1: \documentclass[11pt]{article}
2: \usepackage{hyperref}
3: \pdfoutput=1
4: %% Sample Article Demonstrating the use of Fluid Dynamics Videos
5: %% LaTex source file. S.B. Pope, November 28, 2007
6: %% It is important to include the following two (uncommented) lines within the first few lines of the script
7: %\usepackage{hyperref}
8: %\pdfoutput=1
9: %% Because of the use of the hyperref package, this file needs to be processed with PDFLaTeX
10: \usepackage{natbib} % this is needed for JFM bibliography style
11: \usepackage[dvips]{graphicx} % this is required to include eps files
12: % converted from jpeg using Adobe Photoshop
13: % then use figjpegeps to include the eps file
14: % the eps can also be created directly from the pdf using adobe acrobat
15: % and then use the includegraphics as in the curvelet fig. below
16: \usepackage[dvips]{color} % enables color
17: \usepackage{ulem} % required to xout text
18: \normalem % to restore italics
19: %
20: %\include{psfig}
21: %
22: \usepackage{amssymb,amsmath,amsfonts,amsbsy}
23: \usepackage{graphicx}
24: \usepackage{subfigure}
25: \usepackage{epsfig}
26: \usepackage{tabularx}
27: \usepackage[english]{babel}
28: \usepackage{wrapfig}
29: %\usepackage{cite}
30: \usepackage{color}
31: \usepackage{supertabular}
32: %
33: \begin{document}
34: \title{LES of an inclined jet into a supersonic cross-flow}
35: \author{Antonino Ferrante$^1$, Carlos Pantano-Rubino$^2$, \\
36: Georgios Matheou$^1$, Paul E. Dimotakis$^1$,\\
37: Mike Stephens$^3$, Paul Adams$^3$, Richard Walters$^3$, Randall Hand$^3$
38: \\ \\
39: $^1$ Graduate Aeronautical Laboratories, \\
40: \vspace{6pt} California Institute of Technology, CA 91125, USA \\
41: $^2$ Mechanical Science and Engineering, \\
42: \vspace{6pt} University of Illinois at Urbana-Champaign, IL 61801, USA \\
43: $^3$ Data Analysis and Assessment Center, U.S. Army \\
44: Engineer Research and Development Center, MS 39180, USA}
45: \maketitle
46: %% The abstract (in this file, and that submitted as text to arXiv) should include the exact phrase
47: %% "fluid dynamics video" or "fluid dynamics videos"
48: \begin{abstract}
49: This short article describes flow parameters, numerical method, and animations of the fluid dynamics video \href{http://hdl.handle.net/1813/11480}{LES of an Inclined Jet into a Supersonic Cross-Flow}. Helium is injected through an inclined round jet into a supersonic air flow at Mach 3.6. The video shows 2D contours of Mach number and magnitude of density gradient, and 3D iso-surfaces of Helium mass-fraction and vortical structures. Large eddy simulation with the sub-grid scale (LES-SGS) stretched vortex model of turbulent and scalar transport captures the main flow features: bow shock, Mach disk, shear layers, counter-rotating vortices, and large-scale structures.
50: \end{abstract}
51: \subsection*{Flow description}
52: Helium is injected through an inclined round jet into a supersonic air flow (Fig.~1). In the present investigation, the jet axis forms a 30$^\circ$ angle with the streamwise direction of the air flow. The flow parameters of air and helium are reported in Table 1. The jet diameter, $d$, is 3.23$\times 10^{-3}$m, and the boundary layer thickness, $\delta$, of the air flow is 2$\times10^{-2}$m, as in the experimental study of \cite*{mad06}. The air free-stream Mach number is 3.6, the jet Mach number is 1.0, and the jet to free-stream momentum ratio, $q$, is 1.75. The Reynolds number of the air flow based on the momentum thickness is ${\sl Re}_\theta=U_{\rm e} \theta/\nu_{\rm w}=13 \times 10^3$ (${\sl Re}_\delta=U_{\rm e} \delta/\nu_{\rm w}=113\times10^3$), where $U_{\rm e}$ is the free-stream air velocity and $\nu_{\rm w}$ is the kinematic viscosity of air computed at the wall for adiabatic wall conditions.
53: \begin{figure*}[h]
54: \centering
55: \includegraphics[width=1\textwidth]{geometry-table} %%% NOTE: to make it work do not put extension .eps !!!
56: \vspace{-1cm}
57: \end{figure*}
58: \\
59: \subsection*{Numerical method}
60: We performed large-eddy simulation with the sub-grid scale (LES-SGS) stretched vortex model of turbulent and scalar transport developed by Pullin and co-workers \cite[]{pullin97,pullin00-1,pullin00,pullin02}. The governing equations are solved on a Cartesian mesh with adaptive mesh refinement (AMR) \cite[]{deiterd03}.
61: The level-set approach with the ghost-fluid method \cite[]{fedkiw99} is used to treat the complex boundary (Fig.1) where no-slip and adiabatic boundary conditions are applied.
62: The numerical method is a hybrid approach with low numerical dissipation \cite[]{hill04,pantano07} that uses tuned centered finite differences (TCD) \cite[]{hill04} in smooth flow regions, and weighted essentially non-oscillatory (WENO) \cite[]{osher94,shu96} scheme around discontinuities and ghost-fluid boundaries.
63: \newpage
64: \subsection*{Video}
65: The video \href{http://hdl.handle.net/1813/11480}{LES of an Inclined Jet into a Supersonic Cross-Flow} shows five animations:
66: \begin{enumerate}
67: \item Mach number contours in mid-span plane;
68: \item magnitude of density gradient contours in mid-span plane;
69: \item iso-surface of Helium mass fraction $Y_{He}=0.25$;
70: \item vortical structures\footnote{The vortical structures are educed using the $\lambda_2$-method \cite[]{hus95}, where $\lambda_2$ is defined as the second largest eigenvalue of the tensor $(S_{ik}S_{kj}+\Omega_{ik}\Omega_{kj})$, where $S_{ij}\equiv(\partial_jU_i+\partial_iU_j)/2$ is the strain rate tensor, and $\Omega_{ij}\equiv(\partial_jU_i-\partial_iU_j)/2$ is the rotation rate tensor.};
71: \item overlapped iso-surface of Helium mass fraction $Y_{He}=0.25$ and vortical structures.
72: \end{enumerate}
73: Each animation is played at a speed 10,000 times slower than in real life, and shows the flow evolution for about $1.8\times10^{-3}$~s. \\
74: The video shows that the main flow features are well captured: bow shock, Mach disk, shear layers, counter-rotating vortices, and large-scale structures \cite[]{af-etal-aps08}.
75: %
76: \subsection*{Acknowledgments}
77: This work was supported by AFOSR Grants FA9550-04-1-0020 and FA9550-04-1-0389, by the Caltech DoE Advanced Simulation and Computing (ASC) Alliance Center under subcontract No. B341492 of DOE contract W-7405-ENG-48, and NSF Grant EIA-0079871.
78: The simulations were performed at the Center of Advanced Computing Research (CACR) at Caltech.
79: The fluid dynamics video was produced at the Data Analysis and Assessment Center, U.S. Army Engineer Research and Development Center (ERDC).
80: %
81: %\bibliography{ref}
82: \bibliographystyle{jfm}
83: %
84: \begin{thebibliography}{13}
85: \expandafter\ifx\csname natexlab\endcsname\relax\def\natexlab#1{#1}\fi
86:
87: \bibitem[Deiterding(2003)]{deiterd03}
88: {\sc Deiterding, R.} 2003 {\em {Parallel Adaptive Simulation of
89: Multi-dimensional Detonation Structures}\/}. Ph.D. Dissertation.
90:
91: \bibitem[Fedkiw {\em et~al.\/}(1999)Fedkiw, Aslam, Merriman \& Osher]{fedkiw99}
92: {\sc Fedkiw, R.~P., Aslam, T., Merriman, B. \& Osher, S.} 1999 {A
93: non-oscillatory {Eulerian} approach to interfaces in multimaterial flows (the
94: {Ghost Fluid Method)}}. {\em J. Comput. Physics\/} {\bf 152}, 457--492.
95:
96: \bibitem[Ferrante {\em et~al.\/}(2008)Ferrante, Pantano-Rubino, Matheou \&
97: Dimotakis]{af-etal-aps08}
98: {\sc Ferrante, A., Pantano-Rubino, C., Matheou, G. \& Dimotakis, P.} 2008 {LES}
99: of an inclined jet into a supersonic cross-flow at {Mach} 3.6. {\em Bull.
100: {A}mer. {P}hys. {S}oc.\/} .
101:
102: \bibitem[Hill \& Pullin(2004)]{hill04}
103: {\sc Hill, D.~J. \& Pullin, D.~I.} 2004 {Hybrid tuned center-difference-{WENO}
104: method for large eddy simulations in the presence of strong shocks}. {\em J.
105: Comput. Physics\/} {\bf 194}, 435--450.
106:
107: \bibitem[Jeong \& Hussain(1995)]{hus95}
108: {\sc Jeong, J. \& Hussain, F.} 1995 On the identification of a vortex. {\em J.
109: Fluid Mech.\/} {\bf 285}, 69--94.
110:
111: \bibitem[Jiang \& Shu(1996)]{shu96}
112: {\sc Jiang, G.~S. \& Shu, C.~W.} 1996 {Efficient implementation of weighted ENO
113: schemes}. {\em J. Comput. Physics\/} {\bf 126}, 202--228.
114:
115: \bibitem[Kosovi{\'{c}} {\em et~al.\/}(2002)Kosovi{\'{c}}, Pullin \&
116: Samtaney]{pullin02}
117: {\sc Kosovi{\'{c}}, B., Pullin, D.~I. \& Samtaney, R.} 2002 Subgrid-scale
118: modeling for large-eddy simulations of compressible turbulence. {\em Phys.
119: Fluids\/} {\bf 14}, 1511--1522.
120:
121: \bibitem[Liu {\em et~al.\/}(1994)Liu, Osher \& Chan]{osher94}
122: {\sc Liu, X.~D., Osher, S. \& Chan, T.} 1994 Weighted essentially
123: non-oscillatory schemes. {\em J. Comput. Physics\/} {\bf 115}, 200--212.
124:
125: \bibitem[Maddalena {\em et~al.\/}(2006)Maddalena, Campioli \& Schetz]{mad06}
126: {\sc Maddalena, L., Campioli, T.~L. \& Schetz, J.~A.} 2006 Experimental and
127: computational investigation of light-gas injectors in {Mach} 4.0 crossflow.
128: {\em J. Propulsion and Power\/} {\bf 22}, 1027--1038.
129:
130: \bibitem[Misra \& Pullin(1997)]{pullin97}
131: {\sc Misra, A. \& Pullin, D.~I.} 1997 A vortex-based subgrid stress model for
132: large-eddy simulation. {\em Phys. Fluids\/} {\bf 9}, 2443--2454.
133:
134: \bibitem[Pantano {\em et~al.\/}(2007)Pantano, Deiterding, Hill \&
135: Pullin]{pantano07}
136: {\sc Pantano, C., Deiterding, R., Hill, D. \& Pullin, D.} 2007 {A low-numerical
137: dissipation patchbased adaptive mesh refinement method}. {\em J. Comput.
138: Physics\/} {\bf 221}, 63--87.
139:
140: \bibitem[Pullin(2000)]{pullin00-1}
141: {\sc Pullin, D.~I.} 2000 A vortex-based model for the subgrid flux of a passive
142: scalar. {\em Phys. Fluids\/} {\bf 12}, 2311--2319.
143:
144: \bibitem[Voelkl {\em et~al.\/}(2000)Voelkl, Pullin \& Chan]{pullin00}
145: {\sc Voelkl, T., Pullin, D.~I. \& Chan, D.~C.} 2000 A physical-space version of
146: the stretched-vortex subgrid-stress model for large-eddy simulation. {\em
147: Phys. Fluids\/} {\bf 12}, 1810--1825.
148:
149: \end{thebibliography}
150:
151: \end{document}
152:
153: