1: \begin{abstract}

2: The Large Synoptic Survey Telescope (LSST) will use an active optics

3: system (AOS) to maintain alignment and surface figure on its

4: three large mirrors. Corrective actions fed to the LSST AOS are

5: determined from information derived from 4 curvature wavefront sensors located at the

6: corners of the focal plane. Each wavefront sensor is a split detector such that the halves

7: are 1mm on either side of focus. In this paper we describe the

8: extensions to published curvature wavefront sensing algorithms needed

9: to address challenges presented by the LSST, namely the large central

10: obscuration, the fast $f$/1.23 beam, off-axis pupil distortions, and vignetting

11: at the sensor locations.   We also describe corrections needed for the

12: split sensors and the effects from the angular separation of different

13: stars providing the intra- and extra-focal images. Lastly, we present simulations

14: that demonstrate convergence, linearity,

15: and negligible noise when compared to atmospheric effects when the

16: algorithm extensions are applied to the LSST optical system.  The

17: algorithm extensions reported here are generic and can easily be

18: adapted to other wide-field optical systems including similar

19: telescopes with large central obscuration and off-axis curvature sensing.

20: \end{abstract}

21: