
216: \section{Results and Discussion}
217: The resonant 2-color 2-photon ionization spectrum of HBC is plotted
218: in Fig. \ref{fig}. While an attempt was made to normalize the
219: spectrum for laser power, relative intensities become increasingly
220: unreliable towards 4100\,\AA. The spectrum reported here is for the
221: 522 amu ($^{12}$C$_{42}\,^{1}$H$_{18}$) mass only, and as such the
222: spectrum represents only the most abundant isotopomer (64\%). A
223: detailed analysis of the spectrum, including the other isotopomers,
224: will be published elsewhere.
225: 
226: The main features are positioned at vacuum wavelengths of 4335.2 and
227: 4264.1\,\AA\ (FWHM 1.5\,\AA). These are labeled $a$ and $b$ in Fig.
228: \ref{fig}. The band width is related to the rotational temperature
229: which is typically 30\,K in our experiments. We attribute the
230: cluster of smaller peaks immediately to longer wavelength of these
231: main features to `hot' bands, which are transitions arising from
232: excited vibrational levels of the electronic ground state that
233: remain populated by incomplete cooling in the supersonic expansion.
234: To higher energy than these main features lie transitions involving
235: quanta of totally symmetric vibrations built onto bands $a$ and $b$.
236: 
237: Preliminary quantum mechanical considerations reveal, that when
238: viewed on the central ring, the highest occupied molecular orbitals
239: and the lowest unoccupied molecular orbitals are the same as those
240: of benzene, which has the same symmetry ($D_{6h}$ point group). As
241: such, the symmetries of the lowest transitions of HBC are the same
242: as benzene. The lowest energy transition is thus of
243: $B_{2u}\leftarrow A_{1g}$ electronic character, induced by
244: vibrational modes of $e_{2g}$ symmetry. An estimate of the position
245: of the forbidden origin band is indicated by an arrow in Fig.
246: \ref{fig}. A detailed quantum mechanical treatment is beyond the
247: scope of the present article and will be presented elsewhere. We
248: assign the bands $a$ and $b$ to false origins arising from single
249: quanta of vibrational modes of $e_{2g}$ symmetry. An estimate of the
250: oscillator strength of the strongest band, $b$, may be made by
251: integrating over the molar extinction coefficient,
252: $\epsilon(\lambda)$, of the strongest visible region band in the
253: solution phase spectra of \citet{Hendel1986}, at 4450\,\AA,
254: \begin{equation}
255: f
256: =\frac{4.28\times10^{-11}}{\lambda^2}\int\epsilon(\lambda)d\lambda,\nonumber
257: \end{equation}
258: with $\lambda$ in m and $\epsilon$ in L\,mol$^{-1}$\,cm$^{-1}$.  As
259: such, the oscillator strength of $b$ is estimated to be
260: $f=1.4\times10^{-3}$.
261: 
262: Within the region of the spectrum plotted in Fig. \ref{fig} there
263: are several DIBs. These are plotted as negative going peaks above
264: the experimental spectrum with vacuum wavelengths of 4177.6, 4430.1
265: and 4503.0\AA. It is immediately clear that the experimental
266: spectrum does not match any hitherto reported DIB. It is also clear
267: that the 4177.6 and 4430.1\,\AA\ DIBs in particular are very broad
268: compared to the observed band and it is therefore unlikely that
269: these interstellar bands arise from transitions to the first excited
270: state of medium-sized PAHs such as HBC. Transitions to higher
271: electronic states will exhibit broader bands and stronger spectra.
272: 
273: The non-observation of HBC in the DIB spectrum allows us to estimate
274: an upper limit of the column density of HBC in the DISM using
275: \begin{equation}
276: N_{max} = 1.13\times10^{20}\frac{W_{max}}{\lambda^2 f}
277: \mathrm{\,cm}^{-2},\nonumber
278: \end{equation}
279: with $\lambda$ and $W_{max}$ in \AA. %\citep{Spitzer78}.
280: From our estimated oscillator strength, assuming a detection limit
281: of 1\,m{\AA} equivalent width, an upper limit on the column density
282: of HBC may be placed at $N_{max}=4\times10^{12}$\,cm$^{-2}$. Taking
283: the total carbon column density of $N_C=1\times10^{18}$ in a typical
284: DIB sightline, the HBC neutral represents a maximum of
285: $2\times10^{-4}$ as a fraction of interstellar carbon.
286: 
287: However, due to the exceptional properties of HBC an astronomical
288: search for the molecule is warranted. The next step in the
289: laboratory is to obtain the spectrum of HBC$^{n+}$, which is a more
290: difficult task in the gas phase. Nevertheless, the present work
291: makes it possible to produce cold cations in the gas phase by
292: threshold ionization through the 4261\,\AA\ band.
293: 
294: \section{Conclusions}
295: 
296: We have succeeded in obtaining the excitation spectrum of
297: hexa-\emph{peri}-hexabenzocoronene (C$_{42}$H$_{18}$) as a
298: jet-cooled, isolated molecule in the vacuum. Its strongest
299: transition in the region studied was found to lie at 4261.1\,\AA,
300: which does not correspond to any known diffuse interstellar band. An
301: estimate of the oscillator strength of this band was made at
302: $f=1.4\times10^{-3}$, which afforded an upper limit on the
303: interstellar abundance of HBC of $4\times10^{12}$\,cm$^{-2}$, or
304: 0.02\% of interstellar carbon. However, the same technique can be
305: used to obtain the spectra of still larger and less symmetric
306: systems which may exhibit much stronger transitions. The collection
307: and analysis of the spectra of these all benzenoid PAH species
308: builds up the database of gas phase spectra required to constrain
309: models of PAH abundances in the ISM in concert with detailed
310: observation. In particular, an exploration of larger PAHs with
311: strong ($f\sim1$) transitions will provide a rigorous test of
312: neutral PAHs as carriers of the DIBs, thus opening the door to
313: solving the longest standing mystery in astronomical spectrocopy, or
314: putting to bed a long-favored class of candidate.
315: 
316: There remains an impetus to collect spectra of cold PAH cations. The
317: present work establishes the ability to place PAHs of 42 carbons in
318: the vacuum by laser desorption and supersonic expansion. The next
319: step is to produce the cold cations by threshold ionization and
320: obtain their spectra by multiphoton dissociation \citep{Pino2007}.
321: 
322: %% If you wish to include an acknowledgments section in your paper,
323: %% separate it off from the body of the text using the \acknowledgments
324: %% command.
325: 
326: %% Included in this acknowledgments section are examples of the
327: %% AASTeX hypertext markup commands. Use \url without the optional [HREF]
328: %% argument when you want to print the url directly in the text. Otherwise,
329: %% use either \url or \anchor, with the HREF as the first argument and the
330: %% text to be printed in the second.
331: 
332: \acknowledgments
333: 
334: We are grateful to Thomas Pino for helpful discussions while
335: preparing this manuscript. DLK and TPT thank the University of
336: Sydney for a University Postgraduate Award. KN and NTL acknowledge
337: the Australian Research Council for the award of an Australian
338: Research Fellowship and an Australian Postdoctoral Fellowship.
339: Acknowledgment is made by TDV to the Donors of the American Chemical
340: Society Petroleum Research Fund for partial support of this
341: research. This research was supported under the Australian Research
342: Council's Discovery funding scheme (project numbers DP0665824,
343: DP0665831, DP0346380, DP0666236 and DP0556336) and the Australian
344: Research Council's Linkage Infrastructure Equipment and Facilities
345: funding scheme (project number LE0560658).
346: 
347: %% To help institutions obtain information on the effectiveness of their
348: %% telescopes, the AAS Journals has created a group of keywords for telescope
349: %% facilities. A common set of keywords will make these types of searches
350: %% significantly easier and more accurate. In addition, they will also be
351: %% useful in linking papers together which utilize the same telescopes
352: %% within the framework of the National Virtual Observatory.
353: %% See the AASTeX Web site at http://www.journals.uchicago.edu/AAS/AASTeX
354: %% for information on obtaining the facility keywords.
355: 
356: %% After the acknowledgments section, use the following syntax and the
357: %% \facility{} macro to list the keywords of facilities used in the research
358: %% for the paper.  Each keyword will be checked against the master list during
359: %% copy editing.  Individual instruments or configurations can be provided
360: %% in parentheses, after the keyword, but they will not be verified.
361: 
362: %% Appendix material should be preceded with a single \appendix command.
363: %% There should be a \section command for each appendix. Mark appendix
364: %% subsections with the same markup you use in the main body of the paper.
365: 
366: %% Each Appendix (indicated with \section) will be lettered A, B, C, etc.
367: %% The equation counter will reset when it encounters the \appendix
368: %% command and will number appendix equations (A1), (A2), etc.
369: 
370: %% The reference list follows the main body and any appendices.
371: %% Use LaTeX's thebibliography environment to mark up your reference list.
372: %% Note \begin{thebibliography} is followed by an empty set of
373: %% curly braces.  If you forget this, LaTeX will generate the error
374: %% "Perhaps a missing \item?".
375: %%
376: %% thebibliography produces citations in the text using \bibitem-\cite
377: %% cross-referencing. Each reference is preceded by a
378: %% \bibitem command that defines in curly braces the KEY that corresponds
379: %% to the KEY in the \cite commands (see the first section above).
380: %% Make sure that you provide a unique KEY for every \bibitem or else the
381: %% paper will not LaTeX. The square brackets should contain
382: %% the citation text that LaTeX will insert in
383: %% place of the \cite commands.
384: 
385: %% We have used macros to produce journal name abbreviations.
386: %% AASTeX provides a number of these for the more frequently-cited journals.
387: %% See the Author Guide for a list of them.
388: 
389: %% Note that the style of the \bibitem labels (in []) is slightly
390: %% different from previous examples.  The natbib system solves a host
391: %% of citation expression problems, but it is necessary to clearly
392: %% delimit the year from the author name used in the citation.
393: %% See the natbib documentation for more details and options.
394: 
395: 
396: 
397: 
398: 
399: 
400: 
401: 
402: 
403: 
404: 
405: 
406: 
407: \begin{thebibliography}{}
408: \bibitem[Allamandola, Tielens \& Barker(1985)]{Allamandola85} Allamandola, L. J., Tielens A. G. G. M.,
409: Barker, J. R. 1985, \apjl, 290, L25
410: \bibitem[Amirav, Even \& Jorter(1980)]{Amirav1980} Amirav, A., Even,
411: U., \& Jortner, J 1980, Chem. Phys. Lett., 69, 14
412: \bibitem[Cohen et al.(1975)]{Cohen1975} Cohen, M., Anderson, C. M., Cowley, A., Coyne, G. V., Fawley,
413: W., Gull, T. R., Harlan, E. A., Herbig, G. H., Holden, F., Hudson,
414: H. S., Jakoubek, R. O., Johnson, H. M., Merrill, K. M., Schiffer, F.
415: H., Soifer, B. T. \& Zuckerman, B. 1975, \apj, 196, 179
416: \bibitem[Crawford, Tielens \& Allamandola(1985)]{Crawford85} Crawford, M. K., Tielens, A. G. G. M., \&
417: Allamandola, L. J. 1985, \apjl, 295, L45
418: \bibitem[Dias(2004)]{Dias2004} Dias, J. R. 2004, Aust. J. Chem., 57, 1039
419: \bibitem[Fechtenk\"otter et al.(1999)]{Fechtenkotter1999}Fechtenk\"otter, A., Saalw\"achter, K., Harbison, M. A., M\"ullen, K.,
420: \& Spiess, H. W. 1999, Angew. Chem. Int. Ed., 38, 3039
421: 
422: \bibitem[{{Goto} {et~al.}(2003)]{Goto}, {Gaessler}, {Hayano}, {Iye},
423: {Kamata}, {Kanzawa}, {Kobayashi}, {Minowa}, {Saint-Jacques},
424: {Takami}, {Takato}, \& {Terada}}]{Goto2003} {Goto}, M., {Gaessler},
425: W., {Hayano}, Y., {et~al.} 2003, \apj, 589, 419
426: 
427: \bibitem[{{Sloan} {et~al.}(2007){Sloan}, {Jura}, {Duley}, {Kraemer},
428: {Bernard-Salas}, {Forrest}, {Sargent}, {Li}, {Barry}, {Bohac},
429: {Watson}, \& {Houck}}]{Sloan2007} {Sloan}, G.~C., {Jura}, M.,
430: {Duley}, W.~W., {et~al.} 2007, \apj, 664, 1144
431: 
432: \bibitem[Hendel, Khan \& Schmidt(1986)]{Hendel1986} Hendel, W., Khan, Z. H., \& Schmidt, W. 1986, Tetrahedron, 42, 1127
433: \bibitem[Herbig(1995)]{Herbig1995} Herbig, G. H. 1995, \apj, 196, 129
434: \bibitem[Jenniskens \& D\'esert(1994)]{Jenniskens1994} Jenniskens,
435: P., \& D\'esert, F.-X. 1994, \aaps, 106, 39
436: \bibitem[Kokkin et al.(2007)]{Kokkin2007} Kokkin D. L., Reilly, N. J., Troy, T. P., Nauta, K., \& Schmidt, T. W. 2007, \jcp, 126, 084304
437: \bibitem[L\'eger \& d'Hendecourt(1985)]{Leger1985} L\'eger, A., \& d'Hendecourt L., 1985, \aap, 146, 81
438: \bibitem[L\'eger \& Puget(1984)]{Leger1984} L\'eger, A., \& Puget, J. L. 1984, \aap, 137,
439: L5
440: \bibitem[Le Page, Snow \& Bierbaum(2003)]{Lepage2003} Le Page V., Snow, T. P., \& Bierbaum, V. M. 2003, \apj, 584, 316
441: \bibitem[Pino et al.(2007)]{Pino2007} Pino, T., Douin, S., Boudin, N., \& Brechignac, P. 2007, J. Phys. Chem. A, 111, 13358
442: 
443: \bibitem[Pino et al.(2008)]{pino08} Pino, T., Dartois, E., Cao, A.-T., Carpentier, Y., Chamaill, Th.,
444: Vasquez, R., Jones, A., d'Hendecourt, L. and Br\'echignac, Ph. A\&A
445: \emph{submitted}
446: 
447: \bibitem[Salama et al.(1999)]{Salama1999}
448: Salama, F., Galazutdinov, G. A., Krelowski, J., Allamandola, L. J.,
449: \& Musaev, F. A. 1999, \apj, 526, 265
450: \bibitem[Sarre(2006)]{Sarre2006} Sarre, P. J. 2006, J. Mol. Spec, 238, 1
451: \bibitem[Schmidt, Cohen \& Margon(1980)]{Schmidt1980} Schmidt, G. D., Cohen, M. \& Margon,
452: B. 1980 \apj, 239, L133
453: \bibitem[Sharp \& Schmidt(2005)]{Sharp2005} Sharp, R. G., \& Schmidt, T. W. 2005, Aust. J. Chem, 58, 69
454: \bibitem[Snow \& Witt(1995)]{Snow1995} Snow, T. P., \& Witt, A. N.
455: 1995, Science, 270, 1455
456: \bibitem[Troy \& Schmidt(2006)]{Troy2006} Troy T. P., \& Schmidt, T. W. 2006, \mnras, 371, L41
457: 
458: 
459: 
460: %\bibitem[Teyssier(2004)]{Teyssier2004} Teyssier, D., Foss\'e, D., Gerin, M., Pety, J., Abergel,
461: %A., \& Roueff, E. 2004, \aap, 417, 135
462: 
463: \end{thebibliography}
464: 
465: \clearpage
466: 
467: %% Use the figure environment and \plotone or \plottwo to include
468: %% figures and captions in your electronic submission.
469: %% To embed the sample graphics in
470: %% the file, uncomment the \plotone, \plottwo, and
471: %% \includegraphics commands
472: %%
473: %% If you need a layout that cannot be achieved with \plotone or
474: %% \plottwo, you can invoke the graphicx package directly with the
475: %% \includegraphics command or use \plotfiddle. For more information,
476: %% please see the tutorial on "Using Electronic Art with AASTeX" in the
477: %% documentation section at the AASTeX Web site,
478: %% http://www.journals.uchicago.edu/AAS/AASTeX.
479: %%
480: %% The examples below also include sample markup for submission of
481: %% supplemental electronic materials. As always, be sure to check
482: %% the instructions to authors for the journal you are submitting to
483: %% for specific submissions guidelines as they vary from
484: %% journal to journal.
485: 
486: %% This example uses \plotone to include an EPS file scaled to
487: %% 80% of its natural size with \epsscale. Its caption
488: %% has been written to indicate that additional figure parts will be
489: %% available in the electronic journal.
490: 
491: %\begin{figure}
492: %\epsscale{.80}
493: %\plotone{f1.eps}
494: %\caption{Derived spectra for 3C138 \citep[see][]{heiles03}. Plots for all sources are available
495: %in the electronic edition of {\it The Astrophysical Journal}.\label{fig1}}
496: %\end{figure}
497: 
498: %\clearpage
499: 
500: %% Here we use \plottwo to present two versions of the same figure,
501: %% one in black and white for print the other in RGB color
502: %% for online presentation. Note that the caption indicates
503: %% that a color version of the figure will be available online.
504: %%
505: 
506: %\begin{figure}
507: %\plottwo{f2.eps}{f2_color.eps}
508: %\caption{A panel taken from Figure 2 of \citet{rudnick03}.
509: %See the electronic edition of the Journal for a color version
510: %of this figure.\label{fig2}}
511: %\end{figure}
512: 
513: %% This figure uses \includegraphics to scale and rotate the still frame
514: %% for an mpeg animation.
515: 
516: %\begin{figure}
517: %\includegraphics[angle=90,scale=.50]{f3.eps}
518: %\caption{Animation still frame taken from \citet{kim03}.
519: %This figure is also available as an mpeg
520: %animation in the electronic edition of the
521: %{\it Astrophysical Journal}.}
522: %\end{figure}
523: 
524: 
525: 
526: \end{document}
527: 
528: %%
529: %% End of file `sample.tex'.
530: