1: \begin{subequations}\label{eq:microgridModel:transmissionNetwork}

2: The power transmitted over the lines can be derived using \ac{dc} power flow approximations for \ac{ac} grids \cite{HNRR2014, PMVDB2005}.

3: Thus, the power flowing over the $E$ transmission lines, ${\powerFlow{} = [\powerFlow{1} ~ \cdots ~ \powerFlow{E}]\tran}$, can be derived from the power of the units and the load using the linear relation

4: \begin{equation}\label{eq:nodePowerToLinePower}{}

5: 	\powerFlow{} = {F} \cdot \begin{bmatrix}\power{}\tran & \disturbance{d} \tran \end{bmatrix} \tran,

6: \end{equation}

7: where ${F}\in\R^{E\times(U+D)}$ is a matrix that links the power flowing over the lines with the power provided or consumed by the units and loads.

8: More information on the derivation of $F$ can be found, e.g., in \cite{HNRR2014,HBR+2018}.

9: Due to the limited transmission capability of the lines, $\powerFlow{}$ is desired to be bounded by

10: \begin{equation}\label{eq:network:powerLimit}

11: 	p_{\mathrm{e}}^{\min} \leq \powerFlow{} \leq p_{\mathrm{e}}^{\max}

12: \end{equation}

13: with $p_{\mathrm{e}}^{\min}\in\R^E_{\leq 0}$ and $p_{\mathrm{e}}^{\max}\in\R^E_{\geq 0}$.

14: Additionally, the generated power must equal consumed power at all times, i.e.,

15: \begin{equation}\label{eq:network:powerEquilibrium}

16: 	\One_{T}\tran \power{t} + \One_{S}\tran \power{s} + \One_{R}\tran \power{r} = \One_{D}\tran \disturbance{d}.

17: \end{equation}

18: \end{subequations}

19: