1: \begin{abstract}

2: Results on the Prandtl--Blasius type kinetic and thermal boundary layer thicknesses 

3: in turbulent Rayleigh--B\'enard convection in a broad range of Prandtl numbers

4: are presented. 

5: By solving the laminar Prandtl--Blasius boundary layer equations, we 

6: calculate   

7: the ratio of the thermal and kinetic boundary layer thicknesses, which 

8: depends on the Prandtl number $\Pran$ only.

9: It is approximated as $0.588\Pran^{-1/2}$ for $\Pran\ll\Pran^*$

10: and as  $0.982\Pran^{-1/3}$ for $\Pran^*\ll\Pran$, with $\Pran^*\equiv0.046$.

11: %

12: Comparison of the 

13: Prandtl--Blasius velocity boundary layer thickness with that evaluated 

14: in the direct  numerical simulations

15: by Stevens, Verzicco, and Lohse

16: ({\it J. Fluid Mech.} 643, 495 (2010)) gives very good agreement.

17: Based on the Prandtl--Blasius type considerations, 

18: we derive a lower-bound estimate for the minimum number of the computational mesh nodes, required to conduct accurate numerical 

19: simulations of moderately high (boundary layer dominated) turbulent Rayleigh--B\'enard convection, 

20: in the thermal and kinetic boundary layers close to bottom and top  plates.

21: It is shown that the number of required nodes 

22: within each boundary layer depends on $\Nu$ and $\Pran$ and grows with the Rayleigh number $\Ra$ not slower than $\sim\Ra^{0.15}$. 

23: This estimate agrees excellently with empirical results, which were 

24: based on the convergence of the Nusselt number in numerical simulations.

25: \end{abstract}

26: