1: \begin{abstract}

2: The forthcoming sixth-generation (6G) communications standard is anticipated

3: to provide integrated sensing and communication (ISAC) as a fundamental

4: service. These ISAC systems present unique security challenges because

5: of the exposure of information-bearing signals to sensing targets,

6: enabling them to potentially eavesdrop on sensitive communication

7: information with the assistance of sophisticated receivers. Recently,

8: reconfigurable intelligent surfaces (RISs) have shown promising results

9: in enhancing the physical layer security of various wireless communication

10: systems, including ISAC. However, the performance of conventional

11: passive RIS (pRIS)-enabled systems are often limited due to multiplicative

12: fading, which can be alleviated using active RIS (aIRS). In this paper,

13: we consider the problem of beampattern gain maximization in a secure

14: pRIS/aRIS-enabled ISAC system, subject to signal-to-interference-plus-noise

15: ratio constraints at communication receivers, and information leakage

16: constraints at an eavesdropping target. For the challenging non-convex

17: problem of joint beamforming design at the base station and the pRIS/aRIS,

18: we propose a novel successive convex approximation (SCA)-based method.

19: Unlike the conventional alternating optimization (AO)-based methods,

20: in the proposed SCA-based approach, all of the optimization variables

21: are updated simultaneously in each iteration. The proposed method

22: shows significant performance superiority for pRIS-aided ISAC system

23: compared to a benchmark scheme using penalty-based AO method. Moreover,

24: our simulation results also confirm that aRIS-aided system has a notably

25: higher beampattern gain at the target compared to that offered by

26: the pRIS-aided system for the same power budget. We also present a

27: detailed complexity analysis and proof of convergence for the proposed

28: SCA-based method.

29: \end{abstract}

30: