1: \begin{abstract}

2: Accurate numerical simulation of coupled fracture/fault deformation and fluid flow is crucial to the performance and safety assessment of many subsurface systems.

3: %

4: In this work, we consider the discretization and enforcement of contact conditions at such surfaces.

5: %

6: The bulk rock deformation is simulated using low-order continuous finite elements, while frictional contact conditions are imposed by means of a Lagrange multiplier method.

7: %

8: We employ a cell-centered finite-volume scheme to solve the fracture fluid mass balance equation.

9: %

10: From a modeling perspective, a convenient choice is to use a single grid for both mechanical and flow processes, with piecewise-constant interpolation of Lagrange multipliers, i.e., contact tractions and fluid pressure.

11: %

12: Unfortunately, this combination of displacement and multiplier variables is not uniformly inf-sup stable, and therefore requires a stabilization technique.

13: %

14: Starting from a macroelement analysis, we develop two algebraic stabilization approaches and compare them in terms of robustness and convergence rate.

15: %

16: The proposed approaches are validated against challenging analytical two- and three-dimensional benchmarks to demonstrate accuracy and robustness.

17: %

18: These benchmarks include both pure contact mechanics problems and well as problems with tightly-coupled fracture flow.

19: \end{abstract}

20: