1: \begin{abstract}

2: A new numerical scheme for solving incompressible Bingham flows with variable density, plastic viscosity and yield stress is proposed.

3: The mathematical and computational difficulties due to the non-differentiable definition of the stress tensor in the plug regions, \textit{i.e.}

4: where the strain-rate tensor vanishes, is overcome by using a projection formulation as in the Uzawa-like method for viscoplastic flows.

5: This projection definition of the plastic tensor is coupled with a fractional time-stepping scheme designed for Newtonian incompressible flows with

6: variable density. The plastic tensor is treated implicitly in the first sub-step of the fractional time-stepping scheme and a fixed-point iterative procedure

7: is used for its computation. A pseudo-time relaxation term is added into the Bingham projection whose effect is to ensure a geometric convergence of the

8: fixed-point algorithm. This is a key feature of the bi-projection scheme which provides a fast and accurate computation of the plastic tensor.

9: Stability and error analyses of the bi-projection scheme are provided. 

10: The use of the discrete divergence-free velocity to convect the density in

11: the mass conservation equation allows us to derive lower and upper bounds for the discrete density.

12: The error induced by the pseudo-time relaxation term is controlled by a prescribed numerical parameter so that a first-order estimate of the time

13: error is derived for the velocity field and the density, as well as the dependent parameters that are the plastic viscosity and the yield stress.

14: \end{abstract}

15: