1: \begin{abstract}

2:     The numerical simulation of \red{weakly} nonlinear ultrasound is

3:     important in treatment planning for \red{focused ultrasound (FUS)}

4:     therapies. However, the large domain sizes and generation of higher

5:     harmonics at the focus make these problems extremely computationally

6:     demanding. Numerical methods typically employ a uniform mesh fine

7:     enough to resolve the highest harmonic present in the problem,

8:     leading to a very large number of degrees of freedom. This paper

9:     proposes a more efficient strategy in which each harmonic is

10:     approximated on a separate mesh, the size of which is proportional

11:     to \red{the} wavelength of the harmonic. The increase in resolution

12:     required to resolve a smaller wavelength is balanced by a reduction

13:     in the domain size. This nested meshing is feasible owing to the

14:     increasingly localised nature of higher harmonics near the focus.

15: 

16:     Numerical experiments are performed for \red{FUS} transducers in

17:     homogeneous media in order to determine the size of the meshes

18:     required to accurately represent the harmonics. In particular, a

19:     fast \textit{volume potential} approach is proposed and employed to

20:     perform convergence experiments as the computation domain size is

21:     modified. This approach allows each harmonic to be computed via the

22:     evaluation of an integral over the domain. Discretising this

23:     integral using the midpoint rule allows the computations to be

24:     performed rapidly with the FFT. It is shown that at least an order

25:     of magnitude reduction in memory consumption and computation time

26:     can be achieved with nested meshing. \red{Finally, it is

27:     demonstrated how to generalise this approach to inhomogeneous

28:     propagation domains.}

29: \end{abstract}

30: