1: % describe the version of software, trigger path

2: \chapter{Monte Carlo Samples, Acceptance and Efficiencies}

3: \label{ch:mc}

4: With the raw yield in hand, we now turn to the correction which

5: must be applied to obtain the value of the ratio of branching fractions,

6: that is the acceptance, trigger and reconstruction efficiency which may 

7: only be calculated using a Monte Carlo program.

8: The Monte Carlo (MC) simulation plays a crucial role in this analysis. 

9: In addition to the acceptance and efficiencies for our signals and 

10: backgrounds, as described in Section~\ref{sec-eff} and Chapter~\ref{ch:bg},

11: the MC is used for the optimization of signals in Section~\ref{sec-opt}. 

12: MC is also used to find out the function form that describes the 

13: mass spectrum of the background due to partial- or mis-reconstruction in 

14: Section~\ref{sec-massfit}.

15: In this chapter, we first explain the components of Monte Carlo samples and 

16: show that, in general, the MC reproduces the data. Then we present the

17: acceptance, trigger and reconstruction efficiencies obtained from the MC.

18: 

19: \input{mcsample}

20: \input{datamc}

21: \input{eff}

22: 

23: \section{Summary}

24: We have described the procedure of generating MC samples and compared 

25: the MC distributions with those in the data. In general, the MC and data 

26: are in good agreement. We also obtain the signal efficiencies from the MC. 

27: It is confirmed that the 

28: efficiency ratios from both the \Lb\ and \Bd\ modes are insensitive to 

29: the time variation of beam lines and SVT trigger configurations. 

30: 

31: 

32: 

33: 

34: