1: %%
2: %% Beginning of file 'sample.tex'
3:
4: %% This is a sample manuscript marked up using the
5: %% AASTeX v5.0 LaTeX 2e macros.
6:
7: %% The first piece of markup in an AASTeX v5.0 document
8: %% is the \documentclass command. LaTeX will ignore
9: %% any data that comes before this command.
10:
11: %% The command below calls the default manuscript style,
12: %% which will produce a double-spaced document on one column.
13: %% Examples of commands for other substyles follow. Use
14: %% whichever is most appropriate for your purposes.
15:
16: %%\documentclass{aastex}
17: %% preprint produces a one-column, single-spaced document:
18:
19: %
20: \documentclass[12pt,preprint]{aastex}
21:
22: %% preprint2 produces a double-column, single-spaced document:
23:
24: %\documentclass[preprint2]{aastex}
25:
26: %% If you want to create your own macros, you can do so
27: %% using \newcommand. Your macros should appear before
28: %% the \begin{document} command.
29: %%
30: %% If you are submitting to a journal that translates manuscripts
31: %% into SGML, you need to follow certain guidelines when preparing
32: %% your macros. See the AASTeX v5.0 Author Guide
33: %% for information.
34:
35: \newcommand{\vdag}{(v)^\dagger}
36: \newcommand{\myemail}{skywalker@galaxy.far.far.away}
37:
38: %% You can insert a short comment on the title page using the command below.
39:
40: %\slugcomment{Submitted to ApJ Lett.}
41: \def\etal{{\it et al.~}}
42: \def\ds{\displaystyle}
43: %% If you wish, you may supply running head information, although
44: %% this information may be modified by the editorial offices.
45: %% The left head contains a list of authors,
46: %% usually a maximum of three (otherwise use et al.). The right
47: %% head is a modified title of up to roughly 44 characters. Running heads
48: %% will not print in the manuscript style.
49:
50: \shorttitle{Observations of Molecular Lines toward G28.20-0.04N}
51: \shortauthors{Qin et al.}
52:
53:
54: %% This is the end of the preamble. Indicate the beginning of the
55: %% paper itself with \begin{document}.
56:
57: \begin{document}
58:
59: %% LaTeX will automatically break titles if they run longer than
60: %% one line. However, you may use \\ to force a line break if
61: %% you desire.
62:
63: \title{HIGH-RESOLUTION OBSERVATIONS OF MOLECULAR LINES TOWARD THE HOT CORE
64: G28.20-0.04N }
65:
66: %% Use \author, \affil, and the \and command to format
67: %% author and affiliation information.
68: %% Note that \email has replaced the old \authoremail command
69: %% from AASTeX v4.0. You can use \email to mark an email address
70: %% anywhere in the paper, not just in the front matter.
71: %% As in the title, you can use \\ to force line breaks.
72:
73: \author{Sheng-Li Qin\altaffilmark{1}, Maohai Huang\altaffilmark{1},
74: Yuefang Wu\altaffilmark{2}, Rui Xue\altaffilmark{1}, Sheng
75: Chen\altaffilmark{1}}
76:
77: \altaffiltext{1}{National Astronomical Observatories, Chinese
78: Academy of Sciences, Beijing, 100012, China; slqin@bao.ac.cn,
79: mhuang@bao.ac.cn, jerryxue@gmail.com, schen@bao.ac.cn.}
80:
81: \altaffiltext{2}{Department of Astronomy, Peking University,
82: Beijing, 100871, China; yfwu@vega.bac.pku.edu.cn.}
83:
84:
85:
86: %% Mark off your abstract in the ``abstract'' environment. In the manuscript
87: %% style, abstract will output a Received/Accepted line after the
88: %% title and affiliation information. No date will appear since the author
89: %% does not have this information. The dates will be filled in by the
90: %% editorial office after submission.
91:
92: \begin{abstract}
93: We present the results from arcsecond resolution observations of
94: various line transitions at 1.3 mm toward hypercompact HII region
95: G28.20-0.04N. With the SMA data, we have detected and mapped the
96: transitions in the CH$_{3}$CN, CO, $^{13}$CO, SO$_{2}$, OCS, and
97: CH$_{3}$OH molecular lines as well as the radio recombination line
98: H30$\alpha$. The observations and analysis indicate a hot core
99: associated with G28.20-0.04N. The outflow and possible rotation
100: are detected in this region.
101:
102:
103: \end{abstract}
104:
105: %% Keywords should appear after the \end{abstract} command. The uncommented
106: %% example has been keyed in ApJ style. See the instructions to authors
107: %% for the journal to which you are submitting your paper to determine
108: %% what keyword punctuation is appropriate.
109:
110: \keywords{HII regions --- ISM:individual (G28.20-0.04N) ---
111: ISM:kinematics and dynamics --- ISM:molecules --- radio lines: ISM
112: --- star:formation}
113:
114:
115: %% From the front matter, we move on to the body of the paper.
116: %% In the first two sections, notice the use of the natbib \citep
117: %% and \citet commands to identify citations. The citations are
118: %% tied to the reference list via symbolic KEYs. The KEY corresponds
119: %% to the KEY in the \bibitem in the reference list below. We have
120: %% chosen the first three characters of the first author's name plus
121: %% the last two numeral of the year of publication as our KEY for
122: %% each reference.
123:
124: \section{INTRODUCTION}
125: The scenario of massive star formation remains unclear and has
126: been observationally challenging because of large distances,
127: clustered formation environments, and shorter evolutionary
128: timescales of massive stars. Ultracompact HII (UCHII) regions are
129: considered signposts of massive star formation, but do not
130: represent the earliest stage of massive star forming process
131: (e.g., Churchwell 2002). Hot molecular cores are defined as
132: compact ($\leq$ 0.1 pc), dense ($\geq 10^7$ cm$^{-3}$) and warm
133: ($\geq$ 100 K) molecular cloud cores (Kurtz et al. 2000). The
134: observations from various wavelengths have suggested that hot
135: cores are the sites for massive star formation, and that they
136: represent the early phase of the evolution prior to UCHII regions
137: (Kurtz et al. 2000; Gibb et al. 2000, 2004; Churchwell 2002). So
138: far only twenty or so hot cores from high-resolution observations
139: have been reported in the literature. The observations of hot
140: cores are important for understanding the evolutionary sequence
141: and physical conditions of massive star formation. Hypercompact
142: HII (HCHII) regions have smaller sizes and higher densities
143: compared with UCHII regions, and they probably correspond to a
144: transition phase from hot cores to UCHII regions.
145:
146: The HCHII region G28.20-0.04N at a distance of 5.7 kpc has been
147: observed at radio and millimeter wavelengths (Fish et al. 2003;
148: Sollins et al. 2005; Sewilo et al. 2004, 2008; Keto et al. 2008).
149: Masers, rotation, inflow, and outflow in G28.20-0.04N have been
150: revealed from observations of molecular and radio recombination
151: lines at centimeter wavelengths (Argon et al. 2000; Menten 1991;
152: Sollins et al. 2005; Sewilo et al. 2008). However, the star
153: formation environment and physical conditions of the hot core in
154: this region are still poorly understood.
155:
156: Due to the compact and dense nature of hot cores, high angular
157: resolution observations using molecular lines with high critical
158: densities and excitation temperatures at (sub)millimeter
159: wavelengths are crucial to uncovering the physical conditions and
160: kinematics in G28.24-0.04N. In this letter, we present the
161: Submillimeter Array (SMA) \footnote {The Submillimeter Array is a
162: joint project between the Smithsonian Astrophysical Observatory
163: and the Academia Sinica Institute of Astronomy and Astrophysics
164: and is funded by the Smithsonian Institution and the Academia
165: Sinica.} observations of molecular lines at 1.3 mm toward the hot
166: core in G28.24-0.04N.
167:
168:
169: \section{DATA}
170: The data are from SMA archive. Observations toward G28.20-0.04N
171: were carried out with the SMA in September 2005, at 220 GHz (lower
172: sideband) and 230 GHz (upper sideband) with a frequency resolution
173: of 0.4125 MHz and an angular resolution of 1$^{\prime\prime}$. The
174: mean system temperature was 100 K. In the database, QSO 3c454.3
175: and Uranus were observed for bandpass and flux-density
176: calibrations. QSOs 1743-038 and 1911-201 were also observed for
177: the antenna-based gain corrections. The calibration and imaging
178: were done in Miriad\footnote
179: {http://sma-www.cfa.harvard.edu/miriadWWW}. Multiple lines were
180: detected in both sidebands. Using the task UVLIN in Miriad, the
181: continuum level was determined by a linear fitting to the
182: line-free channels. Then, the calibrated (u, v) data were
183: separated for two output (u, v) data sets: the continuum and the
184: continuum-subtracted spectral lines. In order to improve
185: sensitivity, we smoothed the H30$\alpha$, CO and $^{13}$CO lines
186: to 2 km~s$^{-1}$ velocity resolution, and smoothed rest of the
187: lines to 1 km~s$^{-1}$ velocity resolution. Self-calibration was
188: performed to the continuum data. The gain solutions from the
189: continuum were applied to the line data. The synthesized beam size
190: of the continuum and line images with robust weighting was
191: approximately 1.3$^{\prime\prime}\times 0.8^{\prime\prime}$
192: (P.A.=$-89.6^{\circ}$).
193:
194: \section{RESULTS}
195:
196: The molecular lines were identified using the CDMS and JPL
197: databases (M\"{u}ller et al. 2005; Pickett et al. 1998), and the
198: data by Sutton et al. (1985) \& Nummelin et al. (1998). The
199: molecular lines CH$_{3}$CN, CO, $^{13}$CO, SO$_{2}$, OCS,
200: CH$_{3}$OH, and the radio recombination line H30$\alpha$ were
201: detected and identified from the lower and upper sidebands of the
202: SMA observations. Table 1 lists the parameters of the detected
203: molecular transitions.
204:
205: Combining the lower and upper sideband data, we made continuum
206: image from line-free channels at 1.3 mm, as shown in Fig. 1(a).
207: The rms (1 $\sigma$) noise level is 0.003 Jy beam$^{-1}$. The
208: observations show an unresolved core peaked at
209: R.A.(J2000.0)=18$^{\rm h}$42$^{\rm m}$58.120$^{\rm s}$ ($\Delta
210: {\rm R.A.}=\pm 0.02^{\prime\prime}$),
211: decl.(J2000.0)=$-4^{\circ}$13$^{\prime}$57.40$^{\prime\prime}$
212: ($\Delta {\rm decl.}=\pm 0.02^{\prime\prime}$) with a peak
213: intensity of 0.67$\pm$0.02 Jy beam$^{-1}$. The total flux density
214: and deconvolved source size from Gaussian fit are approximately
215: 0.89$\pm$0.03 Jy and 0.6$^{\prime\prime}\times0.2^{\prime\prime}
216: ({\rm P.A.}=-10.1^{\circ})$, respectively. The thick contours in
217: Fig. 1(a) are the integrated intensity map of the radio
218: recombination line H30$\alpha$. The SMA observations show that the
219: peak position of the continuum is consistent (within
220: $0.03^{\prime\prime}$) with that of the H30$\alpha$ line image in
221: G28.24-0.04N. Most likely the continuum emission in this
222: observation comes from free-free emission (see Fig. 10 of Keto et
223: al. 2008).
224:
225: The line images were constructed from the maps of the
226: continuum-subtracted spectral channels. Figure 1(b) shows the
227: integrated intensity contours of the CH$_{3}$CN (12$_{2}-11_{2}$)
228: transition. The major axis of the line image is approximately
229: 1.4$^{\prime\prime}$, corresponding to a projected linear size of
230: $<$0.04 pc. In order to avoid the cancellation of the integrated
231: intensities of the emission (positive values) and absorption
232: (negative values) in the overlapping region along the
233: line-of-sight, the emission and absorption in the CO and $^{13}$CO
234: were handled separately for the integrated intensity maps, as done
235: by Qin et al. (2008). Figure 1(c) presents the integrated
236: intensity map of the $^{13}$CO. The absorption against the
237: continuum and the emission were observed as shown in Fig. 1(c). No
238: absorption was evident in the H30$\alpha$ and CH$_{3}$CN lines.
239: Away from the continuum, the absorption was not observed. Figure 2
240: presents the spectra of the molecular line transitions. The
241: spectra were extracted from the channel maps at the peak positions
242: of the line images. In Fig. 2, the emission spectra have similar
243: profiles, showing single emission peak with similar line center
244: velocity and line width. Gaussian fits were performed on all the
245: spectra. The peak intensity ($I_{p}$), full width at half maximum
246: ($\Delta V$), and central line velocity ($V_{LSR}$) from the
247: Gaussian fits are summarized in Table 1. The radial velocities
248: range from 95 to 96 km~s$^{-1}$ (except for $^{13}$CO, CO and
249: H30$\alpha$ lines). Compared with the SO$_{2}$, OCS, CH$_{3}$OH
250: and CH$_{3}$CN, the $^{13}$CO line with lower excitation
251: temperature shows both absorption and emission components.
252: Absorption can be observed if the excitation temperature of gas in
253: front of the background continuum is lower than the brightness
254: temperature of the continuum. Absorption is also observed in the
255: CO line.
256:
257: \section {DISCUSSIONS}
258: \subsection{\emph{Hot Core}}
259: Methyl cyanide (CH$_{3}$CN) has been proved as an ideal probe to
260: determine the kinetic temperature and column density of molecular
261: gas (e.g., Remijan et al. 2004). Seven K-components of the
262: CH$_3$CN ($J=12-11$) transition were detected by the SMA
263: observations. From the integrated intensities, in the limits of
264: optically thin and local thermodynamic equilibrium (LTE), the
265: rotation temperature and column density are estimated using a
266: rotation temperature diagram (Goldsmith \& Langer 1999; Liu et al.
267: 2002). Figure 3 shows the rotation temperature diagram. A linear
268: least-square fit is performed toward the seven CH$_{3}$CN
269: transitions. The derived rotation temperature and beam-averaged
270: column density are 308$\pm$22 K and (1.6$\pm$0.3)$\times$10$^{16}$
271: cm$^{-2}$, respectively. In the Orion molecular cloud, the
272: CH$_{3}$CN transitions were only detected in the hot core and the
273: compact ridge, giving fractional abundances relative to H$_{2}$ of
274: 7.8$\times10^{-9}$ and 3.2$\times10^{-10}$, respectively (Blake et
275: al. 1987). Taking source size of 0.04 pc and the fractional
276: abundance in the Orion cloud, we inferred the H$_{2}$ density of
277: $>10^{7}$ cm$^{-3}$ in G28.24-0.04N. The relatively higher gas
278: temperature (308$\pm$22 K), H$_{2}$ density ($>10^{7}$ cm$^{-3}$)
279: and smaller size ($<$0.04 pc) indicate a \emph{hot core} in this
280: region.
281:
282: Following Gibb et al. (2000), we adopt $3 \times 10^{24}$
283: cm$^{-2}$ as a typical H$_2$ column density. Using this value, we
284: calculate a fractional abundance of CH$_3$CN relative to H$_2$ of
285: $5 \times 10^{-9}$. The derived abundance is close to that in the
286: Orion hot core (Blake et al. 1987). The derived rotation
287: temperature agrees (within 2$\sigma$ of the least-square fit) with
288: the value of 280 K estimated by the NH$_{3}$ lines (Soillns et al.
289: 2005). The similar gas temperatures derived from the CH$_{3}$CN
290: and NH$_{3}$ lines suggest a close relationship between the two
291: N-containing species. The gas-phase chemistry likely dominates the
292: pathways to produce CH$_{3}$CN (Rodgers \& Charnley 2001), in
293: which NH3 evaporates from grain surfaces and CH3CN is then formed
294: via gas-phase reactions at high temperatures. Based on the high
295: temperature (300 K) gas-phase chemical model (Rodgers \& Charnley
296: 2001), if NH$_{3}$ is injected for the chemical reactions, the
297: derived fractional abundance of the CH$_{3}$CN of
298: 5$\times$10$^{-9}$ corresponds to a time-scale of 1.5$\times
299: 10^{4}$ yr which is in good agreement with those
300: (1.9$\times10^{3}-5.7\times10^{4}$ yr) observed in other hot cores
301: (Kurtz et al. 2000). The CH$_{3}$CN, SO$_{2}$, OCS and CH$_{3}$OH
302: spectra have similar radial velocities and line widths, suggesting
303: that the N-bearing, O-bearing and S-bearing molecules probably
304: originated from the hot core.
305: \subsection{\emph{Kinematics}}
306: For the $^{13}$CO absorption component in Fig. 1(c), the derived
307: optical depth of the line peak is 0.57 by use of the line to
308: continuum ratio (cf. equation (1) of Qin et al. 2008). The
309: intensity of 1 Jy~beam$^{-1}$ in this observation corresponds to a
310: brightness temperature of 26 K under the Rayleigh-Jeans
311: approximation. Given the beam filling factors of the line and
312: continuum of 0.5, the upper limit of the excitation temperature in
313: the $^{13}$CO line is 35 K (cf. equation (5) of Qin et al. 2008).
314: Assuming the gas is in LTE and the emission component (with
315: integrated flux density of 9.1 Jy~beam$^{-1}$ km~s$^{-1}$) is
316: optically thin with abundances of [CO]/[$^{13}$CO]=89 and
317: [CO]/[H$_{2}$]=1$\times10^{-4}$, the H$_{2}$ column densities of
318: the absorption and emission components are $\sim$
319: 4.6$\times10^{22}$ and 6.8$\times10^{22}$ cm$^{-2}$, respectively.
320: The major axes of the absorption and emission components are
321: approximately 0.025 and 0.04 pc. The estimated H$_2$ densities and
322: masses are 5.9$\times10^{5}$ cm$^{-3}$, 1.5 M$_{\odot}$ and
323: 5.5$\times10^{5}$ cm$^{-3}$, 1.9 M$_{\odot}$ for the absorption
324: and emission components, respectively. Compared with the rotation
325: temperature and H$_{2}$ density traced by CH$_{3}$CN lines, the
326: lower excitation temperature and H$_{2}$ densities suggest that
327: the $^{13}$CO is located outside of the hot molecular core. The
328: average $V_{LSR}$ from multiple lines is an approximation of the
329: systemic velocity of the molecular cloud (Sutton et al. 1991). The
330: average $V_{LSR}$ of the emission lines (except for H30$\alpha$,
331: CO and $^{13}$CO) is 95.4$\pm$0.5 km~s$^{-1}$ (see Table 1). We
332: adopt 95.4$\pm$0.5 km~s$^{-1}$ as the systemic velocity of the
333: cloud. The spectrum in the $^{13}$CO line (see Fig. 2(j)) shows
334: that the absorption is blue-shifted and the emission is
335: red-shifted with respect to the systemic velocity, consisting of a
336: P Cygni-like profile. A NE-SW velocity gradient and broad line
337: wings in NW-SE direction have been observed in the radio
338: recombination lines (Sewilo et al. 2008). The authors proposed a
339: rotating motion responsible for the observed velocity gradient and
340: an outflow along the rotational axis in the NW-SE direction. In
341: Fig. 1(c), the peaks of the absorption and emission are aligned
342: with the rotational axis. The spectral profile along with the
343: $^{13}$CO distribution appear to indicate an outflow from the
344: molecular core, where the blue-shifted absorption (in front of the
345: continuum) is flowing toward us and the red-shifted emission
346: (behind the continuum) is moving away in the opposite direction.
347: The CO spectrum shows a complex with red-shifted emission and both
348: blue and red-shifted absorption with respect to the systemic
349: velocity (see Fig. 2(i)). The infall component in this region were
350: observed by red-shifted absorption in the NH$_{3}$ line (Sollins
351: et al. 2005). Likely the blue-shifted outflow traced by the CO
352: line in this observation is mixed with the infall. Higher spatial
353: and spectral resolution observations are needed to verify the
354: kinematics traced by the CO line.
355:
356: The position-velocity diagram across the peak of the continuum
357: along the NE-SW direction is constructed from the OCS line (see
358: Fig. 4). In Fig. 4, the velocities of the two emission peaks are
359: 95 and 97 km~s$^{-1}$ with 0.2$^{\prime\prime}$ separation,
360: respectively, indicating a velocity gradient in NE-SW direction.
361: Assuming a rotating motion along NE-SW with a rotation axis in the
362: NW-SE direction (Sewilo et al. 2008) and an equilibrium between
363: rotational and gravitational forces, the dynamical mass
364: responsible for the rotation can be estimated by $M=V^{2}\times
365: r/G$, where $V$ and $r$ are the velocity difference and spatial
366: separation of the emission peaks, respectively; $G$ is the
367: gravitational constant. The derived dynamical mass is 25
368: M$_{\odot}$, which is consistent with the mass derived by Sewilo
369: et al. (2008).
370:
371:
372:
373: \acknowledgments
374:
375: We thank the SMA staff for making the observations possible. We
376: thank the anonymous referee for constructive comments on the
377: paper. Y.F. Wu acknowledges the support from NSFC under grant
378: 10733030.
379:
380: \begin{thebibliography}{}
381: \bibitem[2000]{ARM00} Argon, A. L., Reid, M. J., \& Menten, K. M. 2000, ApJS, 129, 159
382: \bibitem[1996]{bsm87} Blake, G. A., Sutton, E. C., Masson, C. R., \& Phillips, T. G.
383: 1987, ApJ, 315, 621
384: \bibitem[2002]{C02} Churchwell, E. 2002, ARA\&A, 40, 27
385: \bibitem{cch94} Cesaroni, R., Churchwell, E., Hofner, P., Walmsley, C. M., \& Kurtz,
386: S. 1994, A\&A, 288, 903
387: \bibitem{frw03} Fish, V. L., Reid, M. J., Wilner, D. J., \& Churchwell,
388: E. 2003, ApJ, 587, 701
389: \bibitem{gni00_01} Gibb, E., Nummelin1 A., Irvine, W. M., Whittet, D. C. B., \& Bergman, P.
390: 2000, ApJ, 545, 309
391: \bibitem{gni00_02} Gibb, E., Wyrowski F., \& Mundy, L. G. 2004, ApJ, 616, 301
392: \bibitem{gl99} Goldsmith, P. F., \& Langer, W. D. 1999, ApJ, 517, 209
393: \bibitem{hkc96} Hofner, P., Kurtz, S., Churchwell, E., Walmsley, C. M., \& Cesaroni,
394: R. 1996, ApJ, 460, 359
395: \bibitem{kzk08} Keto, E., Zhang, Q., \& Kurtz, S. 2008, ApJ, 672, 423
396: \bibitem{lgr02} Liu, Sheng-Yuan, Girart, J. M., Remijan, A., \& Snyder, L. E. 2002, ApJ, 576,
397: 255
398: \bibitem{kcc00} Kurtz, S., Cesaroni, R., Churchwell, E., Hofner, P., \& Walmsley,
399: C. M. 2000, in Protostars \& Planets IV, ed. V. Mannings, A. Boss
400: \& S. Russell (Tucson: Univ. Arizona Press), 299
401: \bibitem{m91} Menten, K. M. 1991, ApJ, 380, L75
402: \bibitem{mss05} M\"{u}ller, H. S. P., Schl\"{o}der, F., Stutzki, J., \& Winnewisser, G.
403: 2005, J. Mol. Struct., 742, 215
404: \bibitem{nbh98} Nummelin, A., Bergman, P., Hjalmarson, A., Friberg, P.,
405: Irvine, W. M., Millar, T. J., Ohishi, M., \& Saito, S. 1998, ApJS, 117, 427
406: \bibitem{ppc98}Pickett, H. M., Poynter, R. L., Cohen, E. M., Delitsky, M. L.,
407: Pearson, J. C., \& Muller, H. S. P. 1998, J. Quant. Spectrosc.
408: Rad. Transf., 60, 883
409: \bibitem{rss04}Remijan, A., Sutton, E. C., Snyder, L. E.,
410: Friedel, D. N., Liu, S.-Y., \& Pei, C.-C. 2004, ApJ, 606, 917
411: \bibitem{rc01}Rodgers, S. D., \& Charnley, S. B. 2001, ApJ, 546, 324
412: \bibitem{Qzm08}Qin, Sheng-Li, Zhao Jun-Hui, Moran, J. M., Marrone, D. P., Patel, N. A.,
413: Wang, J.-J., Liu, S.-Y., \& Kuan, Y.-J. 2008, ApJ, 677, 353
414: \bibitem{sck04}Sewilo, M., Churchwell, E., Kurtz, S., Goss, W. M.,
415: \& Hofner, P. 2004, ApJS, 605, 285
416: \bibitem{sck08} Sewilo, M., Churchwell, E., Kurtz, S., Goss, W. M., \& Hofner, P.
417: 2008, ApJ, 681, 350
418: \bibitem{szk05} Sollins, P, K., Zhang, Q., Keto, E., \& Ho, P. T. P.
419: 2005, ApJ, 631, 399
420: \bibitem{sbm85} Sutton, E. C., Blake, G. A., Masson, C. R., \& Phillips., T. G. 1985, ApJS, 58, 341
421: \bibitem{sjd91} Sutton, E. C., Jaminet, P. A., Danchi, W. C., \& Blake, G. A. 1991, ApJS, 77, 255
422:
423:
424: \end{thebibliography}
425:
426:
427: %% Generally speaking, only the figure captions, and not the figures
428: %% themselves, are included in electronic manuscript submissions.
429: %% Use \figcaption to format your figure captions. They should begin on a
430: %% new page.
431:
432: %\clearpage
433:
434: %% No more than seven \figcaption commands are allowed per page,
435: %% so if you have more than seven captions, insert a \clearpage
436: %% after every seventh one.
437:
438: %% There must be a \figcaption command for each legend. Key the text of the
439: %% legend and the optional \label in curly braces. If you wish, you may
440: %% include the name of the corresponding figure file in square brackets.
441: %% The label is for identification purposes only. It will not insert the
442: %% figures themselves into the document.
443: %% If you want to include your art in the paper, use \plotone.
444: %% Refer to the on-line documentation for details.
445: %\newpage
446:
447:
448:
449: %\figcaption[fig2.ps]{
450: %\label{fig2}}
451:
452: %\figcaption[fig3.ps]{
453: %\label{fig3}}
454:
455: %% Tables should be submitted one per page, so put a \clearpage before
456: %% each one.
457:
458: %% Two options are available to the author for producing tables: the
459: %% deluxetable environment provided by the AASTeX package or the LaTeX
460: %% table environment. Use of deluxetable is preferred.
461: %%
462:
463: %% Three table samples follow, two marked up in the deluxetable environment,
464: %% one marked up as a LaTeX table.
465:
466:
467: %% In this first example, note that the \tabletypesize{}
468: %% command has been used to reduce the font size of the table.
469: %% Note also that the \label command needs to be placed
470: %% inside the \tablecaption.
471:
472: \clearpage
473: \begin{deluxetable}{llccccccccc}
474: \tabletypesize{\scriptsize} \tablenum{1} \tablewidth{0pt}
475: \tablecaption{Molecular Line Parameters} \tablehead{
476: \colhead{Molecule }&
477: &
478: \colhead{Transition} & \colhead{Frequency} & \colhead{$E_{u}$} &
479: \colhead{$I_{P}$}&
480: \colhead{$\Delta V$}& \colhead{$V_{LSR}$}&\colhead{Channel rms}&\\
481: &&&(MHz)&(K)&
482: (Jy~beam$^{-1}$)
483: & (km~s$^{-1}$)&(km~s$^{-1}$) &(Jy~beam$^{-1}$) } \startdata
484:
485: CO$^{a}$ &&2--1&230538.00 &17 & --0.2$\pm$0.07 & 9.9$\pm$3.0&79.9$\pm$1.3 &0.07 \\
486: && \dots & \dots & \dots &--0.3$\pm$0.07 &10.3$\pm$4.5&94.1$\pm$1.6& \dots \\
487: && \dots & \dots & \dots & 0.28$\pm$0.09 & 7.1$\pm$2.1&103.1$\pm$1.3 & \dots \\
488: $^{13}$CO$^{a}$ &&2--1&220398.68 &16 & --0.29$\pm$0.05 & 4.8$\pm$0.8&77.1$\pm$0.4 &0.05 \\
489: && \dots & \dots & \dots & 0.3$\pm$0.05 & 6.3$\pm$0.9&104.3$\pm$0.4 & \dots \\
490: OCS &&19--18 &231060.98 &111 & 1.1$\pm$0.06 & 3.7$\pm$0.2&95.4$\pm$0.1 &0.06 \\
491: SO$_{2}$&& 11$_{1,11}$--10$_{0,10}$&221965.21 &60&1.5$\pm$0.07 &4.1$\pm$0.2 & 95.7$\pm$0.1 &0.07\\
492: CH$_{3}$OH A&& 10$_{2}$--9$_{3}$&231281.10 &166&0.3$\pm$0.07 &4.6$\pm$0.8 & 95.5$\pm$0.3 &0.07\\
493: CH$_{3}$CN && 12$_{0}$--11$_{0}$$^{b}$&220747.26 &69&1.1$\pm$0.08 &3.8$\pm$0.3 & 95.1$\pm$0.1 &0.08\\
494: && 12$_{1}$--11$_{1}$$^{b}$&220743.01 &76&1.2$\pm$0.08 &4.9$\pm$0.4 & 95.0$\pm$0.1 &0.08\\
495: && 12$_{2}$--11$_{2}$&220730.26 &97&0.9$\pm$0.08 &4.1$\pm$0.3 & 95.3$\pm$0.1 &0.08\\
496: && 12$_{3}$--11$_{3}$&220709.02 &133&1.0$\pm$0.08 &4.2$\pm$0.3 & 95.4$\pm$0.1 & 0.08\\
497: && 12$_{4}$--11$_{4}$&220679.29 &183&0.6$\pm$0.08 &4.8$\pm$0.5 & 95.4$\pm$0.2 &0.08\\
498: && 12$_{5}$--11$_{5}$&220641.09 &247&0.7$\pm$0.07 &3.9$\pm$0.3 & 95.3$\pm$0.1 &0.07\\
499: && 12$_{6}$--11$_{6}$&220594.43 &325&0.6$\pm$0.08 &3.3$\pm$0.4 & 95.8$\pm$0.2 &0.08\\
500: H30$\alpha$$^{c}$&& \dots&231900.96 & \dots&0.9$\pm$0.2 &20.9$\pm$0.6&92.5$\pm$0.2&0.06\\
501: \enddata
502:
503: \tablenotetext{\it a} {Negative values of the intensity ($I_{P}$)
504: in the CO and $^{13}$CO spectra indicate the absorption. Positive
505: values indicate the emission.}
506:
507: \tablenotetext{\it b} {The two CH$_{3}$CN transitions
508: (12$_{0}$--11$_{0}$) and (12$_{1}$--11$_{1}$) were blended.}
509:
510: \tablenotetext{\it c}{H30$\alpha$ line parameters are cited from
511: the paper by Keto et al. 2008.}
512:
513: \end{deluxetable}
514: \clearpage
515:
516: \begin{figure}
517: \epsscale{0.4}\plotone{f1.eps}
518: \caption{Continuum and spectral images. (a): The continuum (thin
519: contours) is superimposed on the H30$\alpha$ radio recombination
520: line image (thick contours). The synthesized beam is
521: 1.3$^{\prime\prime}\times 0.8^{\prime\prime}$,
522: P.A.=$-89.6^{\circ}$ (lower-right corner). The rms (1 $\sigma$)
523: noise level of the continuum is 0.003 Jy~beam$^{-1}$. The contours
524: are $-$4, 4, 8, 16, 32, 64, 128, 190, and 220 $\sigma$. The cross
525: symbol indicates the peak position of the continuum source. The
526: contours of the H30$\alpha$ integrated intensity are $-$1.24,
527: 1.24, 3.68, 6.13, 8.58, 11.03, 13.48, 15.93, 18.38, 20.83, and
528: 23.28 Jy~beam$^{-1}$ km~s$^{-1}$; (b): The CH$_{3}$CN
529: (12$_{2}-11_{2}$) integrated intensity contours. The levels are
530: $-$0.74, 0.74, 1.23, 1.72, 2.21, 2.70, 3.19, 3.68, 4.17, and 4.66
531: Jy~beam$^{-1}$ km~s$^{-1}$; (c): The $^{13}$CO (2-1) integrated
532: intensity contours. The levels are $-2, -1.8, -1.6, -1.4, -1.2,
533: -1, -0.8, -0.6$, 1, 1.3, 1.6, 1.9, 2.2, 2.5, 2.8, 3.1
534: Jy~beam$^{-1}$ km~s$^{-1}$; the positive and negative values
535: indicate the emission and absorption, respectively.}
536: \end{figure}
537: \clearpage
538:
539: \begin{figure}
540: \epsscale{0.7}
541: \plotone{f2.eps}\caption{Molecular spectra averaged
542: over one beam. The solid and dashed curves are the observed
543: spectra and the Gaussian fitting to the spectra, respectively.
544: (a), (b), (c), (d), (e) and (f) are for the various $K$ components
545: in the CH$_{3}$CN (12$-$11); (g), (h), (i) and (j) are for OCS
546: (19$-$18), CH$_{3}$OH (10$_{2}-9_{3}$), CO (2$-$1) and $^{13}$CO
547: (2$-$1) transitions, respectively. The spectra are Hanning
548: smoothed for better signal to noise ratios. Negative and positive
549: values of the intensity in the CO and $^{13}$CO spectrum indicate
550: absorption and emission, respectively.}
551: \end{figure}
552:
553: \clearpage
554:
555: \begin{figure}
556: \epsscale{1.0} \plotone{f3.eps} \vspace{1.5cm} \caption{Rotation
557: temperature diagram for the observed CH$_{3}$CN transitions. The
558: linear least-square fit (indicated by solid line) gives a rotation
559: temperature of 308$\pm$22K. The vertical bars indicate the errors
560: of ln (N$_{\rm u}$/g$_{\rm u}$) transferred from the integrated
561: intensities. }
562:
563: \end{figure}
564:
565: \begin{figure}
566: \epsscale{0.8} \plotone{f4.eps} \vspace{1.5cm}
567: \caption{Position-velocity diagram cutting along NE-SW direction
568: across the continuum peak. The diagram is constructed from the OCS
569: transition. The contours are 0.19, 0.38, 0.56, 0.75, 0.94 and 1.13
570: Jy~beam$^{-1}$. }
571:
572: \end{figure}
573:
574: %% If you use the table environment, please indicate horizontal rules using
575: %% \tableline, not \hline.
576: %% Do not put multiple tabular environments within a single table.
577: %% The optional \label should appear inside the \caption command.
578:
579:
580:
581: \end{document}
582:
583: %%
584: %% End of file `sample.tex'.
585: