1: \begin{abstract}

2: \MOD{

3: A system consisting of a doubly clamped beam with an attached body (slider) free to move along the beam has been studied recently by multiple research groups.

4: Under harmonic base excitation, the system has the capacity to passively adapt itself (by slowly changing the slider position) to yield either high or low vibrations.

5: The central contributions of this work are the refinement of the recently developed system model with regard to the finite stiffness of the beam's clamping, followed by a thorough validation of this model against experimental results.

6: With the intent to achieve repeatable and robust self-adaption, a new prototype of the system was designed, featuring, in particular, a continuously adjustable gap size and a concave inner contact geometry.

7: The initial beam model is updated based on the results of an Experimental Nonlinear Modal Analysis of the system (without slider).

8: By varying the excitation level and frequency in a wide range, all known types of behavior were reproduced in the experiment.

9: The simulation results of the updated model with slider are in excellent agreement with the measurements, both qualitatively (type of behavior) and quantitatively.

10: Minor deviations are attributed to the system's sensitivity to inevitable uncertainties, in particular with regard to the friction coefficient and the linear natural frequency.

11: It is thus concluded that the proposed model is well-suited for further analysis of its intriguing dynamics and for model-based optimization for technical applications such as energy harvesting.

12: }

13: \end{abstract}

14: