1: % aa.dem
2: % AA vers. 6.1, LaTeX class for Astronomy & Astrophysics
3: % demonstration file
4: % (c) Springer-Verlag HD
5: % revised by EDP Sciences
6: %-----------------------------------------------------------------------
7: %
8: %\documentclass[referee]{aa} % for a referee version
9: %\documentclass[onecolumn]{aa} % for a paper on 1 column
10: %\documentclass[longauth]{aa} % for the long lists of affiliations
11: %\documentclass[rnote]{aa} % for the research notes
12: %\documentclass[letter]{aa} % for the letters
13: %
14: \documentclass{aa}
15: %
16: \usepackage{graphicx}
17: %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
18: \usepackage{txfonts}
19: %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
20: %
21: \begin{document}
22: %
23: \title{Hydrodynamics of giant planet formation}
24:
25: \subtitle{I. Overviewing the $\kappa$-mechanism}
26:
27: \author{G. Wuchterl
28: \inst{1}
29: \and
30: C. Ptolemy\inst{2}\fnmsep\thanks{Just to show the usage
31: of the elements in the author field}
32: }
33:
34: \offprints{G. Wuchterl}
35:
36: \institute{Institute for Astronomy (IfA), University of Vienna,
37: T\"urkenschanzstrasse 17, A-1180 Vienna\\
38: \email{wuchterl@amok.ast.univie.ac.at}
39: \and
40: University of Alexandria, Department of Geography, ...\\
41: \email{c.ptolemy@hipparch.uheaven.space}
42: \thanks{The university of heaven temporarily does not
43: accept e-mails}
44: }
45:
46: \date{Received September 15, 1996; accepted March 16, 1997}
47:
48: % \abstract{}{}{}{}{}
49: % 5 {} token are mandatory
50:
51: \abstract
52: % context heading (optional)
53: % {} leave it empty if necessary
54: {To investigate the physical nature of the `nuc\-leated instability' of
55: proto giant planets, the stability of layers
56: in static, radiative gas spheres is analysed on the basis of Baker's
57: standard one-zone model.}
58: % aims heading (mandatory)
59: {It is shown that stability
60: depends only upon the equations of state, the opacities and the local
61: thermodynamic state in the layer. Stability and instability can
62: therefore be expressed in the form of stability equations of state
63: which are universal for a given composition.}
64: % methods heading (mandatory)
65: {The stability equations of state are
66: calculated for solar composition and are displayed in the domain
67: $-14 \leq \lg \rho / \mathrm{[g\, cm^{-3}]} \leq 0 $,
68: $ 8.8 \leq \lg e / \mathrm{[erg\, g^{-1}]} \leq 17.7$. These displays
69: may be
70: used to determine the one-zone stability of layers in stellar
71: or planetary structure models by directly reading off the value of
72: the stability equations for the thermodynamic state of these layers,
73: specified
74: by state quantities as density $\rho$, temperature $T$ or
75: specific internal energy $e$.
76: Regions of instability in the $(\rho,e)$-plane are described
77: and related to the underlying microphysical processes.}
78: % results heading (mandatory)
79: {Vibrational instability is found to be a common phenomenon
80: at temperatures lower than the second He ionisation
81: zone. The $\kappa$-mechanism is widespread under `cool'
82: conditions.}
83: % conclusions heading (optional), leave it empty if necessary
84: {}
85:
86: \keywords{giant planet formation --
87: $\kappa$-mechanism --
88: stability of gas spheres
89: }
90:
91: \maketitle
92: %
93: %________________________________________________________________
94:
95: \section{Introduction}
96:
97: In the \emph{nucleated instability\/} (also called core
98: instability) hypothesis of giant planet
99: formation, a critical mass for static core envelope
100: protoplanets has been found. Mizuno (\cite{mizuno}) determined
101: the critical mass of the core to be about $12 \,M_\oplus$
102: ($M_\oplus=5.975 \times 10^{27}\,\mathrm{g}$ is the Earth mass), which
103: is independent of the outer boundary
104: conditions and therefore independent of the location in the
105: solar nebula. This critical value for the core mass corresponds
106: closely to the cores of today's giant planets.
107:
108: Although no hydrodynamical study has been available many workers
109: conjectured that a collapse or rapid contraction will ensue
110: after accumulating the critical mass. The main motivation for
111: this article
112: is to investigate the stability of the static envelope at the
113: critical mass. With this aim the local, linear stability of static
114: radiative gas spheres is investigated on the basis of Baker's
115: (\cite{baker}) standard one-zone model.
116:
117: Phenomena similar to the ones described above for giant planet
118: formation have been found in hydrodynamical models concerning
119: star formation where protostellar cores explode
120: (Tscharnuter \cite{tscharnuter}, Balluch \cite{balluch}),
121: whereas earlier studies found quasi-steady collapse flows. The
122: similarities in the (micro)physics, i.e., constitutive relations of
123: protostellar cores and protogiant planets serve as a further
124: motivation for this study.
125:
126: %__________________________________________________________________
127:
128: \section{Baker's standard one-zone model}
129:
130: % Two column figure (place early!)
131: %______________________________________________ Gamma_1 (lg rho, lg e)
132: \begin{figure*}
133: \centering
134: %%%\includegraphics{empty.eps}
135: %%%\includegraphics{empty.eps}
136: %%%\includegraphics{empty.eps}
137: \caption{Adiabatic exponent $\Gamma_1$.
138: $\Gamma_1$ is plotted as a function of
139: $\lg$ internal energy $\mathrm{[erg\,g^{-1}]}$ and $\lg$
140: density $\mathrm{[g\,cm^{-3}]}$.}
141: \label{FigGam}%
142: \end{figure*}
143: %
144: In this section the one-zone model of Baker (\cite{baker}),
145: originally used to study the Cephe{\"{\i}}d pulsation mechanism, will
146: be briefly reviewed. The resulting stability criteria will be
147: rewritten in terms of local state variables, local timescales and
148: constitutive relations.
149:
150: Baker (\cite{baker}) investigates the stability of thin layers in
151: self-gravitating,
152: spherical gas clouds with the following properties:
153: \begin{itemize}
154: \item hydrostatic equilibrium,
155: \item thermal equilibrium,
156: \item energy transport by grey radiation diffusion.
157: \end{itemize}
158: For the one-zone-model Baker obtains necessary conditions
159: for dynamical, secular and vibrational (or pulsational)
160: stability (Eqs.\ (34a,\,b,\,c) in Baker \cite{baker}). Using Baker's
161: notation:
162: \[
163: \begin{array}{lp{0.8\linewidth}}
164: M_{r} & mass internal to the radius $r$ \\
165: m & mass of the zone \\
166: r_0 & unperturbed zone radius \\
167: \rho_0 & unperturbed density in the zone \\
168: T_0 & unperturbed temperature in the zone \\
169: L_{r0} & unperturbed luminosity \\
170: E_{\mathrm{th}} & thermal energy of the zone
171: \end{array}
172: \]
173: \noindent
174: and with the definitions of the \emph{local cooling time\/}
175: (see Fig.~\ref{FigGam})
176: \begin{equation}
177: \tau_{\mathrm{co}} = \frac{E_{\mathrm{th}}}{L_{r0}} \,,
178: \end{equation}
179: and the \emph{local free-fall time}
180: \begin{equation}
181: \tau_{\mathrm{ff}} =
182: \sqrt{ \frac{3 \pi}{32 G} \frac{4\pi r_0^3}{3 M_{\mathrm{r}}}
183: }\,,
184: \end{equation}
185: Baker's $K$ and $\sigma_0$ have the following form:
186: \begin{eqnarray}
187: \sigma_0 & = & \frac{\pi}{\sqrt{8}}
188: \frac{1}{ \tau_{\mathrm{ff}}} \\
189: K & = & \frac{\sqrt{32}}{\pi} \frac{1}{\delta}
190: \frac{ \tau_{\mathrm{ff}} }
191: { \tau_{\mathrm{co}} }\,;
192: \end{eqnarray}
193: where $ E_{\mathrm{th}} \approx m (P_0/{\rho_0})$ has been used and
194: \begin{equation}
195: \begin{array}{l}
196: \delta = - \left(
197: \frac{ \partial \ln \rho }{ \partial \ln T }
198: \right)_P \\
199: e=mc^2
200: \end{array}
201: \end{equation}
202: is a thermodynamical quantity which is of order $1$ and equal to $1$
203: for nonreacting mixtures of classical perfect gases. The physical
204: meaning of $ \sigma_0 $ and $K$ is clearly visible in the equations
205: above. $\sigma_0$ represents a frequency of the order one per
206: free-fall time. $K$ is proportional to the ratio of the free-fall
207: time and the cooling time. Substituting into Baker's criteria, using
208: thermodynamic identities and definitions of thermodynamic quantities,
209: \begin{displaymath}
210: \Gamma_1 = \left( \frac{ \partial \ln P}{ \partial\ln \rho}
211: \right)_{S} \, , \;
212: \chi^{}_\rho = \left( \frac{ \partial \ln P}{ \partial\ln \rho}
213: \right)_{T} \, , \;
214: \kappa^{}_{P} = \left( \frac{ \partial \ln \kappa}{ \partial\ln P}
215: \right)_{T}
216: \end{displaymath}
217: \begin{displaymath}
218: \nabla_{\mathrm{ad}} = \left( \frac{ \partial \ln T}
219: { \partial\ln P} \right)_{S} \, , \;
220: \chi^{}_T = \left( \frac{ \partial \ln P}
221: { \partial\ln T} \right)_{\rho} \, , \;
222: \kappa^{}_{T} = \left( \frac{ \partial \ln \kappa}
223: { \partial\ln T} \right)_{T}
224: \end{displaymath}
225: one obtains, after some pages of algebra, the conditions for
226: \emph{stability\/} given
227: below:
228: \begin{eqnarray}
229: \frac{\pi^2}{8} \frac{1}{\tau_{\mathrm{ff}}^2}
230: ( 3 \Gamma_1 - 4 )
231: & > & 0 \label{ZSDynSta} \\
232: \frac{\pi^2}{\tau_{\mathrm{co}}
233: \tau_{\mathrm{ff}}^2}
234: \Gamma_1 \nabla_{\mathrm{ad}}
235: \left[ \frac{ 1- 3/4 \chi^{}_\rho }{ \chi^{}_T }
236: ( \kappa^{}_T - 4 )
237: + \kappa^{}_P + 1
238: \right]
239: & > & 0 \label{ZSSecSta} \\
240: \frac{\pi^2}{4} \frac{3}{\tau_{ \mathrm{co} }
241: \tau_{ \mathrm{ff} }^2
242: }
243: \Gamma_1^2 \, \nabla_{\mathrm{ad}} \left[
244: 4 \nabla_{\mathrm{ad}}
245: - ( \nabla_{\mathrm{ad}} \kappa^{}_T
246: + \kappa^{}_P
247: )
248: - \frac{4}{3 \Gamma_1}
249: \right]
250: & > & 0 \label{ZSVibSta}
251: \end{eqnarray}
252: %
253: For a physical discussion of the stability criteria see Baker
254: (\cite{baker}) or Cox (\cite{cox}).
255:
256: We observe that these criteria for dynamical, secular and
257: vibrational stability, respectively, can be factorized into
258: \begin{enumerate}
259: \item a factor containing local timescales only,
260: \item a factor containing only constitutive relations and
261: their derivatives.
262: \end{enumerate}
263: The first factors, depending on only timescales, are positive
264: by definition. The signs of the left hand sides of the
265: inequalities~(\ref{ZSDynSta}), (\ref{ZSSecSta}) and (\ref{ZSVibSta})
266: therefore depend exclusively on the second factors containing
267: the constitutive relations. Since they depend only
268: on state variables, the stability criteria themselves are \emph{
269: functions of the thermodynamic state in the local zone}. The
270: one-zone stability can therefore be determined
271: from a simple equation of state, given for example, as a function
272: of density and
273: temperature. Once the microphysics, i.e.\ the thermodynamics
274: and opacities (see Table~\ref{KapSou}), are specified (in practice
275: by specifying a chemical composition) the one-zone stability can
276: be inferred if the thermodynamic state is specified.
277: The zone -- or in
278: other words the layer -- will be stable or unstable in
279: whatever object it is imbedded as long as it satisfies the
280: one-zone-model assumptions. Only the specific growth rates
281: (depending upon the time scales) will be different for layers
282: in different objects.
283:
284: %__________________________________________________ One column table
285: \begin{table}
286: \caption[]{Opacity sources.}
287: \label{KapSou}
288: $$
289: \begin{array}{p{0.5\linewidth}l}
290: \hline
291: \noalign{\smallskip}
292: Source & T / {[\mathrm{K}]} \\
293: \noalign{\smallskip}
294: \hline
295: \noalign{\smallskip}
296: Yorke 1979, Yorke 1980a & \leq 1700^{\mathrm{a}} \\
297: % Yorke 1979, Yorke 1980a & \leq 1700 \\
298: Kr\"ugel 1971 & 1700 \leq T \leq 5000 \\
299: Cox \& Stewart 1969 & 5000 \leq \\
300: \noalign{\smallskip}
301: \hline
302: \end{array}
303: $$
304: \begin{list}{}{}
305: \item[$^{\mathrm{a}}$] This is footnote a
306: \end{list}
307: \end{table}
308: %
309: We will now write down the sign (and therefore stability)
310: determining parts of the left-hand sides of the inequalities
311: (\ref{ZSDynSta}), (\ref{ZSSecSta}) and (\ref{ZSVibSta}) and thereby
312: obtain \emph{stability equations of state}.
313:
314: The sign determining part of inequality~(\ref{ZSDynSta}) is
315: $3\Gamma_1 - 4$ and it reduces to the
316: criterion for dynamical stability
317: \begin{equation}
318: \Gamma_1 > \frac{4}{3}\,\cdot
319: \end{equation}
320: Stability of the thermodynamical equilibrium demands
321: \begin{equation}
322: \chi^{}_\rho > 0, \;\; c_v > 0\, ,
323: \end{equation}
324: and
325: \begin{equation}
326: \chi^{}_T > 0
327: \end{equation}
328: holds for a wide range of physical situations.
329: With
330: \begin{eqnarray}
331: \Gamma_3 - 1 = \frac{P}{\rho T} \frac{\chi^{}_T}{c_v}&>&0\\
332: \Gamma_1 = \chi_\rho^{} + \chi_T^{} (\Gamma_3 -1)&>&0\\
333: \nabla_{\mathrm{ad}} = \frac{\Gamma_3 - 1}{\Gamma_1} &>&0
334: \end{eqnarray}
335: we find the sign determining terms in inequalities~(\ref{ZSSecSta})
336: and (\ref{ZSVibSta}) respectively and obtain the following form
337: of the criteria for dynamical, secular and vibrational
338: \emph{stability}, respectively:
339: \begin{eqnarray}
340: 3 \Gamma_1 - 4 =: S_{\mathrm{dyn}} > & 0 & \label{DynSta} \\
341: %
342: \frac{ 1- 3/4 \chi^{}_\rho }{ \chi^{}_T } ( \kappa^{}_T - 4 )
343: + \kappa^{}_P + 1 =: S_{\mathrm{sec}} > & 0 & \label{SecSta} \\
344: %
345: 4 \nabla_{\mathrm{ad}} - (\nabla_{\mathrm{ad}} \kappa^{}_T
346: + \kappa^{}_P)
347: - \frac{4}{3 \Gamma_1} =: S_{\mathrm{vib}}
348: > & 0\,.& \label{VibSta}
349: \end{eqnarray}
350: The constitutive relations are to be evaluated for the
351: unperturbed thermodynamic state (say $(\rho_0, T_0)$) of the zone.
352: We see that the one-zone stability of the layer depends only on
353: the constitutive relations $\Gamma_1$,
354: $\nabla_{\mathrm{ad}}$, $\chi_T^{},\,\chi_\rho^{}$,
355: $\kappa_P^{},\,\kappa_T^{}$.
356: These depend only on the unperturbed
357: thermodynamical state of the layer. Therefore the above relations
358: define the one-zone-stability equations of state
359: $S_{\mathrm{dyn}},\,S_{\mathrm{sec}}$
360: and $S_{\mathrm{vib}}$. See Fig.~\ref{FigVibStab} for a picture of
361: $S_{\mathrm{vib}}$. Regions of secular instability are
362: listed in Table~1.
363:
364: %
365: % One column figure
366: %----------------------------------------------------------- S_vib
367: \begin{figure}
368: \centering
369: %%%\includegraphics[width=3cm]{empty.eps}
370: \caption{Vibrational stability equation of state
371: $S_{\mathrm{vib}}(\lg e, \lg \rho)$.
372: $>0$ means vibrational stability.
373: }
374: \label{FigVibStab}
375: \end{figure}
376: %
377: %______________________________________________________________
378:
379: \section{Conclusions}
380:
381: \begin{enumerate}
382: \item The conditions for the stability of static, radiative
383: layers in gas spheres, as described by Baker's (\cite{baker})
384: standard one-zone model, can be expressed as stability
385: equations of state. These stability equations of state depend
386: only on the local thermodynamic state of the layer.
387: \item If the constitutive relations -- equations of state and
388: Rosseland mean opacities -- are specified, the stability
389: equations of state can be evaluated without specifying
390: properties of the layer.
391: \item For solar composition gas the $\kappa$-mechanism is
392: working in the regions of the ice and dust features
393: in the opacities, the $\mathrm{H}_2$ dissociation and the
394: combined H, first He ionization zone, as
395: indicated by vibrational instability. These regions
396: of instability are much larger in extent and degree of
397: instability than the second He ionization zone
398: that drives the Cephe{\"\i}d pulsations.
399: \end{enumerate}
400:
401: \begin{acknowledgements}
402: Part of this work was supported by the German
403: \emph{Deut\-sche For\-schungs\-ge\-mein\-schaft, DFG\/} project
404: number Ts~17/2--1.
405: \end{acknowledgements}
406:
407: \begin{thebibliography}{}
408:
409: \bibitem[1966]{baker} Baker, N. 1966,
410: in Stellar Evolution,
411: ed.\ R. F. Stein,\& A. G. W. Cameron
412: (Plenum, New York) 333
413:
414: \bibitem[1988]{balluch} Balluch, M. 1988,
415: A\&A, 200, 58
416:
417: \bibitem[1980]{cox} Cox, J. P. 1980,
418: Theory of Stellar Pulsation
419: (Princeton University Press, Princeton) 165
420:
421: \bibitem[1969]{cox69} Cox, A. N.,\& Stewart, J. N. 1969,
422: Academia Nauk, Scientific Information 15, 1
423:
424: \bibitem[1980]{mizuno} Mizuno H. 1980,
425: Prog. Theor. Phys., 64, 544
426:
427: \bibitem[1987]{tscharnuter} Tscharnuter W. M. 1987,
428: A\&A, 188, 55
429:
430: \bibitem[1992]{terlevich} Terlevich, R. 1992, in ASP Conf. Ser. 31,
431: Relationships between Active Galactic Nuclei and Starburst Galaxies,
432: ed. A. V. Filippenko, 13
433:
434: \bibitem[1980a]{yorke80a} Yorke, H. W. 1980a,
435: A\&A, 86, 286
436:
437: \bibitem[1997]{zheng} Zheng, W., Davidsen, A. F., Tytler, D. \& Kriss, G. A.
438: 1997, preprint
439: \end{thebibliography}
440:
441: \end{document}
442:
443: %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
444: Examples for figures using graphicx
445: A guide "Using Imported Graphics in LaTeX2e" (Keith Reckdahl)
446: is available on a lot of LaTeX public servers or ctan mirrors.
447: The file is : epslatex.pdf
448: %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
449:
450: %_____________________________________________________________
451: % A figure as large as the width of the column
452: %-------------------------------------------------------------
453: \begin{figure}
454: \centering
455: \includegraphics[width=\textwidth]{empty.eps}
456: \caption{Vibrational stability equation of state
457: $S_{\mathrm{vib}}(\lg e, \lg \rho)$.
458: $>0$ means vibrational stability.
459: }
460: \label{FigVibStab}
461: \end{figure}
462: %
463: %_____________________________________________________________
464: % One column rotated figure
465: %-------------------------------------------------------------
466: \begin{figure}
467: \centering
468: \includegraphics[angle=-90,width=3cm]{empty.eps}
469: \caption{Vibrational stability equation of state
470: $S_{\mathrm{vib}}(\lg e, \lg \rho)$.
471: $>0$ means vibrational stability.
472: }
473: \label{FigVibStab}
474: \end{figure}
475: %
476: %_____________________________________________________________
477: % Figure with caption on the right side
478: %-------------------------------------------------------------
479: \begin{figure}
480: \centering
481: \includegraphics[width=3cm]{empty.eps}
482: \caption{Vibrational stability equation of state
483: $S_{\mathrm{vib}}(\lg e, \lg \rho)$.
484: $>0$ means vibrational stability.
485: }
486: \label{FigVibStab}
487: \end{figure}
488: %
489: %_____________________________________________________________
490: %
491: %_____________________________________________________________
492: % Figure with a new BoundingBox
493: %-------------------------------------------------------------
494: \begin{figure}
495: \centering
496: \includegraphics[bb=10 20 100 300,width=3cm,clip]{empty.eps}
497: \caption{Vibrational stability equation of state
498: $S_{\mathrm{vib}}(\lg e, \lg \rho)$.
499: $>0$ means vibrational stability.
500: }
501: \label{FigVibStab}
502: \end{figure}
503: %
504: %_____________________________________________________________
505: %
506: %_____________________________________________________________
507: % The "resizebox" command
508: %-------------------------------------------------------------
509: \begin{figure}
510: \resizebox{\textwidth}{!}
511: {\includegraphics[bb=10 20 100 300,clip]{empty.eps}
512: \caption{Vibrational stability equation of state
513: $S_{\mathrm{vib}}(\lg e, \lg \rho)$.
514: $>0$ means vibrational stability.
515: }
516: \label{FigVibStab}
517: \end{figure}
518: %
519: %______________________________________________________________
520: %
521: %_____________________________________________________________
522: % Simple A&A Table
523: %_____________________________________________________________
524: %
525: \begin{table}
526: \caption{Nonlinear Model Results} % title of Table
527: \label{table:1} % is used to refer this table in the text
528: \centering % used for centering table
529: \begin{tabular}{c c c c} % centered columns (4 columns)
530: \hline\hline % inserts double horizontal lines
531: HJD & $E$ & Method\#2 & Method\#3 \\ % table heading
532: \hline % inserts single horizontal line
533: 1 & 50 & $-837$ & 970 \\ % inserting body of the table
534: 2 & 47 & 877 & 230 \\
535: 3 & 31 & 25 & 415 \\
536: 4 & 35 & 144 & 2356 \\
537: 5 & 45 & 300 & 556 \\
538: \hline %inserts single line
539: \end{tabular}
540: \end{table}
541: %
542: %_____________________________________________________________
543: % Two column Table
544: %_____________________________________________________________
545: %
546: \begin{table*}
547: \caption{Nonlinear Model Results}
548: \label{table:1}
549: \centering
550: \begin{tabular}{c c c c l l l } % 7 columns
551: \hline\hline
552: % To combine 4 columns into a single one
553: HJD & $E$ & Method\#2 & \multicolumn{4}{c}{Method\#3}\\
554: \hline
555: 1 & 50 & $-837$ & 970 & 65 & 67 & 78\\
556: 2 & 47 & 877 & 230 & 567& 55 & 78\\
557: 3 & 31 & 25 & 415 & 567& 55 & 78\\
558: 4 & 35 & 144 & 2356& 567& 55 & 78 \\
559: 5 & 45 & 300 & 556 & 567& 55 & 78\\
560: \hline
561: \end{tabular}
562: \end{table*}
563: %
564: %_____________________________________________________________
565: % Table with foonotes
566: %-------------------------------------------------------------
567: %
568: \begin{table}
569: \begin{minipage}[t]{\columnwidth}
570: \caption{LHNW source catalogue.}
571: \label{catalog}
572: \centering
573: \renewcommand{\footnoterule}{} % to avoid a line before footnotes
574: \begin{tabular}{lccccc}
575: \hline \hline
576: ID& RA & Dec & {\it S/N} & Flux \\
577: ~ &(J2000) & (J2000) &~ & [{\rm mJy}] \\
578: \hline
579: LHJ10 &10:32:02.4 & +58:80:09 & 8 & 97 $\pm$ 15\\
580: LHJ10 &10:33:08.8 & +58:80:30 & 5 & 80 $\pm$ 16\\
581: LHJ10 &10:34:45.1 & +57:47:33\footnote{Text of the footnote}
582: & 5 & 48 $\pm$ 10\\
583: LHJ10 &10:32:49.7 & +57:37:19 & 5 & 56 $\pm$ 11\\
584: LHJ10 &10:33:52.1 & +58:40:30\footnote{Text of the footnote}
585: & 4 & 55 $\pm$ 14\\
586: LHJ10 &10:33:04.3 & +57:36:37 & 4 & 55 $\pm$ 14\\
587: LHJ10 &10:35:50.4 & +57:30:05 & 4 & 49 $\pm$ 11\\
588: \hline
589: \end{tabular}
590: \end{minipage}
591: \end{table}
592: %
593: %_____________________________________________________________
594: % A rotated Table in landscape
595: % In the preamble, use: \usepackage{lscape}
596: %-------------------------------------------------------------
597: \begin{landscape}
598: \begin{table*}
599: \caption{Summary for ISOCAM sources with mid-IR excess
600: (YSO candidates).}\label{YSOtable}
601: \centering
602: \begin{tabular}{crrlcl}
603: \hline\hline
604: ISO-L1551 & $F_{6.7}$~[mJy] & $\alpha_{6.7-14.3}$
605: & YSO type$^{d}$ & Status & Comments\\
606: \hline
607: \multicolumn{6}{c}{\it New YSO candidates}\\ % To combine 6 columns into a single one
608: \hline
609: 1 & 1.56 $\pm$ 0.47 & -- & Class II$^{c}$ & New & Mid\\
610: 2 & 0.79: & 0.97: & Class II ? & New & \\
611: 3 & 4.95 $\pm$ 0.68 & 3.18 & Class II / III & New & \\
612: 5 & 1.44 $\pm$ 0.33 & 1.88 & Class II & New & \\
613: \hline
614: \multicolumn{6}{c}{\it Previously known YSOs} \\
615: \hline
616: 61 & 0.89 $\pm$ 0.58 & 1.77 & Class I & \object{HH 30} & Circumstellar disk\\
617: 96 & 38.34 $\pm$ 0.71 & 37.5& Class II& MHO 5 & Spectral type\\
618: \hline
619: \end{tabular}
620: \end{table*}
621: \end{landscape}
622: %
623: %_____________________________________________________________
624: % Table longer than a single page
625: % In the preamble, use: \usepackage{longtable}
626: %-------------------------------------------------------------
627: % All long tables have to be placed at the end, after
628: % \end{thebibliography}
629: %
630: % In the text, at the place where the large table should appear
631: % add the command:
632: \addtocounter{table}{1}
633: % Tables counters will be well numbered.
634: %
635: \end{thebibliography}
636: % If table 2
637: \longtab{2}{
638: \begin{longtable}{lllrrr}
639: \caption{\label{kstars} Sample stars with absolute magnitude}\\
640: \hline\hline
641: Catalogue& $M_{V}$ & Spectral & Distance & Mode & Count Rate \\
642: \hline
643: \endfirsthead
644: \caption{continued.}\\
645: \hline\hline
646: Catalogue& $M_{V}$ & Spectral & Distance & Mode & Count Rate \\
647: \hline
648: \endhead
649: \hline
650: \endfoot
651: %%
652: Gl 33 & 6.37 & K2 V & 7.46 & S & 0.043170\\
653: Gl 66AB & 6.26 & K2 V & 8.15 & S & 0.260478\\
654: Gl 68 & 5.87 & K1 V & 7.47 & P & 0.026610\\
655: & & & & H & 0.008686\\
656: Gl 86
657: \footnote{Source not included in the HRI catalog. See Sect.~5.4.2 for details.}
658: & 5.92 & K0 V & 10.91& S & 0.058230\\
659: \end{longtable}
660: }% End \longtab
661: %
662: %_____________________________________________________________
663: % Table longer than a single page
664: % and in landscape
665: % In the preamble, use: \usepackage{longtable,lscape}
666: %-------------------------------------------------------------
667: % All long tables have to be placed at the end, after
668: % \end{thebibliography}
669: %
670: % In the text, at the place where the large table should appear
671: % add the command:
672: \addtocounter{table}{1}
673: % Tables counters will be well numbered.
674: %
675: \end{thebibliography}
676: % If table 2
677: \longtabL{2}{
678: \begin{landscape}
679: \begin{longtable}{lllrrr}
680: \caption{\label{kstars} Sample stars with absolute magnitude}\\
681: \hline\hline
682: Catalogue& $M_{V}$ & Spectral & Distance & Mode & Count Rate \\
683: \hline
684: \endfirsthead
685: \caption{continued.}\\
686: \hline\hline
687: Catalogue& $M_{V}$ & Spectral & Distance & Mode & Count Rate \\
688: \hline
689: \endhead
690: \hline
691: \endfoot
692: %%
693: Gl 33 & 6.37 & K2 V & 7.46 & S & 0.043170\\
694: Gl 66AB & 6.26 & K2 V & 8.15 & S & 0.260478\\
695: Gl 68 & 5.87 & K1 V & 7.47 & P & 0.026610\\
696: & & & & H & 0.008686\\
697: Gl 86
698: \footnote{Source not included in the HRI catalog. See Sect.~5.4.2 for details.}
699: & 5.92 & K0 V & 10.91& S & 0.058230\\
700: \end{longtable}
701: \end{landscape}
702: }% End \longtabL
703: %
704: % Online Material
705: %_____________________________________________________________
706: % Online appendices have to be placed at the end, after
707: % \end{thebibliography}
708: %-------------------------------------------------------------
709: \end{thebibliography}
710:
711: \Online
712:
713: \begin{appendix} %First online appendix
714: \section{Background galaxy number counts and shear noise-levels}
715: Because the optical images used in this analysis...
716:
717: \begin{figure*}
718: \centering
719: \includegraphics[width=16.4cm,clip]{1787f24.ps}
720: \caption{Plotted above...}
721: \label{appfig}
722: \end{figure*}
723:
724: Because the optical images...
725: \end{appendix}
726:
727: \begin{appendix} %Second online appendix
728: These studies, however, have faced...
729: \end{appendix}
730:
731: \end{document}
732: %
733: %_____________________________________________________________
734: % Some tables or figures are in the printed version and
735: % some are only in the electronic version
736: %-------------------------------------------------------------
737: %
738: % Leave all the tables or figures in the text, at their right place
739: % and use the commands \onlfig{}{} and \onltab{}{}. These elements
740: % will be automatically placed at the end, in the section
741: % Online material.
742:
743: \documentclass{aa}
744: ...
745: \begin{document}
746: text of the paper...
747: \begin{figure*}%f1
748: \includegraphics[width=10.9cm]{1787f01.eps}
749: \caption{Shown in greyscale is a...}
750: \label{cl12301}}
751: \end{figure*}
752: ...
753: from the intrinsic ellipticity distribution.
754: % Figure 2 available electronically only
755: \onlfig{2}{
756: \begin{figure*}%f2
757: \includegraphics[width=11.6cm]{1787f02.eps}
758: \caption {Shown in greyscale...}
759: \label{cl1018}
760: \end{figure*}
761: }
762:
763: % Figure 3 available electronically only
764: \onlfig{3}{
765: \begin{figure*}%f3
766: \includegraphics[width=11.2cm]{1787f03.eps}
767: \caption{Shown in panels...}
768: \label{cl1059}
769: \end{figure*}
770: }
771:
772: \begin{figure*}%f4
773: \includegraphics[width=10.9cm]{1787f04.eps}
774: \caption{Shown in greyscale is...}
775: \label{cl1232}}
776: \end{figure*}
777:
778: \begin{table}%t1
779: \caption{Complexes characterisation.}\label{starbursts}
780: \centering
781: \begin{tabular}{lccc}
782: \hline \hline
783: Complex & $F_{60}$ & 8.6 & No. of \\
784: ...
785: \hline
786: \end{tabular}
787: \end{table}
788: The second method produces...
789:
790: % Figure 5 available electronically only
791: \onlfig{5}{
792: \begin{figure*}%f5
793: \includegraphics[width=11.2cm]{1787f05.eps}
794: \caption{Shown in panels...}
795: \label{cl1238}}
796: \end{figure*}
797: }
798:
799: As can be seen, in general the deeper...
800: % Table 2 available electronically only
801: \onltab{2}{
802: \begin{table*}%t2
803: \caption{List of the LMC stellar complexes...}\label{Properties}
804: \centering
805: \begin{tabular}{lccccccccc}
806: \hline \hline
807: Stellar & RA & Dec & ...
808: ...
809: \hline
810: \end{tabular}
811: \end{table*}
812: }
813:
814: % Table 3 available electronically only
815: \onltab{3}{
816: \begin{table*}%t3
817: \caption{List of the derived...}\label{IrasFluxes}
818: \centering
819: \begin{tabular}{lcccccccccc}
820: \hline \hline
821: Stellar & $f12$ & $L12$ &...
822: ...
823: \hline
824: \end{tabular}
825: \end{table*}
826: }
827: %
828: %-------------------------------------------------------------
829: % For the online material, table longer than a single page
830: % In the preamble, use: \usepackage{longtable}
831: % or for landscape option: \usepackage{longtable,lscape}
832: %-------------------------------------------------------------
833: \documentclass{aa}
834: \usepackage[varg]{txfonts}
835: \usepackage{graphicx}
836: \usepackage{longtable}
837:
838: \begin{document}
839: text of the paper
840: % Table will be print automatically at the end, in the section Online material.
841: \onllongtab{3}{
842: \begin{longtable}{lrcrrrrrrrrl}
843: \caption{Line data and abundances ...}\\
844: \hline
845: \hline
846: Def & mol & Ion & $\lambda$ & $\chi$ & $\log gf$ & N & e & rad & $\delta$ & $\delta$
847: red & References \\
848: \hline
849: \endfirsthead
850: \caption{Continued.} \\
851: \hline
852: Def & mol & Ion & $\lambda$ & $\chi$ & $\log gf$ & B & C & rad & $\delta$ & $\delta$
853: red & References \\
854: \hline
855: \endhead
856: \hline
857: \endfoot
858: \hline
859: \endlastfoot
860: A & CH & 1 &3638 & 0.002 & $-$2.551 & & & & $-$150 & 150 & Jorgensen et al. (1996) \\
861: \end{longtable}
862: }% End onllongtab
863:
864: % Or for landscape, large table:
865:
866: \onllongtabL{3}{
867: \begin{landscape}
868: \begin{longtable}{lrcrrrrrrrrl}
869: ...
870: \end{longtable}
871: \end{landscape}
872: }% End onllongtabL
873: