1: %****** Start of file apssamp.tex ******
2: %
3: % This file is part of the APS files in the REVTeX 4 distribution.
4: % Version 4.0 of REVTeX, August 2001
5: %
6: % Copyright (c) 2001 The American Physical Society.
7: %
8: % See the REVTeX 4 README file for restrictions and more information.
9: %
10: % TeX'ing this file requires that you have AMS-LaTeX 2.0 installed
11: % as well as the rest of the prerequisites for REVTeX 4.0
12: %
13: %
14: \documentclass[prd,twocolumn,showpacs,amsmath,amssymb]{revtex4}
15: \usepackage{graphicx}% Include figure files
16: \usepackage{dcolumn}% Align table columns on decimal point
17: \usepackage{bm}% bold math
18:
19: %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
20: % Alter some LaTeX defaults for better treatment of figures:
21: % See p.105 of "TeX Unbound" for suggested values.
22: % See pp. 199-200 of Lamport's "LaTeX" book for details.
23: % General parameters, for ALL pages:
24: \renewcommand{\topfraction}{0.9} % max fraction of floats at top
25: \renewcommand{\bottomfraction}{0.8} % max fraction of floats at bottom
26: % Parameters for TEXT pages (not float pages):
27: \setcounter{topnumber}{2}
28: \setcounter{bottomnumber}{2}
29: \setcounter{totalnumber}{4} % 2 may work better
30: \setcounter{dbltopnumber}{2} % for 2-column pages
31: \renewcommand{\dbltopfraction}{0.9} % fit big float above 2-col. text
32: \renewcommand{\textfraction}{0.07} % allow minimal text w. figs
33: % Parameters for FLOAT pages (not text pages):
34: \renewcommand{\floatpagefraction}{0.7} % require fuller float pages
35: % N.B.: floatpagefraction MUST be less than topfraction !!
36: \renewcommand{\dblfloatpagefraction}{0.7} % require fuller float pages
37:
38: % remember to use [htp] or [htpb] for placement
39: %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
40: \newcommand{\figwidth}{0.95\columnwidth}
41:
42: \newcommand{\MWT}{${\cal M}$WT}
43: \newcommand{\vWT}{$\nu$WT}
44: \newcommand{\mpt}{\mbox{$\slash\kern-5.5pt p_T$}}
45: \newcommand{\mpx}{\mbox{$\slash\kern-5.5pt p_x$}}
46: \newcommand{\mpy}{\mbox{$\slash\kern-5.5pt p_y$}}
47: \newcommand{\x}{\hphantom{0}}
48: \newcommand{\ox}{\hphantom{.0}}
49:
50: \begin{document}
51:
52: \hspace{5.2in}\mbox{FERMILAB-PUB-06-354-E}
53:
54: \title{Measurement of the top quark mass in the dilepton channel}
55:
56: \input list_of_authors_r2.tex
57:
58: \date{May 29, 2007}
59:
60: \begin{abstract}
61: \vspace*{0.5cm}
62: We present a measurement of the top quark mass in the dilepton channel based on approximately 370~pb$^{-1}$ of data collected by the D\O\ experiment during Run II of the Fermilab Tevatron collider. We employ two different methods to extract the top quark mass. We show that both methods yield consistent results using ensemble tests of events generated with the D\O\ Monte Carlo simulation. We combine the results from the two methods to obtain a top quark mass $m_t = 178.1\pm8.2$~GeV. The statistical uncertainty is 6.7~GeV and the systematic uncertainty is 4.8~GeV.
63: \end{abstract}
64:
65: \pacs{14.65.Ha}
66: \maketitle
67:
68: % par 1
69: The top quark mass is an important parameter in standard model~\cite{sm} predictions. For example, loops involving top quarks provide the dominant radiative corrections to the value of the $W$ boson mass. Precise measurements of the $W$ boson and top quark masses provide a constraint on the Higgs boson mass~\cite{Wrad}.
70:
71: % par 2
72: At the Tevatron, top and antitop quarks are predominantly pair-produced. Top quarks decay to a $W$ boson and a $b$ quark. If the $W$ bosons from the top and the antitop quarks both decay leptonically (to $e\nu$ or $\mu\nu$) the final state consists of two charged leptons, missing transverse momentum ($\mpt$) from the undetected neutrinos, and two jets from the fragmentation of the $b$ quarks. We call this the dilepton channel. It has a relatively small branching fraction ($\approx 5$\%) but very low backgrounds. The measurement of the top quark mass in the dilepton channel is statistically limited. It provides an independent measurement of the top quark mass that can be compared with measurements in other $t\overline{t}$ decay channels, and a consistency check on the $t\overline{t}$ hypothesis in the dilepton channel.
73:
74: % par 3
75: The D\O\ detector is a multipurpose collider detector~\cite{run2det}. The central tracker employs silicon microstrips close to the beam and concentric cylinders covered with scintillating fibers in a 2~T axial magnetic field. The liquid-argon/uranium calorimeter is divided into a central section covering pseudorapidity $|\eta|\leq1.1$ and two endcap calorimeters extending coverage to $|\eta|\leq 4.2$~\cite{run1det}, where $\eta=-\ln[\tan(\theta/2)]$ and $\theta$ is the polar angle with respect to the proton beam direction. The muon spectrometer consists of a layer of tracking detectors and scintillation trigger counters between the calorimeter and 1.8~T toroidal iron magnets, followed by two similar layers outside the toroids.
76:
77: % par 4
78: We present here two measurements that were carried out independently by two groups of analyzers. Both groups chose to optimize their analyses in different ways, one using a relatively loose event selection, the other taking advantage of the low background in top-antitop samples selected using tagging of $b$-quark jets. In the end, we combine the results from both analyses taking into account the correlations between the results.
79:
80: % par 5
81: The event selection is based on the measurement of the cross section for $t\overline{t}$-production in the dilepton channel\cite{xsec} with a few modifications. The analyses use about 370 pb$^{-1}$ of data from $p\overline{p}$ collisions at $\sqrt{s}$=1.96 TeV collected with the D\O\ detector at the Fermilab Tevatron collider.
82:
83: % par 6
84: We select events with two oppositely charged, isolated leptons ($e$ or $\mu$) with transverse momentum $p_T>15$~GeV and at least two jets with $p_T>20$~GeV. Electron candidates are isolated clusters of energy in the electromagnetic section of the calorimeter that agree in their profile with that expected from electromagnetic showers, based on Monte Carlo simulations, and that are matched with a charged particle track reconstructed in the central tracker. Electrons must be either in the central calorimeter (pseudorapidity $|\eta|<1.1$) or in the forward calorimeter ($1.5<|\eta|<2.5$). Muons are reconstructed as tracks in the muon spectrometer with $|\eta|<2$, matched to a charged particle track in the central tracker. They must be isolated from other activity in the calorimeter and in the tracker. Jets are reconstructed with the improved legacy cone algorithm\cite{jetalgo} with cone size $\Delta R = \sqrt{\Delta\eta^2+\Delta\phi^2} = 0.5$ and are restricted to $|\eta|<2.5$. All jets were corrected using the standard D\O\ jet energy scale corrections\cite{jetscale}.
85:
86: % par 7
87: We distinguish $e\mu$, $ee$, and $\mu\mu$ events. For $e\mu$ events we require $H_T>122$~GeV, where $H_T$ is the scalar sum of the larger of the two lepton $p_T$ values and the $p_T$ values of the leading two jets.
88: For $ee$ events we require sphericity $S> 0.15$ and missing transverse momentum $\mpt>35$--$40$~GeV, depending on the dielectron invariant mass $m(ee)$, and we reject events with $80<m(ee)<100$~GeV to reduce the background from $Z\rightarrow ee$ decays. Sphericity is defined as 1.5 times the sum of the first two eigenvalues of the normalized momentum tensor calculated using all electrons, muons and jets in the event.
89:
90: % par 8
91: For $\mu\mu$ events we require inconsistency with the $Z\rightarrow\mu\mu$ hypothesis based on the $\chi^2$ of a kinematic fit. In some $Z\rightarrow \mu\mu$ events a muon momentum is significantly mismeasured. These events are not consistent kinematically with $Z$ decays and they are therefore not eliminated by the kinematic fit. The mismeasured muon momentum gives rise to $p_T$ imbalance in the muon direction. We therefore require $\mpt>35$~GeV if the azimuthal angle between the leading muon and the direction of $\mpt$, $\Delta\phi(\mbox{$\mpt$},\mu) < 175^\circ$. We tighten the $\mpt$ requirement to 85 GeV if the leading muon and the $\mpt$ are approximately collinear in the transverse direction.
92:
93: % par 9
94: For our mass measurements we use the following samples of events.
95: The ``$b$-tag'' sample consists of events that have at least one jet that contains a secondary vertex tag with transverse decay length significance $\Lambda_{xy}>7$~\cite{btag}. This sample has very low backgrounds. The ``no-tag'' sample consists of events that have no such secondary vertex tags. The 26 events in these two samples consist of 20 $e\mu$ events, 5 $ee$, and 1 $\mu\mu$ event.
96:
97: % par 10
98: The ``tight'' sample does not use the $b$-tagging information. It contains all $ee$ and $\mu\mu$ events that are in either the $b$-tag or the no-tag samples. For $e\mu$ events the tight sample requires the more restrictive cuts $H_T>140$~GeV, $\mpt>25$~ GeV and tighter electron identification cuts to reduce backgrounds.
99: To increase the acceptance for dilepton decays, we also analyze a sample of events that requires only one well-identified lepton ($e$ or $\mu$) with $p_T>15$~GeV and an isolated track with $p_T>15$~GeV instead of the second identified lepton. The events must also have at least one jet with a secondary vertex tag, and $\mpt>15$--$35$~GeV, depending on lepton flavor and the invariant mass of the lepton+track system. We call this the ``$\ell$+track'' sample. Events with two well-identified leptons are vetoed from this sample so that there is no overlap between the $\ell$+track sample and the other dilepton samples. There are 6 $e$+track events and 3 $\mu$+track events in this sample. The observed event yields for each of the data samples are listed in Table \ref{tab:nem}.
100:
101: \begin{table}[htp]
102: \caption{\label{tab:nem} Expected and observed dilepton event yields for $t\overline{t}$ production with $m_t=175$~GeV and the backgrounds from $WW$ and $Z$ production based on Monte Carlo, and from misidentified leptons (mis-id) based on collider data.}
103: \begin{ruledtabular}
104: \begin{tabular}{lcccccccc}
105: Sample & $t\overline{t}$ & $WW$ & $Z$ & Mis-id & Total & Data \\ \hline
106: $\ell\ell$ no-tag & \x$7.2$ & $1.1$\x & $2.6$\x & $2.2$ & $13.2\binom{+2.8}{-2.1}$ & 12 \\
107: $\ell\ell$ $b$-tag & \x$9.9$ & $0.05$ & $0.12$ & $0.09$ & $10.1\pm0.9$ & 14 \\
108: $\ell\ell$ tight & $15.8$ & $1.1$\x & $2.4$\x & $0.5$ & $19.8\pm0.6$ & 21 \\
109: $\ell$+track & \x$6.3$ & $0.01$ & $1.8$\x & $0.4$\x & \x$8.5\pm0.3$ & \x9\\
110: \end{tabular}
111: \end{ruledtabular}
112: \end{table}
113:
114: % par 11
115: Monte Carlo samples are generated for nineteen values of the top quark mass between 120 and 230~GeV. The simulation uses {\sc alpgen}~\cite{alpgen} with {\sc cteq5l} parton distribution functions~\cite{CTEQ5} as the event generator, {\sc pythia}~\cite{pythia} for fragmentation and decay, and {\sc geant}~\cite{geant} for the detector simulation. No parton-shower matching algorithm was used in the generation of these event samples. We simulate diboson production with {\sc alpgen} and {\sc pythia} and $Z/\gamma^*\rightarrow\tau\tau$ processes with {\sc pythia}. The number of expected events are determined by applying the selection cuts to these Monte Carlo event samples. These samples are corrected for lepton, jet and $b$-tagging efficiencies determined from collider data.
116:
117: % par 12
118: The tagging efficiency for $b$-jets is measured in a data sample enhanced
119: in heavy flavor jets by requiring at least one jet with a muon in each event.
120: Monte-Carlo based corrections are applied to correct for sample biases. The
121: probability to tag a light-flavor jet is measured from collider data using
122: events with a secondary vertex with negative decay length, meaning that the
123: tracks forming the secondary vertex meet in the hemisphere that is on the opposite side of the primary vertex from the jet.
124:
125: % par 13
126: The energy of Monte Carlo jets is increased by 3.4\% in addition to the nominal jet energy scale corrections. This factor was determined by fitting the top mass and the jet energy scale in lepton+jets events and brings the invariant mass distribution of the two jets from the $W$ boson decay in lepton+jets Monte Carlo events in agreement with that observed in the data.
127:
128: % par 14
129: Event yield normalizations for $Z\to ee$ and $Z\to \mu\mu$ are obtained from data. The number of events with misidentified leptons is dominated by jets misidentified as electrons. We construct a likelihood discriminant to distinguish electrons from misidentified jets based on the shape of the energy cluster in the calorimeter and the on the matched track. We determine the contamination by misidentified jets in our sample by fitting the distribution of this likelihood discriminant before we cut on it. Expected yields for signal and background are given in Table~\ref{tab:nem}.
130:
131: % par 15
132: We use only the two jets with the highest $p_T$ in this analysis. We assign these two jets to the $b$ and $\overline{b}$ quarks from the decay of the $t$ and $\overline{t}$ quarks. If we assume a value $m_t$ for the top quark mass, we can determine the pairs of $t$ and $\overline{t}$ momenta that are consistent with the observed lepton and jet momenta and $\mpt$. A solution refers to a pair of top-antitop quark momenta that is consistent with the observed event. For each assignment of observed momenta to the final state particles and for each hypothesized value of $m_t$, there may be up to four solutions. We assign a weight function $w(m_t)$ to each solution, as described below. Events for which no solution exists are rejected from our data and Monte Carlo event samples. The event yields in Table~\ref{tab:nem} include this additional selection requirement. Two events from the collider data are rejected with this requirement.
133:
134: % par 16
135: We consider each of the two possible assignments of the two jets to the $b$ and $\overline{b}$ quarks. We account for detector resolutions by repeating the weight calculation with input values for the lepton and jet momenta that are drawn from the detector resolution functions for objects with the observed momenta. We refer to this procedure as resolution sampling. For each event we obtain a weight $W(m_t)=1/N\times\sum_{j=1}^N\sum_{i=1}^n w(m_t)_{ij}$ by summing over all $n$ solutions and averaging over $N$ resolution samples. This weight characterizes the likelihood that the event is produced in the decay of a $t\overline{t}$ pair as a function of $m_t$.
136:
137: % par 17
138: The techniques we use are similar to those used by the D\O\ Collaboration to measure the top quark mass in the dilepton channel using Run I data~\cite{RunI}. The data are analyzed using two different methods that differ in the event samples that they are based on, in the calculation of the event weight, and in the algorithm that compares the weights for the observed events to Monte Carlo predictions to extract the top quark mass.
139:
140: % par 18
141: The matrix-element weighting technique (\MWT) follows the ideas proposed by Dalitz and Goldstein~\cite{DalitzGoldstein} and Kondo~\cite{Kondo}. The solution weight is
142: $$w(m_t)=f(x)f(\overline{x})p(E_\ell^*|m_t)p(E_{\overline{\ell}}^*|m_t),$$
143: where $f(x)$ is the parton distribution function of the proton and $x$ ($\overline{x}$) is the momentum fraction carried by the initial (anti)quark. The quantity $p(E_\ell^*|m_t)$ is the probability that the lepton has energy $E_\ell^*$ in the top quark rest frame for the hypothesized top quark mass $m_t$.
144:
145: % par 19
146: For each event we use the value of the hypothesized top quark mass $m_{\rm peak}$ at which $W(m_t)$ reaches its maximum as the estimator for the mass of the top quark. We generate probability density functions of $m_{\rm peak}$ for a range of top quark masses using Monte Carlo simulations. We call these distributions templates.
147: To compute the contribution of backgrounds to the templates, we use $Z\rightarrow\tau\tau$ and $WW$ Monte Carlo events. Backgrounds arising from detector signals that are misidentified as electrons or muons are estimated from collider data samples.
148:
149: % par 20
150: We compare the distribution of $m_{\rm peak}$ for the observed events to these templates using a binned maximum likelihood fit. The likelihood is calculated as
151: $$L(m_t)=\prod_{i=1}^{n_{\rm bin}}\left[\frac{n_ss_i(m_t)+n_bb_i}{n_s+n_b}\right]^{n_i},$$
152: where $n_i$ is the number of data events observed in bin $i$, $s_i(m_t)$ is the normalized signal template contents for bin $i$ at top quark mass $m_t$, $b_i$ is the normalized background template contents for bin $i$. The product runs over all $n_{\rm bin}$ bins. The background template consists of events from all background sources added in the expected relative proportions. The signal-to-background fraction is fixed to $n_s/n_b$ with the numbers of signal and background events ($n_s$, $n_b$) taken from Table \ref{tab:nem}.
153:
154: % par 21
155: To calibrate the performance of our method, we generate a large number of simulated experiments for several input top quark mass values. We refer to each of these experiments as an ensemble. Each ensemble consists of as many events of each type as we have in our collider data sample. A given event is taken from the signal and background samples with probabilities that correspond to the fraction of events expected from each sample. We use a quadratic function of $m_t$ to fit the $-\ln L$ points to thirteen mass points centered on the point with the smallest value of $-\ln L$. The distribution of measured top quark mass values from the ensemble fits gives an estimate of the parent distribution of our measurement. The ensemble test results indicate that the measured mass tracks the input mass with an offset of $1.9\pm0.8$~GeV, which we correct for in the final result.
156:
157: % par 22
158: In general, the tails of the likelihood distribution for an ensemble are not well approximated by a Gaussian. Thus it is necessary to restrict the range of mass points that is included in the fit to points near the observed minimum in $-\ln L$. For small data samples, however, there is a substantial statistical uncertainty in the computed likelihood values which can be reduced by increasing the number of mass points used in the fit. Thus the range of mass points that are included in the likelihood fit must be optimized for the observed data sample size to obtain the best possible agreement between measured top quark mass and input top quark mass. This was done for both analyses based on Monte Carlo ensembles that contain exactly as many events as we observe in the data.
159:
160: % par 23
161: The \MWT\ analysis uses the no-tag and $b$-tag samples of events. Separating out the very-low-background $b$-tagged events improves the precision of the result.
162: The analysis is performed with separate templates for $ee$, $e\mu$, and $\mu\mu$ events and separate signal-to-background fractions for events without a $b$-tag and $\geq1$ $b$-tags. The maximum of the joint likelihood for all events, shown in Fig.~\ref{fig:fit}, corresponds to $m_t=176.2\pm9.2(\mbox{stat})$~GeV after the offset correction. Figure \ref{fig:peak} shows the distribution of $m_{\rm peak}$ from collider data compared to the sum of Monte Carlo templates with $m_t=180$~GeV.
163:
164: \begin{figure}[htp]
165: \includegraphics[width=\figwidth]{fig01.eps}
166: \caption{\label{fig:fit} Joint likelihoods from the \MWT\ analysis (closed circles) and the \vWT\ analysis (open circles). The minima of the likelihood curves do not include the correction for the offset in the response.}
167: \end{figure}
168:
169: \begin{figure}[htp]
170: \includegraphics[width=\figwidth]{fig02.eps}
171: \caption{\label{fig:peak} Distribution of $m_{\rm peak}$ from the \MWT\ analysis (circles) compared to the sum of Monte Carlo templates for the no-tag and $b$-tag channels and all lepton flavors for $m_t=180$~GeV (open histogram). The shaded histogram indicates the background contribution.}
172: \end{figure}
173:
174: % par 24
175: The neutrino weighting technique (\vWT) ignores the measured $\mpt$ in reconstructing the event. Instead we assume a representative range of values for the pseudorapidities of the two neutrinos and the solution weight
176: $$w(m_t)=\frac{1}{N_\eta} \sum_{i=1}^{N_\eta} \exp\left[\frac{-({\mpx}_i-\mpx)^2}{2\sigma_x^2}\right] \exp\left[\frac{-({\mpy}_i-\mpy)^2}{2\sigma_y^2}\right]$$
177: characterizes the consistency of the resulting solutions with the observed $\mpt$. The sum is over the $N_{\eta}$ steps of neutrino rapidity values, ${\mpx}_i$ and ${\mpy}_i$ are the $x$ and $y$ components of the sum of the neutrino momenta computed for step $i$, and $\sigma_x$ and $\sigma_y$ are the measurement resolutions for ${\mpx}$ and ${\mpy}$. We then normalize the event weight $W(m_t)$ over the range $80<m_t<330$~GeV and integrate it over ten bins in $m_t$. Every event is thus characterized by a 9-component vector $\overrightarrow{W}=(W_1,...,W_9)$ (the $10^{th}$ bin is fixed by the first nine and the normalization condition). We compare the vectors from the collider data events to sets of $N$ Monte Carlo events generated with different values of $m_t$ by computing the signal probability
178: $$f_s(\overrightarrow{W}|m_t) = \frac{1}{N} \sum_{j=1}^N \prod_{i=1}^9 \frac{\exp[-(W_i-W_{ij}^{MC})^2/2h^2]}{\int_0^1 \exp[-(W'-W_{ij}^{MC})^2/2h^2]dW'},$$
179: where $\overrightarrow{W}_{j}^{MC}$ is the vector of weights from Monte Carlo event $j$. The value of the resolution parameter $h$ is optimized using ensemble tests based on simulated events to give the best agreement between input mass and measured mass. We compute a similar probability $f_b(\overrightarrow{W})$ for backgrounds and combine them in the likelihood
180: \begin{eqnarray*}
181: L(m_t,\overline{n}_b,n)=G(n_b-\overline{n}_b,\sigma)P(n_s+n_b,n)\\
182: \times\prod_{i=1}^n\left[\frac{n_sf_s(\overrightarrow{W}_i|m_t)+n_bf_b(\overrightarrow{W}_i)}{n_s+n_b}\right],
183: \end{eqnarray*}
184: which we optimize with respect to $m_t$, the number of signal events $n_s$, and the number of background events $n_b$. $G$ is a gaussian constraint on the difference between $n_b$ and the expected number of background events $\overline{n}_b$, and $P$ is a Poisson constraint on $n_s+n_b$ to the number of events $n$ observed in data.
185:
186: % par 25
187: The \vWT\ analysis uses the tight sample and the $\ell$+track sample.
188: The analysis is performed with separate templates for $ee$, $e\mu$, and $\mu\mu$ events in the tight sample and the two lepton flavors in the $\ell$+track sample. We fit the $-\ln L$ points for values of $m_t$ within 20 GeV of the point with the smallest value of $-\ln L$ with a quadratic function of $m_t$. The performance of the \vWT\ algorithm is checked using ensemble tests as described for the \MWT\ algorithm. The average measured values of $m_t$ track the input values with an offset of $1.7\pm0.2$~GeV. For the \vWT\ analysis, the maximum of the joint likelihood of all events (Fig.~\ref{fig:fit}) corresponds to $m_t=179.5\pm7.4(\mbox{stat})$~GeV after the offset correction.
189:
190: % par 26
191: We also use ensemble tests to study the size of systematic uncertainties (see Table~\ref{tab:summary}). By far the largest systematic uncertainty originates from the uncertainty in the calibration of the jet energy scale of 4.1\%. We determine the effect of the uncertainty on the measurement by generating ensemble tests with the jet energy scale increased and decreased by one standard deviation.
192:
193: % par 27
194: We estimate the sensitivity of the result to uncertainties in the parton distribution functions by analyzing ensembles generated with a range of available parton distribution function sets.
195: The next to largest uncertainty originates from the modeling of gluon radiation in the Monte Carlo. Gluon radiation can give rise to additional jets in the event. In the data about one third of the events have more than two jets. The two analyses used different procedures to estimate this effect. For the \vWT\ analysis, events with three reconstructed jets from $t\bar{t}+1$ parton events generated with {\sc alpgen} were analyzed in ensemble tests with templates derived from $t\bar{t}$ events with only two jets and the difference in reconstructed top quark mass was applied as an uncertainty to the fraction of events with more than two jets. In the \MWT\ analysis the fraction of events with only two jets was varied in ensemble tests within the range that is consistent with the jet multiplicity spectrum observed in the data and analyzed with the nominal templates. The observed variation in the result was applied as systematic error.
196:
197: % par 28
198: We estimate the effect of uncertainties in the shape of the background distributions to determine the background uncertainty. For the \MWT\ analysis we also perform tests with ensembles in which we varied the background fraction, which was fixed in the mass fit, by its uncertainty.
199: For the $\ell$+track sample, the heavy flavor content in the background is a significant source of uncertainty. This only contributed to the \vWT\ analysis.
200: The finite size of the Monte Carlo samples limits the statistical precision with which we can extract the top quark mass. This is accounted for in the Monte Carlo statistics uncertainty.
201: Finally, we generated ensembles with varied jet and muon momentum resolutions to estimate the effect of their uncertainties. The resulting uncertainties for the \vWT\ analysis are quoted in Table~\ref{tab:summary}. The effect on the result of the \MWT\ analysis was negligible.
202:
203: % par 29
204: We follow the method for combining correlated measurements from Ref.~\cite{Lyons} in combining the results from the \MWT\ and \vWT\ analyses. We determine the statistical correlation between the two measurements using ensemble tests. The correlation factor between the two analyses is $0.35$. The systematic uncertainties from each source in Table~\ref{tab:summary} are taken to be completely correlated between the two analyses. The results of the combination are also listed in Table~\ref{tab:summary}.
205:
206: \begin{table}[ht]
207: \caption{\label{tab:summary}Summary of dilepton mass measurements.}
208: \begin{ruledtabular}
209: \begin{tabular}{lrrrrrr}
210: & \MWT & \vWT & Combined \\ \hline
211: Top quark mass & 176.2 & 179.5 & 178.1 GeV \\ \hline
212: Statistical uncertainty & 9.2 & 7.4 & 6.7 GeV \\
213: Systematic uncertainty & 3.9 & 5.6 & 4.8 GeV \\ \hline
214: \ Jet energy scale & 3.6 & 4.8 & 4.3 GeV \\
215: \ Parton distribution
216: functions & 0.9 & 0.7 & 0.8 GeV \\
217: \ Gluon radiation & 0.8 & 2.0 & 1.5 GeV \\
218: \ Background & 0.2 & 1.4 & 0.9 GeV \\
219: \ Heavy flavor content & --- & 0.6 & 0.3 GeV \\
220: \ Monte Carlo statistics & 0.8 & 1.0 & 0.9 GeV \\
221: \ Jet resolution & --- & 0.6 & 0.3 GeV \\
222: \ Muon resolution & --- & 0.4 & 0.2 GeV \\ \hline
223: Total uncertainty & 10.0 & 9.3 & 8.2 GeV \\
224: \end{tabular}
225: \end{ruledtabular}
226: \end{table}
227:
228: % par 30
229: In conclusion, we measure the top quark mass in the dilepton channel. We obtain $m_t=178.1\pm6.7(\mbox{stat})\pm4.8(\mbox{syst})$~GeV as our best estimate of
230: the top quark mass. This is in good agreement with the world average $m_t=172.5\pm2.3$~GeV~\cite{world}, based on Run I and Run II data collected by the CDF and D\O\ Collaborations.
231:
232: \input acknowledgement_paragraph_r2.tex
233:
234: \begin{thebibliography}{99}
235: \input list_of_visitor_addresses_r2.tex % input visitors address
236:
237: \bibitem{sm} S.L. Glashow, Nucl. Phys. {\bf22}, 579 (1961); S. Weinberg, Phys. Rev. Lett. {\bf19}, 1264 (1967); A. Salam, in Elementary Particle Theory: Relativistic Groups and Analyticity (Nobel Symposium No. 8), edited by N. Svartholm (Almqvist and Wiksell, Stockholm, 1968), p. 367.
238:
239: \bibitem{Wrad}G.~Degrassi {\it et al.}, Phys. Lett. B {\bf418}, 209 (1998); G.~Degrassi, P.~Gambino, and A.~Sirlin, ibid. {\bf394}, 188 (1997).
240:
241: \bibitem{run2det} D\O\ Collaboration, V.M.~Abazov, {\it et al.}, Nucl. Instrum. and Methods A {\bf565}, 463 (2006).
242:
243: \bibitem{run1det} D\O\ Collaboration, S. Abachi {\it et al.}, Nucl. Instrum. Methods Phys. Res. A {\bf338}, 185 (1994).
244:
245: \bibitem{xsec} D\O\ Collaboration, V.M.~Abazov, {\it et al.}, Phys. Lett. {\bf B626}, 55 (2005).
246:
247: \bibitem{jetalgo} U.~Baur (ed.), R.~K.~Ellis (ed.), and D.~Zeppenfeld (ed.), FERMILAB-PUB-00-297 (2000).
248:
249: \bibitem{jetscale} see for example D0 Collaboration, V.M.~Abazov {\it et al.}, Phys. Rev. {\bf D75}, 092001 (2007).
250:
251: \bibitem{btag} D\O\ Collaboration, V. M. Abazov {\it et al.}, Phys. Lett. B {\bf626}, 35 (2005).
252:
253: \bibitem{alpgen} M. L. Mangano {\it et al.}, JHEP {\bf0307}, 001 (2003);
254: M. L. Mangano, M. Moretti, and R. Pittau, Nucl. Phys. B {\bf632}, 343 (2002)
255: F. Caravaglios {\it et al.}, Nucl. Phys. B {\bf539}, 215 (1999).
256:
257: \bibitem{CTEQ5}H. L. Lai, {\it et al.}, Eur. Phys. J. C {\bf12}, 375 (2000).
258:
259: \bibitem{pythia}T. Sj\"ostrand {\it et al.}, Computer Physics Commun. {\bf135}, 238 (2001).
260:
261: \bibitem{geant}R.~Brun and F.~Carminati, CERN Program Library Long Writeup W5013 (1993).
262:
263: \bibitem{RunI}D\O\ Collaboration, B.~Abbott {\it et al.}, Phys. Rev. Lett. {\bf80}, 2063 (1998); Phys. Rev. D {\bf60}, 052001 (1999).
264:
265: \bibitem{DalitzGoldstein}R.H. Dalitz and G.R. Goldstein, Phys Rev. D {\bf45}, 1531 (1992).
266:
267: \bibitem{Kondo}K. Kondo, J. Phys. Soc. Jpn. {\bf57}, 4126 (1988); {\bf60}, 836 (1991).
268:
269: \bibitem{Lyons} L.~Lyons, D~Gibaut, and P.~Clifford, Nucl. Inst. Meth. A{\bf270}, 110 (1988).
270:
271: \bibitem{world}The Tevatron Electroweak Working Group for the CDF and D\O\ Collaborations, hep-ex/0603039.
272:
273: \end{thebibliography}
274:
275: \end{document}
276: %
277: % ****** End of file apssamp.tex ******
278: