1: \begin{abstract}

2: In this paper, we carefully develop a finite element (FE) model that gives accurate through-thickness predictions of stress and strain distributions during the steady-state cold rolling process. 

3: These through-thickness predictions unveil an oscillatory pattern that is shown to have important consequences for residual stress in the rolled sheet. 

4: We believe this is the first time that through-thickness FE results have been accurately validated by comparison to non-FE results, in this case by comparison to a recent analytical model of through-thickness variation in cold rolling. 

5: While we use here the ABAQUS commercially available FE software, our observations are relevant to all FE simulations of cold rolling. 

6: Care is taken by considering both convergence in number of elements through thickness, convergence to a steady state, and the avoidance of other numerical artefacts such as shear locking and hourglassing. 

7: We find that previous FE models of cold rolling are usually woefully under-resolved through-thickness; e.g. using 10 elements through-thickness, while we require 60 here for convergence. 

8: Convergence of roll force and roll torque, used in previous studies to validate models, are shown to be poor indicators of through-thickness convergence. 

9: We also show that the through-thickness oscillatory pattern may have important consequences for predicting curvature during asymmetric rolling.

10: 

11: \ifjournal\else\keywords{\thekeywords}\fi

12: \end{abstract}

13: