1: \begin{abstract}

2: 	This work is motivated by the monitoring of conductive clogging deposits

3:         in steam generator at the level of support plates. One would like to

4:         use monoaxial coils measurements to obtain estimates on the clogging

5:         volume. We propose a 3D shape optimization technique based on simplified

6:         parametrization of the geometry adapted to the measurement

7:         nature and resolution. The direct problem is modeled by the eddy current approximation

8:         of time-harmonic Maxwell's equations in the low frequency regime. A

9:         potential formulation is adopted in order to easily handle the complex

10:         topology of the industrial problem setting. We first characterize the

11:          shape derivatives of the deposit impedance signal using an adjoint field technique. For the

12:         inversion procedure, the direct and adjoint

13:         problems have to be solved for each coil vertical position which is

14:         excessively time and memory consuming.  To overcome this difficulty, we propose and discuss a

15:         steepest descent method based on a fixed and invariant

16:         triangulation. Numerical experiments are presented to illustrate the convergence and the efficiency of the method.

17: \end{abstract}

18: