1: \documentstyle[times,pramana,epsf,floats]{ias}
2:
3: \newcommand{\fixme}[1]{{\it\bf fixme:\ #1}}
4:
5: \begin{document}
6: \mark{{Data Acquisition in the EUDET Project}{J. Mnich and M. Wing}}
7: \title{Data Acquisition in the EUDET Project}
8:
9: \author{J. Mnich$^a$ and M. Wing$^b$}
10: \address{$^a$ Deutsches Elektronen-Synchrotron DESY,
11: Notkestr. 85, 22607 Hamburg, Germany \\
12: $^b$ Dept. of Physics and Astronomy, University College London, Gower Street, London WC1E 6BT, UK
13: }
14: \pacs{2.0}
15: \abstract{
16: The goal of the EUDET project is the development and construction of infrastructure
17: to permit detector R\&D for the International Linear Collider (ILC) with larger scale
18: prototypes. It encompasses major detector components: the vertex detector, the tracker
19: and the calorimeters. We describe here the status and plans of the project with emphasis
20: on issues related to data acquisition for future test beam experiments.
21: }
22:
23: \maketitle
24:
25: \section{Introduction}
26: EUDET~\cite{eudetweb} is a project supported by the European Union in the
27: Sixth Framework Programme structuring the European Research Area~\cite{CORDIS}.
28: The project is an Integrated Infrastructure Initiative (I3) which aims to create
29: a coordinated European effort towards research and development for ILC detectors.
30: The emphasis of the project is the creation and improvement of infrastructures to
31: enable R\&D on detector technologies with larger prototypes. After establishing
32: several new technologies to match the required ILC detector performances, the
33: construction of and experimentation with larger scale prototypes to demonstrate the
34: feasibility of these detector concepts is the next important step towards the design
35: of an ILC detector. Such larger detectors generally require cooperation between
36: several institutes and EUDET is intended to provide a framework for European and also
37: Global collaboration.
38:
39: The project comprises 31 European partner institutes from 12 different countries
40: working in the field of High Energy Physics. In addition, 23 associated institutes
41: will contribute to and exploit the EUDET research infrastructures. The project
42: started in January 2006 and will run for four years providing additional funding of
43: 7\,MEuros from the European Union. In addition significant resources are committed
44: by the participating institutes.
45:
46: EUDET contributes to the development of larger prototypes of all detector components
47: for which major R\&D efforts are ongoing: vertex and tracking detectors as well as
48: calorimeters. The project is organised in three Joint Research Activities:
49: test beam infrastructure, infrastructure for tracking detectors and infrastructure for
50: calorimeters, which are subdivided into several tasks addressing different detector types
51: and technologies. The project is complemented by networking activities, the tasks of which
52: include support for information exchange and common analysis tools as well as a transnational
53: access scheme through which the use of the DESY test beam and, at a later stage, the
54: exploitation of the infrastructures by European research groups is subsidised.
55:
56: With the increasing size and complexity of detector prototypes data acquisition issues
57: become more and more important. For some of the EUDET infrastructures the development of a
58: DAQ system is part of the project and first conceptual ideas have been developed. Even
59: though it is certainly to early to design the final DAQ system it is instrumental to
60: exchange ideas, homogenise concepts across sub-detector boundaries and thus prepare the
61: ground for an integrated concept for the ILC detector. In EUDET a coherent DAQ approach is
62: discussed for the large prototypes involved to facilitate combined test beam experiments.
63: Even though it was not part of the original project, discussions have started to evaluate
64: the feasibility in light of the very different demands of the detectors. It should also be
65: noted that efforts on coherent DAQ schemes are very welcome to advance the concept of the
66: Global Detector Network~\cite{GDN}.
67:
68:
69: \section{The Joint Research Activities}
70:
71: \subsection{Test Beam Infrastructure}
72:
73: This activity aims at improving the current test beam installation with a large bore magnet
74: of up to about 1 Tesla and a low mass coil. The magnet, called PCMAG, is provided by KEK,
75: one of the associated institutes. In addition a high resolution beam telescope made of pixel
76: detectors using Monolithic Active Pixel Sensors (MAPS) is under development~\cite{Tobias}.
77: Initially both
78: devices will be constructed and used at the DESY test beam facility but they are
79: transportable, as all EUDET infrastructures, and could be used later at other laboratories.
80:
81: \begin{figure}[htbp]
82: \epsfxsize=8cm
83: \centerline{\epsfbox{JRA1sketch.eps}}
84: \caption{Design of the DAQ system for the high resolution pixel telescope.}
85: \label{fig:JRA1sketch}
86: \end{figure}
87:
88: An important part of this project is the development of a DAQ system for the pixel
89: telescope. Fig.~\ref{fig:JRA1sketch} shows a first design of it. This task includes the
90: design of front-end electronics and data reduction boards. It will be complemented by a
91: special trigger logic unit. Some parts of the design, like the connection to the readout
92: computers, are not yet decided. A first demonstrator set-up of the telescope is scheduled
93: to become operational by mid 2007 and the full telescope by the end of 2008.
94:
95:
96:
97: \subsection{Infrastructure for Tracking Detectors}
98:
99:
100: Both options for the ILC central tracking detector, a high resolution TPC and a large
101: low-mass tracker consisting of silicon strip detectors, are addressed in this activity. The
102: TPC activity centres around the development and construction of a large field cage, to be
103: used inside PCMAG to test various options of micro pattern gas detectors which are under
104: study for the gas amplification at the end-plates. For the silicon tracking option
105: studies will concentrate on the design of a large and light mechanical structure, the cooling
106: aspects as well as on front-end electronics development.
107:
108: Together with the TPC field cage a general purpose readout system to be used with different
109: end-plate technologies will be provided. The design of this readout is based on existing
110: technologies, namely the ALTRO chip developed for the
111: ALICE experiment~\cite{altro}, which can provide the required high number
112: of channels at low cost.
113: It has also the potential to be further developed and tailored to the requirements of the
114: ILC TPC using new high integration technologies as they become available.
115: The TPC readout system will be complemented by an adequate DAQ system.
116: This infrastructure is schedule to be ready for first test beam measurements beginning of
117: 2008.
118:
119:
120: \subsection{Infrastructure for Calorimeters}
121:
122: This part of EUDET comprises the construction of a fully equipped module of the
123: electromagnetic calorimeter, a versatile stack for testing technologies for the hadron
124: calorimeter as well as calibration and sensor test devices for the forward calorimeter.
125: The development of front-end electronics and a DAQ system for the calorimeters also belong
126: to the project.
127:
128: \begin{figure}[htbp]
129: \epsfxsize=8cm
130: \centerline{\epsfbox{JRA3sketch.eps}}
131: \caption{Off-detector receiver design for calorimeters.}
132: \label{fig:JRA3sketch}
133: \end{figure}
134:
135: A conceptual design of the a DAQ system to be used with the electromagnetic and hadron
136: calorimeters exists. It is flexible and can be adapted to different options of the readout
137: electronics. Commercial products are used to ensure the system is inexpensive, scalable and
138: maintainable. Fig.~\ref{fig:JRA3sketch} shows the concept of the off-detector receiver card.
139: These cards will be mounted directly on PCI buses of the DAQ computers. This concept is
140: expected to provide a high-speed generic DAQ card available in 2009 for test beam experiments.
141:
142:
143: \section{Conclusions}
144:
145: Within the EUDET project, infrastructures for coming ILC detector R\&D with larger
146: prototypes will be developed and constructed in the next years. DAQ systems for the
147: calorimeters, vertex and tracking detectors are part of the project, which will permit
148: detailed test beam experiments in a few years. Efforts have started to investigate if the
149: concepts for these DAQ systems can be homogenised despite the partially diverging requirements
150: on the R\&D issues to be addressed by the different detectors. Obviously, any modification
151: and enlargement of the DAQ systems planned has to be accommodated within the time frame and
152: the resources of EUDET. The advantages and possible benefits are, however, numerous ranging
153: from combined test beam experiments to the valuable experience to be gained for the ILC
154: detector.
155:
156:
157: \section*{Acknowledgments}
158:
159: This work is supported by the Commission of the European Communities under the 6th Framework Programme
160: 'Structuring the European Research Area', contract number RII3-026126.
161:
162:
163: \begin{thebibliography}{99}
164: \bibitem{eudetweb}
165: More information about the project can be found at the URL http://www.eudet.org
166:
167: \bibitem{CORDIS}
168: More information on the framework programmes of the European Union can be found at
169: the URL http:/cordis.europa.eu/
170:
171: \bibitem{GDN}
172: % J. Mnich, Introduction to the Global Detector Network,
173: % Proceedings of LCWS04, Paris, April 2004.
174: J. Mnich, Introduction to the Global Detector Network,
175: Proceedings of LCWS05, Stanford, March 2005.
176:
177: \bibitem{Tobias}
178: T. Haas, "A Pixel Telescope for Detector R\&D for an International Linear Collider",
179: Proc. Conf. Vertex 2005, Chujenzi Lake Japan, to be publ. Nucl. Inst. A
180:
181: \bibitem{altro}
182: L. Musa et al., ``Front End Electronics for the ALICE-TPC Detector'', Proc. of the 4th
183: Workshop on Electronics for LHC Experiments, Rome, Sept. 21-25, 1998;
184: R. Esteve-Bosch et al., "The ALTRO Chip : A 16-channel A/D Converter and Digital Processor for
185: Gas Detectors",
186: Open Access article - Published in: IEEE Trans. Nucl. Sci. 50 (2003) 2460-69.
187:
188:
189: \end{thebibliography}
190: \end{document}
191: