1: \begin{abstract}

2:   The Submillimetre Common User Bolometer Array 2 (\scuba) is an

3:   instrument operating on the 15-m James Clerk Maxwell Telescope,

4:   nominally consisting of 5120 bolometers in each of two simultaneous

5:   imaging bands centred over 450 and 850\,\micron. The camera is

6:   operated by scanning across the sky and recording data at a rate of

7:   200\,Hz. As the largest of a new generation of multiplexed kilopixel

8:   bolometer cameras operating in the (sub)millimetre, \scuba\ data

9:   analysis represents a significant challenge.  We describe the

10:   production of maps using the Sub-Millimetre User Reduction Facility

11:   (SMURF) in which we have adopted a fast, iterative approach to

12:   map-making that enables data reduction on single, modern, high-end

13:   desktop computers, with execution times that are typically shorter

14:   than the observing times.  SMURF is used in an automated setting,

15:   both at the telescope for real-time feedback to observers, as well

16:   as for the production of science products for the JCMT Science

17:   Archive at the Canadian Astronomy Data Centre. Three detailed case

18:   studies are used to: (i) explore convergence properties of the

19:   map-maker using simple prior constraints (Uranus -- a point source);

20:   (ii) achieve the white-noise limit for faint point-source studies

21:   (extragalactic blank-field survey of the Lockman Hole); and (iii)

22:   demonstrate that our strategy is capable of recovering angular

23:   scales comparable to the size of the array footprint (approximately

24:   5\,arcmin) for bright extended sources (star-forming region M17).

25: \end{abstract}

26: