1: \begin{abstract}

2: This paper addresses the problem of estimating the attitude of a rigid

3: body, which is subject to high accelerations and equipped with inertial

4: measurement unit (IMU) and sensors providing the body velocity (expressed

5: in the reference frame attached to the body). That issue can be treated

6: differently depending on the level of confidence in the measurements

7: of the magnetometer of the IMU, particularly with regard to the observation

8: of the inclination component with respect to the vertical direction,

9: rendering possible to describe the interaction with gravity. Two cases

10: are then studied: either (i) the magnetometer is absent and only the

11: inclination can be estimated, (ii) the magnetometer is present, giving

12: redundancy and full attitude observability. In the latter case, the

13: presented observer allows to tune how much the inclination estimation

14: is influenced by the magnetometer. All state estimators are proposed

15: with proof of almost global asymptotic stability and local exponential

16: convergence. Finally, these estimators are compared with state-of-the-art

17: solutions in clean and noisy simulations, allowing recommended solutions

18: to be drawn for each case.\thanks{M. Benallegue and R. Cisneros are with Humanoid Research Group, National

19: Institute of Advanced Industrial Science and Technology (AIST), Tsukuba,

20: Ibaraki, Japan. A. Benallegue is with Université Paris-Saclay, UVSQ,

21: Laboratoire d'Ingénierie des Systèmes de Versailles, 78124, Vélizy

22: -Villacoublay, France and JRL-AIST (Joint Robotics Laboratory), Tsukuba,

23: Ibaraki, Japan. Y. Chitour is with Université Paris-Saclay, CNRS,

24: CentraleSupélec,  Laboratoire des Signaux et Systèmes,

25: 91190, Gif-sur-Yvette, France. \texttt{\small{}mehdi.benallegue@aist.go.jp,

26: abdelaziz.benallegue@uvsq.fr, rafael.cisneros@aist.go.jp, yacine.chitour@l2s.centralesupelec.fr}}

27: \end{abstract}

28: